Terratech, Inc.
1'20
,t.
AGREEMENT FOR PROFESSIONAL SERVICES (Project 7267/2)
THIS AGREEMENT is entered into by and between TERRATECH, INC., a California corporation (hereafter called
"TERRATECH") and (hereafter called "CLIENT").
The parties hereto agree as follows:
1. The property or location (hereafter called .PROJECT"), at which the PROFESSIONAL SERVICES set forth in this agreement are to be
performed, is described as follows:
In accordance with TERRATECH's agreement letter for Estimated Costs for Construction Inspection and Testing
Services, Project 7267/2, dated July 8, 1992, which is made a part hereof.
2. TERRATECH agrees to perform PROFESSIONAL SERVICES at the PROJECT, or elsewhere as appropriate, consisting of the following:
In accordance with TERRATECH's agreement letter for Estimated Costs for Construction Inspection and Testing
Services, Project 7267/2, dated July 8, 1992, which is made a part hereof.
3. In consideration of the PROFESSIONAL SERVICES to be performed by TERRATECH, CLIENT agrees to pay TERRATECH as follows:
In accordance with TERRATECH's agreement letter for Estimated Costs for Construction Inspection and Testing
Services, Project 7267/2, dated July 8, 1992, which is made a part hereof.
4. CLIENT will be invoiced monthly, as the PROFESSIONAL SERVICES are performed, unless otherwise provided by this agreement. Each
invoiced amount shall be due and payable upon receipt. Interest on past due balances shall accrue at the rate of one and one-half percent (1 1/2 %)
per month (but not exceeding the maximum rate allowed by law), payments thereafter received to be applied first to accrued interest and then to
principal amount.
5. Any change order or additional work to be performed by TERRA TECH in connection with the PROJECT shall be effected by execution of a
SUPPLEMENTAL AGREEMENT FOR PROFESSIONAL SERVICES which, except to the extent that this agreement is expressly modified, shall be
governed by each and every term of this agreement.
6. TERRATECH's liability for damages arising from any claimed error, omission, or other professional negligence shall be limited to twenty-five
thousand dollars ($25,000.00) or the fee to be paid by CLIENT, whichever is less. At CLIENT'S election, TERRATECH will waive this limitation
on its liability in consideration of the payment by CLIENT to TERRATECH of the greater of five hundred dollars ($500.00) or ten percent or (10%)
of the charges billed in connection with the PROJECT. CLIENT's fee for such waiver, in the sum of Not Applicable . Shall be payable in
full within seven (7) days after the execution of this agreement; failure to remit payment within such period shall void CLIENT's election to purchase
such waiver. IF CLIENT ELECTS TO PURCHASE SUCH WAIVER OF LIMITATION OF LIABILITY, CLIENT SHOULD SO INDICATE BY
INITIALLING HERE:
7. TERRATECH shall perform its PROFESSIONAL SERVICES hereunder in accordance with generally accepted professional practice in its fields
of specialty. No other warranty or representation, either express or implied, is included or intended in our proposal, agreements, or reports.
8. In the event that CLIENT requests termination of TERRATECH's PROFESSIONAL SERVICES prior to completion thereof under this
agreement, TERRATECH reserves the right to complete such analyses, records and reports as may be necessary to place its file in order and to
protect its reputation for professional competence. All files, drawings, samples and reports shall remain the property of TERRATECH, in
TERRATECH's discretion, until TERRATECH has received payment in full for its PROFESSIONAL SERVICES.
9. TERRATECH will diligently proceed to complete the PROFESSIONAL SERVICES described in this agreement in a timely manner. However,
it is expressly agreed that TERRATECH shall not be held responsible for delays in performance occasioned by factors beyond TERRATECH's
control.
