Loading...
HomeMy WebLinkAboutPierce Manufacturing - 2016 Agreement for Fire TruckPURCHASE CONTRACT FOR CITY OF GILROY FROM PIERCE MANUFACTURING, INC. This Purchase Contract ( "Contract ") is made and entered into on �P hem ber^2�2016, ( "Effective Date ") by and between the CITY OF GILROY, a municipal corporation existing under the laws of the State of California ( "CITY "), and Pierce Manufacturing, Inc., a Wisconsin corporation ("VENDOR"). Collectively the CITY and VENDOR shall be referred to as the Parties. RECITALS: A. CITY desires to purchase one Quantum PUC Pumper and all related equipment ( "Product ") from VENDOR, as specified in VENDOR's Product specifications dated November 20, 2015, which is attached hereto as Exhibit A and incorporated by reference. B. On December 21, 2015, VENDOR submitted to CITY Quote Number 41221 -15, which is attached hereto as Exhibit B and incorporated by reference. C. At its February 22, 2016 meeting, the City Council of the City of Gilroy approved the purchase of Product from VENDOR. D. In March 2016, VENDOR submitted to CITY a Performance and Payment Bond in the amount of $664,994.00, which is attached hereto as Exhibit C and incorporated by reference. E. CITY desires to engage VENDOR to provide this Product and VENDOR has offered to provide the Product in accordance with the following terms and conditions. NOW, THEREFORE, IT IS AGREED as follows: SECTION 1. PURCHASE CITY's purchase of Product from VENDOR under this Contract shall occur according to the terms and conditions stated in this Contract. The State of purchase is California. SECTION 2. PRICE AND TAXES The total price for the Product is $664,994.03, including California sales tax. CITY is exempt from federal excise and transportation taxes. SECTION 3. DELIVERY AND PERFORMANCE (a) Delivery. "Delivery" is defined to mean the physical transfer of the Product from VENDOR to CITY. Delivery of the Product shall occur at the City of Gilroy Fire Department, 7070 Chestnut Street, Gilroy, California 95020. Delivery of the Product is scheduled to be within 295 to 325 calendar days of the Effective Date of this Agreement, F.O.B, Gilroy, California. Risk of loss shall pass to CITY upon Delivery. (b) Inspection and Acceptance. Upon Delivery, CITY shall have 4823 - 1937- 1823v8 WAKHARIA104706083 fifteen (15) days within which to inspect the Product for substantial conformance to the material specifications, and in the event of substantial non - conformance to the material specifications, to furnish VENDOR with written notice sufficient to permit VENDOR to evaluate such non- conformance ("Notice of Defect'). Any product not in substantial conformance to material specifications shall be remedied by VENDOR within thirty (30) days from the Notice of Defect. In the event VENDOR does not receive a Notice of Defect within fifteen (15) days of Delivery, Product will be deemed to be in conformance with specifications and accepted by CITY. Notwithstanding any notice, if VENDOR for any reason fails to deliver the Product within the time specified, the CITY may terminate this Contract or any part thereof without liability except for goods previously provided and accepted. The CITY'S receipt or acceptance of all or part of a non - conforming delivery shall not constitute a waiver of any claim, right or remedy the CITY has under this Contract or applicable law. SECTION 4. PAYMENT CITY will pay the full purchase price of $664,994.03 ( "Purchase Price ") upon Delivery of the Product. SECTION 5. SHIPMENT AND INSPECTION VENDOR assumes full responsibility for all transportation, transportation scheduling, packing, handling, insurance, and other services associated with delivery of all products. No charges for transportation containers, packing, etc., will be allowed the vendor unless so specified in this Contract. All shipments shall be made to: City of Gilroy Fire Department, 7070 Chestnut Street, Gilroy, California 95020. Transportation charges shall be shown as a separate item on the invoice. The CITY may revise shipping instructions as to any goods not as yet shipped. The CITY shall have the right to inspect any or all of the goods at VENDOR'S place