%
10. 1ft the eveRt that litigetiaR Ileeames Reees9ftl'Y te eftfaree ItftY term af pravisiaR af this agreemeftt, the pre'.'ailiftg pafty in sllek Iitigatian ~
efttitled t-o reeaver reaseRaIlle 8lteraey' s fees lIml 8ests iR aQQitieR tg SY~R ethllr rlllief &8 !Ray be graatllQ by thll ~ou1't iA thll IitigatioA'
Dated: July 8, 1992
TERRATECH INC. ~
By:C?L4~~.. . ~
BY:
BY: Robert M. Fontanilla. Manal!:er. Construction Services Deoartment
BY:
7891 WESTWOOD DRIVE, SUITE 101 GILROY, CALIFORNIA 95020 (408) 842-0236 FAX (408) 842-7314
July 8, 1992
Project 7267/2
Mr. Bob COrllully
CITY OF GILROY
7351 Rosanna Street
Gilroy, California 95020
/>1 "._ ,:, :: .
\......-(,~,,"'l t...:., -1;.:::/'" ,.I""'J ....eo
/l
\f
Subject: Agreement for Estimated Costs for Construction Inspection and
Testing Services
Expansion of Gilroy City Hall
Gilroy, California ._.
Dear Mr. CernollJ:' Cn.t......I/U~"'.
Thank you for expressing interest in Terratech's Construction Inspection and
Testing Services for the Expansion of Gilroy City Hall project. As requested,
we have prepared this agreement to provide these services.
TERRATECH will perform the scope of work listed in support of and under the
direction of your designated staff representatives. We will perform this work
with certified and experienced personnel fully equipped to perform the
required tests and services. All work will be done in accordance with project
plans and specifications, and in accordance with the requirements outlined in
Section 306 of the Uniform Building Code.
SCOPE OF WORK
The scope of our work will be limited to the following:
1. Observe and advise during demolition, site clearing and stripping, and
subexcavation within building areas.
2. Test and advise on acceptability of proposed import fill, prior to
delivery to site.
3. Observe, test and advise during subgrade preparation, and placement of
structural fill in all areas where reprocessing will be carried out,
and/or new imported fill will be placed.
4. Observe and advise on building foundation excavations.
5. Observe and advise on suitability and placement of capillary break
materials and placement of vapor barriers.
1365 VANDER WAY
225-K CANNERY ROW
SAN JOSE, CA 95112
MONTEREY, CA 93940
(408) 297-6969
(408) 372-3716
FAX (408) 297-7716
FAX (408) 372-7481
July 8, 1992
Project 7267/2
6. Perform special inspections and tests per UBC Section 306 and the
general notes in the project plans and specifications for the following:
A. Review concrete mix designs.
B. Reinforced concrete for footings, piers and slabs. This would
i ncl ude inspection of steel rei nforcement, conti nuou-s inspection
during placement of concrete, concrete field sampling and testing,
and laboratory compression strength testing of concrete cylinders.
C. Structural steel shop and field welding.
D. Installation and pull-out tests of epoxy anchors.
ESTIMATED FEES
TERRATECH will provide the specified testing and inspection services on a time
and materials basis in accordance with the appended Fee Schedule{s} modified
for discount in the following manner:
1. No daily minimum charges will be used. The client will be billed only
for time spent on the job site, and for nominal charges for time spent
by supervisory personnel in scheduling inspectors, engineering reviews
and charges for preparation of required documentation.
3. A 5% discount on all invoice amounts will be extended for prompt {30 day
net} payment.
As you are aware, the testing laboratory's involvement in a project such as
this is directly influenced by the contractor's and sub-contractors' methods,
scheduling and performance. Our involvement will be further influenced by the
supplier's deliverables, the client's project manager's requests and the
contractor/designer change order process. Therefore it is impossible for us
to absolutely identify our scope and costs on a guarantee not to exceed basis
without built-in contingency charges which are not in the client's financial
interest. TERRATECH submits the following fee scenario for the purpose of
this estimated cost agreement and the client's project budgeting.
GRADING OF BUILDING PAD AREAS
Z 12 hours (2 days) @ $57.00/hr.
{$50.00/hr. technician + $7.00/hr.