of business or upon receipt by the CITY. By reason of its failure to inspect the goods, the CITY shall not be deemed to have accepted any defective goods or goods which do not conform to the specifications provided or to have waived any of the CITY'S rights or remedies arising by virtue of such defects or non- conformance. VENDOR shall be responsible for payment of shipping for the return of any defective goods. Shipping documents and invoices must include the purchase order number. SECTION 6. WARRANTIES The following warranties and certifications are incorporated by reference herein and are attached as Exhibit D: One (1) Year basic apparatus material and workmanship warranty (WA0008) 2. Detroit Diesel five (5) year limited engine warranty 3. Sheppard three (3) year steering gear warranty (WA0050) 4823 - 1937- 1823v7 -2- MVAKHARIA104706083 4. Pierce custom chassis frame fifty (50) year structural integrity limited warranty (WA0013) 5. Meritor Wabco ABS Brake System three (3) year warranty (WA0232) 6. Pierce ten (10) year structural integrity custom cab limited warranty (WA0012) 7. Pierce ten (10) year pro -rated paint and corrosion custom body warranty (WA0057) 8. Pierce two (2) year material and workmanship power step warranty (WA0031) 9. Pierce Command Zone five (5) year electronics warranty (WA0014) 10. Pierce fifty -four (54) month camera system warranty (WA0188). 11. Pierce ten (10) year 12 volt DC LED strip lights compartment light warranty (WA0203) 12. Allison five (5) year transmission warranty 13. Five (5) year transmission cooler warranty (WA0216) 14. Pierce ten (10) year structural integrity apparatus body limited warranty (WA0009) 15. AMDOR ten (10) year roll -up door limited warranty 16. Pierce six (6) year PUC pump warranty (WA0039) 17. Pierce ten (10) year body limited pro -rated cab paint warranty (WA0055) 18. Pierce Goldstar three (3) year Goldstar gold leaf lamination warranty (WA0018) 19. Pierce Cab Integrity (Certification Document CD0010) 20. Pierce Power Steering System (Certification Document CD0098) 21. Pierce Quantum Air Conditioning. (Certification Document CD0045) 22. United Plastic Fabricating, Inc. Tank Lifetime Service Warranty 23. Pierce one (1) year materials and workmanship foam system (WA0231) 24. Pierce ten (10) year materials and workmanship — stainless steel piping (WA0035) 25. Pierce Statement of Compliance to NFPA 1901 -2009 Vehicle Stability (Certification Document CD0089) 26. Detroit Diesel Limited Warranty on DD 13 Engines used in Fire Truck or Crash Vehicle Applications 4823- 1937- 1823v7 -3- WAKHARIA104706083 SECTION 7. INDEMNITY VENDOR shall defend, through counsel approved by CITY (which approval shall not be unreasonably withheld), indemnify and hold harmless CITY, its elected and appointed officials, representatives, attorneys, agents and employees from and against any and all suits, damages, costs, fees, claims, demands, causes of action, losses, liabilities and expenses, including without limitation attorneys' fees, arising or resulting directly or indirectly from any act or omission of VENDOR or VENDOR'S assistants, employees or agents, including all claims relating to the injury or death of any person or damage to any property, except to the extent those claims arise out of CITY'S sole negligence or intentional misconduct. SECTION 8. INSURANCE In addition to any other obligations under this Contract, VENDOR shall, at no cost to CITY, obtain and maintain throughout the term of this Contract: (a) Commercial Liability Insurance on a per occurrence basis, including coverage for owned and non -owned automobiles, with a minimum combined single limit coverage of $1,000,000 per occurrence for all damages due to bodily injury, sickness or disease, or death to any person, and damage to property, including the loss of use thereof; and (b) Automobile Liability insurance in the amount of $1,000,000; and (c) Workers' Compensation and Employers' Liability Insurance in the amount of $1,000,000 per accident. As a condition precedent to CITY's obligations under this Contract, VENDOR shall furnish written evidence of such coverage (naming CITY, its officers and employees as additional insureds on the Commercial Liability insurance policy referred to immediately above via a specific endorsement) and requiring thirty (30) days written notice of policy lapse or cancellation or of a material change in policy terms. SECTION 9. TERMINATION In the event this Contract is cancelled or terminated by a party before completion, VENDOR may charge a cancellation fee. The following charge schedule .based on costs incurred may be applied: (1) 10% of the Purchase Price after order is accepted and entered by VENDOR; (b) 20% of the Purchase Price after completion of approval drawings; and (c) 30% of the Purchase Price upon any material requisition. The cancellation fee will increase accordingly as costs are incurred as the order progresses through engineering and into manufacturing. VENDOR endeavors to mitigate any 4823.1937- 1823v7 4- MVAKHARIA104706083 such costs through the sale of such Product to another purchaser; however, CITY shall remain liable for the difference between the Purchase Price and, if applicable, the sale price obtained by VENDOR upon sale of the Product to another purchaser, plus any costs incurred by VENDOR to conduct any such sale. SECTION 10. REMEDIES In the event of VENDOR'S breach of this Contract, CITY may take any or all of the following actions, without prejudice to any other rights or remedies available to the CITY by law: (a) require VENDOR to repair or replace such goods, and upon VENDOR'S failure or refusal to do so, repair or replace the same at VENDOR'S expense; (b) reject any shipment or delivery containing defective or nonconforming goods and return for credit or replacement at VENDOR'S option, said return to be made at VENDOR'S cost and risk; (c) cancel any outstanding deliveries and treat such breach by VENDOR as VENDOR'S repudiation of this Contract. In the event of the CITY's breach hereunder, VENDOR'S. exclusive remedy shall be VENDOR'S recovery of the goods or the purchase price payable for goods shipped prior to such breach. SECTION 11. COMPLIANCE WITH ALL LAWS VENDOR warrants that it will comply with all federal, state, and local laws, ordinances, rules and regulations applicable to its performance under this Contract. VENDOR shall obtain and maintain throughout the life of the Contract all permits or licenses required in connection with the manufacture, sale, and shipment of the products ordered under this Contract. SECTION 12. ASSIGNMENT VENDOR shall not delegate or subcontract any duties and. services or assign any rights or claims under this Contract without the CITY'S prior written consent. SECTION 13. ARTWORK, DESIGNS, PATENTS, COPYRIGHTS, AND TRADEMARKS VENDOR hereby agrees that the sale, use or incorporation into manufactured products of all machines, software, hardware, materials and other devices furnished under this Contract are free and clear of infringement of any valid patent, copyright, or trademark. VENDOR shall hold the CITY harmless from any and all costs and expenses, including attorney fees, liability, and loss of any kind growing out of claims, suits or actions alleging such infringement, and VENDOR agrees to defend such claims, suits or actions. SECTION 14. GOVERNING LAW AND VENUE This Contract shall be governed by and construed in accordance with the laws of the State of California without regard to the conflict of laws provisions of any jurisdiction. The exclusive 4823- 1937- 1823v7 MVAKHARIA104706083 jurisdiction and venue with respect to any and all disputes arising hereunder shall be in state and federal courts located in Santa Clara County, California. SECTION 15. WAIVER The waiver of any term, condition or provision hereof shall not be construed to be a waiver of any other such term, condition or provision, nor shall such waiver be deemed a waiver of a subsequent breach of the same term, condition, or provision. SECTION 16. NOTICES All notices hereunder shall be given in writing and mailed, postage prepaid, addressed as follows: To CITY: City of Gilroy Attn.: Finance Director 7351 Rosanna Street Gilroy, CA 95020 To VENDOR: Pierce Manufacturing, Inc. Attn..: Director of Order Management 21600 American Drive Appleton, WI 54912 SECTION 17. ENTIRE