1 laboratory compaction curve for
proposed import @ $150.00 each
Reports, supervision and review,
administration
= $ 684.00
equipment}
Grading Subtotal
= 150.00
= 350.00
$ 1,184.00
=
2
6 TERRATECH. INC.
July 8, 1992 Project 7267/2
FOUNDATION EXCAVATIONS/CAPIllARY BREAKS
~ 6 hours (4 site visits) @ $50.00/hr. = $ 342.00
Reports, supervision and review,
administration = 350.00
Foundation/Capillary Break Subtotal = $ -692.00
REINFORCED CONCRETE
1 Mix Design Review @ $70.00 each = $ 70.00
+ 4 hours (4 site visits) steel inspection
@ $50.00/hr. = 200.00
~ 12 hours (4 site visits) concrete inspection
@ $50.00/hr. = 600.00
~ 4 sets (of 4 each) concrete cylinders
@ $15.00 each = 240.00
Reports, supervision and review,
administration = 300.00
Reinforced Concrete Subtotal = $ 1,410.00
STRUCTURAL STEEL WELDING
~ 8 hours shop (2 trips) @ $60.00/hr. = $ 600.00
~ 4 hours field (1 trip) @ $60.00/hr. = 240.00
Reports, supervision and review,
administration = 250.00
Structural Steel Welding Subtotal =
$ 1,090.00
EPOXY ANCHORS INSTALLATION AND PULL-OUT
~ 4 hours installation (2 trips)
@ $50.00/hr. = $ 200.00
~ 6 hours pull-out testing (2 trips) @ $55.00/hr.
($50.00/hr. tech. + $5.00/hr. equipment) = 330.00
Reports, supervision and review,
administration = 300.00
Epoxy Anchors Subtotal =
$ 830.00
TOTAL ESTIMATED TESTING AND INSPECTION FEE
FOR ABOVE SCOPE OF WORK
S 5.206.00
To prepare this fee scenario for our inspection and testing services we
reviewed the project plans and specifications and interviewed with the project
general contractor to obtain scheduling information. Written clarification of
the scope of work will be requested prior to the start of work.
3
Iii TERRATECH. INC.
July 8, 1992
Project 7267/2
If this agreement meets with your approval, please sign and return one copy of
the enclosed Agreement for Professional Services.
Again, thank you for your consideration of TERRATECH, INC. and we sincerely
look forward to working with you. If you have any questions, please call me
at (408) 842-0236.
Respectfully Submitted,
TERRATECH, INC.
Gl64 a(~
Robert M. Fontanilla
RMF /ksg
Enclosures
cc: Mr. Larry James, Chief Building Official
4
Iii TERRATECH, INC.
1365 VANDER WAY
7891 WESTWOOD DR.. SUITE 101
225-K CANNERY ROW
SAN JOSE. CA 95112
GILROY. CA 95020
MONTEREY, CA 93940
(408) 297-6969
(408) 842-0236
(408) 372-3716
FAX (408) 297-7716
FAX (408) 842-7314
FAX (408) 372-7481
LABORATORY SCHEDULE OF CHARGES
SOIL AND AGGREGATE
1. Accelerated Expansion (COE CRE-CI48): $200.00
2. Atterberg Limits:
Liquid Limit (ASTM 0-4318) $ 60.00
Plastic Limit (ASTM 0-4318) $ 60.00
Plasticity Index (ASTM 0-4318) $100.00
3. California Bearing Ratio (ASTM 0-1883):
Laboratory Compacted Soil,per point $170.00
4. Cleanness Test (Caltrans Test 227 & 420) $ 65.00
5. Compaction of Soils:
ASTM 0-1557 procedure" A or B" $150.00
ASTM 0-1557 procedure "C" $175.00
Caltrans test 216 part II $145.00
ASTM 0-698 procedure "A or B" $130.00
ASTM 0-698 procedure "C" $155.00
Check Point (ASTM or Caltrans) $ 60.00
Maximum/Minimum index (ASTM 0-4253 &4254)
0.1 cu. ft. $145.00
0.5 cu. ft. $205.00
6. Consolidation (ASTM 0-2435):
One-dimensional, per load $ 80.00
7. Crushed Particles:
Per primary size (Caltrans Test 205) $ 75.00
8. Direct Shear:
Residual Strength, per point $145.00
Undisturbed, undrained, per point $125.00
Remolded, undrained, per point $180.00
9. Durability:
per size fraction (Caltrans Test 229) $ 85.00
10. Expansion Index (ASTM 0-4829) $120.00
11. Freeze and Thawing (ASTM C-666) $225.00
12. Friable Particles (ASTM 0-142) $ 55.00
13. Lightweight Pieces (ASTM C-123) $ 55.00
14. Los Angeles Abrasion (Caltrans Test 211):
100/500 Revolutions $140.00
1000 Revolutions $160.00
15. Particle Size Analyses:
% passing #200 only (ASTM 0-1140, C-117) $ 45.00
Sieve Analysis, including wash (ASTM C-136) $ 65.00
Sieve Analysis, without wash (6" - #4) $ 45.00
Pit Run, including wash (ASTM C-136) $100.00
Hydrometer analysis (ASTM 0-422) $ 90.00
Effective 05/15/92 - Subject 10 revision.