AGREEMENT; AMENDMENT This Agreement supersedes any and all prior agreements, whether oral or written, between the Parties hereto with respect to the rendering of services by VENDOR for CITY and contains all the covenants and agreements between the Parties with respect to the rendering of such services in any manner whatsoever. Each Party to this Contract acknowledges that no representations, inducements, promises or agreements, orally or otherwise, have been made by any Party, or anyone acting on behalf of any Party, which are not stated herein, and that no other agreement, statement or promise not contained in this Agreement shall be valid or binding. No other agreements or conversation with any officer, agent or employee of CITY prior to execution of this Agreement shall affect or modify any of the terms or obligations contained in any documents comprising this Agreement. Such other-agreements or conversations shall be considered as unofficial information and in no way binding upon CITY. This document may be amended only by written instrument, signed by both CITY and VENDOR. 4823 - 1937- 1823v7 -6- MVAKHARIA104706083 IN WITNESS WHEREOF, CITY and VENDOR have executed this Agreement the day and year first above written. CITY OF GILROY lol Gabriel A. Gonzalez, City Admin for Date 14PUT -tt Co APPROV ORM: 777 Andy Fab Acti g City Atto ey Pierce Man cturing, Inc. Date V ,� - d / U 4823- 1937- 1823v7 _7_ MVAKHARIA104706083 ACCORO� y CERTIFICATE OF LIABILITY INSURANCE DATE (MMiDDNYYY) 09/23/2016 THIS CERTIFICATE IS ISSUED AS A MATTER OF INFORMATION ONLY AND CONFERS NO RIGHTS UPON THE CERTIFICATE HOLDER. THIS CERTIFICATE DOES NOT AFFIRMATIVELY OR NEGATIVELY AMEND, EXTEND OR ALTER THE COVERAGE AFFORDED BY THE POLICIES BELOW. THIS CERTIFICATE OF INSURANCE DOES NOT CONSTITUTE A CONTRACT BETWEEN THE ISSUING INSURER(S), AUTHORIZED REPRESENTATIVE OR PRODUCER, AND THE CERTIFICATE HOLDER. IMPORTANT: If the certificate holder is an ADDITIONAL INSURED, the policy(ies) must be endorsed. If SUBROGATION IS WAIVED, subject to the terms and conditions of the policy, certain policies may require an endorsement. A statement on this certificate does not confer rights to the certificate holder in lieu of such endorsement(s). PRODUCER 1- 414 - 443 -0000 Hays Companies of Wisconsin, Inc. CONTACT " NAME: PHONE I FAX A/C No): 1200 North Mayfair Road, Suite 100 E-MAIL ADDRESS: INSURERS AFFORDING COVERAGE NAIC # 04/01/17 INSURER A: NATIONAL FIRE & MARINE INS CO 20079 Milwaukee, WI 53226 INSURED INSURER B,: TRAVELERS PROPERTY CAS CO OF AMER 25674 Pierce Manufacturing Inc. INSURERC: PHOENIX INS CO 25623 INSURER D: BERKLEY NAIL INS CO 38911 P.O. Box 2017 INSURER E: GENERAL AGGREGATE $ 5,000,000 INSURER F: $ 1,000,000_ Appleton, -WI 54912 -2017 COVERAGES CERTIFICATE NUMBER: 47941850 REVISION NUMBER. THIS IS TO CERTIFY THAT THE POLICIES OF INSURANCE LISTED BELOW HAVE BEEN ISSUED TO THE INSURED NAMED ABOVE FOR THE POLICY PERIOD INDICATED. NOTWITHSTANDING ANY REQUIREMENT, TERM OR CONDITION OF ANY CONTRACT OR OTHER DOCUMENT WITH RESPECT TO WHICH THIS CERTIFICATE MAY BE ISSUED OR MAY PERTAIN, THE INSURANCE AFFORDED BY THE POLICIES DESCRIBED HEREIN IS SUBJECT TO ALL THE TERMS, EXCLUSIONS AND CONDITIONS OF SUCH POLICIES. LIMITS SHOWN MAY HAVE BEEN REDUCED BY PAID CLAIMS_. INSR LTR TYPE OF INSURANCE. ADDL SUER POLICY NUMBER POLICY EFF ! MIDD /YYYY) POLICY EXP (MMfDD1YYYYl LIMITS A X COMMERCIAL GENERAL LIABILITY CLAIMS -MADE a OCCUR X 42 -GLO- 100190 -02 04/01/16 04/01/17 EACH OCCURRENCE $ 1,000,000 DAMAGE TO RENTED PREMISES Ea occurrence $ 500, 000 MED EXP (Any one person) $ Excluded PERSONAL 8 ADV INJURY $ 1,000,000 GENT AGGREGATE LIMIT APPLIES PER: X PRO- POLICY 17 JECT F LOC OTHER: GENERAL AGGREGATE $ 5,000,000 PRODUCTS - COMP /OPAGG $ 1,000,000_ $ B AUTOMOBILE LIABILITY ANY AUTO ALL OWNED SCHEDULED .AUTOS AUTOS NON -OWNED HIRED. AUTOS AUTOS TJCAP11BD2004TIL16 10/01/16 10/01/17 COMBINED SINGLE LIMIT Me cci adent $ 1,000,_0_00 X BODILY INJURY (Per person) $ BODILY INJURY (Per accident) $ PROPERTY DAMAGE Peracoident $ i$ A X UMBRELLA L. B EXCESS LIAR X OCCUR CLAIMS -MADE 42 -UMO- 100191 -02 04/01/16 04/01/17 EACH OCCURRENCE $ 15,000,000 AGGREGATE $ 15,000,000 DED I I RETENTION $ $ B C WORKERS YIN AND EMPLOYERS' LUU91LnY ANY PROPRIETOR/PARTNER/EXECUTIVE ❑ OFFICER /MEMBER EXCLUDED? (Mandatory in NH) If yyes, describe under DESCRIPTION.OF OPERATIONS below NIA TRJDB117D757716 TC2NUB117D756516 10/01/16 10101116 10/01/17 10/01/17 X SPTEATUTE ERH E.L. EACH ACCIDENT $ 1,000,000 E.L. DISEASE - EA EMPLOYEE $ 1,006,000 E.L. DISEASE - .POLICY. LIMIT $. 1,000,000 D Excess Liability CEX0960017403 04/01/16 04/01/17 Ea Occ /Agg 10,000,000 DESCRIPTION OF OPERATIONS / LOCATIONS I VEHICLES (ACORD 101, Additional Remarks Schedule, may be attached If more space is required) Additional Insured when required by written contract. One (1) Pierce Quantum Pumper 30208 SHOULD ANY OF THE ABOVE DESCRIBED POLICIES BE CANCELLED BEFORE City of Gilroy Fire Department THE EXPIRATION DATE THEREOF, NOTICE WILL BE DELIVERED IN ACCORDANCE WITH THE POLICY PROVISIONS. 7070 Chestnut Street AUTHORIZED Gilroy, CA 95020 I ^w) USA ,�Tjj- ©1988 -21114 ACORD CORPnRATlnN All rinhfa rase .rl ACORD 25 (2014/01) The ACORD name and logo are registered marks of ACORD diannewandel 47941850 Berkshire Hathaway Specialty Insurance ENDORSEMENT This endorsement, effective 12:01 AM: 9/1/2016 Forms a part of Policy No.: 42- GLO- 100190 -02 Issued to: Oshkosh Corporation By: National Fire & Marine Insurance Company ADDITIONAL INSURED — DESIGNATED PERSON OR ORGANIZATION THIS ENDORSEMENT CHANGES THE POLICY. PLEASE READ IT CAREFULLY. This endorsement modifies insurance provided under the following: COMMERCIAL GENERAL LIABILITY COVERAGE PART SCHEDULE Name Of Additional Insured Person(s) Or Organization (s): City of Gilroy, its officers, officials and employees 7351 Rosanna Street Gilroy, CA 95020 Information required to complete this Schedule, if not shown above, will be shown in the Declarations. A. Section II — Who Is An Insured is amended to include as an additional insured the person(s) or organization(s) shown in the Schedule, but only with respect to liability for "bodily injury ", "property damage" or "personal and advertising injury" caused, in whole or in part, by your acts or omissions or the acts or omissions of those acting on your behalf: Page 1 1 CG 20 26 0413 © Insurance Services Office, Inc., 2012 1. In the performance of your ongoing operations; or 2. In connection with your premises owned by or rented to you. However: 1. The insurance afforded to such additional insured only applies to the extent permitted by law; and 2. If coverage provided to the additional insured is required by a contract or agreement, the insurance afforded to such additional insured will not be broader than that which you are required by the contract or agreement to provide for such additional insured. B. With respect to the insurance afforded to these additional insureds, the following is added to Section III — Limits Of Insurance: If coverage provided to the additional insured is required by a contract or agreement, the most we will pay on behalf of the additional insured is the amount of insurance: 1. Required by the contract or agreement; or 2. Available under the applicable Limits of Insurance shown in the Declarations; whichever is less. This endorsement shall not increase the applicable Limits of Insurance shown in the Declarations. All other terms and conditions of this policy remain unchanged. Page 2 1 CG 20 26 0413 © Insurance Services Office, Inc., 2012 (''1 � � GSFA is pleased to submit a proposal to the Gilroy Fire Department for a Pierce® multi purpose response vehicle per your request for quotation. The following paragraphs will describe in detail the apparatus, construction methods, and equipment proposed.. This proposal will indicate size, type; model and make of components parts and equipment, providing proof of compliance with each and every item (except where noted) in the departments advertised specifications. PIERCE MANUFACTURING was founded in 1913. Since then we have been building bodi hone philosophy, 'BUILD THE FINEST ". Our skilled craftsmen take pride in their work, wh'ch ied, in t he final product. We have been building fire apparatus since the early "forties" givi g ` Manufacturing over 60 years of experience in the fire