1365 VANDER WAY
7891 WESTWOOD DR, SUITE101
225-K CANNERY ROW
SAN JOSE, CA 95112
GILROY, CA 95020
MONTEREY, CA 93940
(408) 297-6969
(408) 842-0236
(408) 372-3716
FAX (408) 297-7716
FAX (408) 842-7314
FAX (408) 372-7481
16. Penneability:
Constant head (ASTM D-2434) $160.00
Falling head undisturbed Sample (EPA9100) $210.00
Falling head fabricated Sample (EPA9100) $245.00
Surcharge for non-water permeant $100.00
17. Ph Testing $ 15.00
18. R-Value:
Treated (ASTM D-2844) $200.00
Untreated (ASTM D-2844) $180.00
19. Sand Equivalent:
(Caltrans test 217) $ 75.00
20. Specific Gravity/Absorption:
Coarse Aggregate (ASTM C-127) $ 60.00
Fine Aggregate (ASTM C-128) $ 60.00
Soils, Pycnometer Method (ASTM D -854) $ 70.00
21. Soundness of Aggregate (ASTM C-88):
Magnesium or Sulfate, 5 cycle, per fraction $ 65.00
22. Swell - Compression:
Fabricated Sample (ASTM D-4546) $130.00
Undisturbed Sample (ASTM D-4546) $115.00
23. Triaxial Compression, per hour, (ASTM D-4767) $ 60.00
24. Unconfined Compression (ASTM D-2166) $ 60.00
25. Unit Weight & Voids in Aggregate (ASTM C-29) $ 45,00
26. Water Content (ASTM D-2216) $ 15.00
27. Water Content and Dry Density, undisturbed sample $ 25.00
28. Flat and Elongated Particles $ 90.00
29. Organic Impurities (ASTM C-40) $ 45.00
Effective 05/15/92 - Subject to revision.
<#
1365 VANDER WAY
7891 WESTWOOD DR., SUITE101
225-K CANNERY ROW
SAN JOSE, CA 95112
GILROY, CA 95020
MONTEREY, CA 93940
(408) 297-6969
(408) 842-0236
(408) 372-3716
FAX (408) 297-7716
FAX (408) 842-7314
FAX (408) 372-7481
ASPHALT A1\T}) ASPHALT CONCRETE
1.
Hveem Mix:
Mix Design (Caltrans Test 303 & 304)
Compacted Point (lab mix)
Compacted Point (plant mix)
Stabilometer (S-Value)
Marshall Mix:
Mix Design (ASTM D-1559)
Compacted Point, lab mix (set of three)
Compacted Point, plant mix (set of three)
Stability and Flow (set of three)
Stability and Flow, core sample
Retained Stability
Theoretical Specific Gravity (ASTM D-2041)
Specific Gravity Core Sample:
Core Sample SSD (ASTM D-2726)
Core Sample Paraffin Coated (ASTM D-1188)
Extraction:
Oil Content (ASTM D-2172)
Grading of Extracted Aggregate
Water Content of Plant Mix
Centrifuge Kerosene Equh'alent (CKE)
Coarse (Caltrans Test 303)
Fine (Caltrans Test 303)
Apparent, Kerosene Method
Film Stripping (Caltrans Test 302)
Analysis of Built-up Roofs (ASTM D-2829):
Ply count, separation, bituminous content
Unit weight
2.
3.
4.
5.
6.
7.
8.
9.
PORTLAl\T}) CEMENT CONCRETE
1.
Compressive Strength Tests:
Standard Molded Cylindrical Specimen (ASTM C-39)
Core sample, inc. end preparation (ASTM C-42)
Shotcrete, including preparation (ASTM C-1140)
Cylinders processed but not tested
Concrete mix review (UBC Sec 2605 (d))
Concrete mix design (ACI 211)
not including aggregate testing
Unit Weight of Concrete Cylinder:
Flexural Test of Concrete Beam (ASTM C-78 or C-293)
Laboratory Trial Batch (ASTM C- 192):
includes casting of 9 cylinders
aggregate testing not included
Splitting Tensile Strength (ASTM C-496)
Specific Gravity Hydraulic Cement (ASTM C-188)
2.
3.
4.
5.
6.
7.
8.
Effective 05/15/92 - Subjecllo revision.
Quotation
$140.00
$105.00
$ 55.00
Quotation
$145.00
$105.00
$ 55.00
$ 55.00
$370.00
$ 80.00
$ 30.00
$ 40.00
$ 90.00
$ 85.00
$ 15.00
$ 90.00
$ 95.00
$ 45.00
$ 65.00
$100.00
$ 30.00
$ 15.00
$ 55.00
$ 55.00
$ 12.00
$ 70.00
$120.00
$ 30.00
$ 55.00
$300.00
$ 40.00
$ 45.00
.
. .
1365 VANDER WAY
7891 WESTWOOD DR., SUITE 101
225-K CANNERY ROW
SAN JOSE, CA 95112
GILROY, CA 95020
MONTEREY, CA 93940
(408) 297-6969
(408) 842-0236
(408) 372-3716
FAX (408) 297-7716
FAX (408) 842-7314
FAX (408) 372-7481
MASONRY
1.
Absorption Test:
Masonry Unit (ASTM C-140)
Brick Unit (ASTM C-67)
Compressive Strength Testing:
Brick Sample (ASTM C-67)
Brick Prism (UBC 2426)
Grout Sample (ASTM C-I019)
Mortar Sample (ASTM C-39)
Masonry Unit (ASTM C-140)
Masonry Prism, S"x S"x 16" (UBC 2426)
Masonry Prism, other sizes (UBC 2426)
Masonry Core
Effiorescence of Brick, set of five, (ASTM C-67)
Linear Shrinkage, set of three, (ASTM C-426)
Water Content of Masonry Unit (ASTM C-140)
2.
3.
4.
5.
MISCELLANEOUS CONSTRUCTION MATERIALS
ROOFING
1.
2.
3.
4.
Roof Tiles - Breaking Load (UBC 32-12)
Roof Tiles - Absorption (UBC 32-12)
Built-up Roofing, Ply Count, Separation, Bituminous Content
Built-up Roofing, Cut Tests (Unit weight only)
FIRE PROOFING
1.
Laboratory Density (ASTM E-605)
REINFORCING STEEL
1.
Bar Bend Test (No.2 - No.8)
Bar Bend Test (No. 10 and above)
Bar Tensile Test (No 2. - No S)
Bar Tensile Test (No 10 and above)
Welder Certification, with Coupon Tests
2.
3.
Effective 05/15/92 - Subject to revision.
$ 50.00
$ 45.00
$ 40.00
$ 45.00
$ 20.00
$ 15.00
$ 50.00
$ 55.00
Quotation
$ 55.00
$ 75.00
$120.00
$ 30.00
$ 20.00
$ 50.00
$100.00
$ 30.00
$ 55.00
$ 40.00
$ 70.00
$ 40.00
$ 70.00
Quotation