apparatus market. Pierce Manufacturi has built and put into service more than 51,000 apparatus, including more than 27,000 o eotstom. chassis designed and built specifically for.fire and emergency applications. Our A le consin facility has over 757,000 total square feet of floor space situated on approximate cr land. Our Bradenton, Florida facility has 300,000 square feet of floor space situated on ximately 38 acres of land. Our beliefs in high ethical standards are carried through in a of our itments and to everyone with whom we do business. Honesty, Integrity, Accountability an itizen hip are global tenets by which we all live and work. Consequently, we neither engage in. nor have ever been convicted of price fixing, bid rigging, or collusion in any domestic or internatio re apparatus market. Pierce has only one brand of fire apparatus "Pier a ng you are receiving top of the line product that meets your specification. In accordance with the current edition o ,901 standards, this proposal will specify whether the fire department, manufacturer, or apps us alership will provide required loose equipment. Images and illustrative material i is oposal are as accurate as known at the time of publication, but are subject to change withou no e. ges and illustrative material is for reference only, and may include optional equipm cessories and may not include all standard equipment. GENERAL D AN CONSTRUCTION To control quality, e e compatibility, and provide a single source for service and warranty, the custom cab, sis, mp module and body will -be entirely designed, assembled /welded and painted in Pierce owne I ufacturing facilities. This includes, but not limited to the cab weldment, the pum ule assembly, the chassis assembly, the body and the electrical system. UAL Y AND WORKMANSHIP Pierce fi s set the pace for quality and workmanship in the fire apparatus field. Our tradition of building the highest quality units with craftsmen second to none has been the rule right from the beginning and we demonstrate that ongoing commitment by: Ensuring all steel welding follows American Welding Society D1.1 -2004 recommendations for structural steel welding. All aluminum welding follows American Welding society and ANSI 131.2 -2003 requirements for structural welding of aluminum. All I of 106 sheet metal welding follows American welding Society B2.1 -2000 requirements for structural welding of sheet metal. Our flux core are welding uses alloy rods, type 7000 and is performed to American Welding Society standards A5.20- E70T1. Furthermore, all employees classified as welders are tested and certified to meet the American welding Society codes upon hire and every three (3) years thereafter. Pierce also employs and American Welding Society certified welding inspector in plant during working hours to monitor weld quality. Pierce Manufacturing operates a Quality Management System under the requirements of ISO 01. These standards sponsored by the International Organization for Standardization (ISO) p 'fy th quality systems that are established by the manufacturer for design, manufacture, installation d service. A copy of the certificate of compliance is included with this proposal. In addition to the Quality Management system, we also employ a Quality e e Supplier program to insure the vendors and suppliers that we utilize meet the high tan ar we demand. That is just part of our overall "Quality at the Source" program at Pierce.. To demonstrate the quality of our products and services, a list of at t two (2) fire departments /municipalities that have purchased vehicles fo econd a is provided. DELIVERY The apparatus will be delivered under its own power re proper break -in of all components while the apparatus is still under warranty. A qualified presentative shall deliver the apparatus and remain for a sufficient length of time to instruct so nel in proper operation, care and maintenance of the equipment delivered. MANUAL AND SERVICE INFORNIV At time of delivery, complete ope I dnaintenance manuals covering the apparatus will be provided. A permanent plate wil in unted in the driver's compartment specifying the quantity and type of fluids required inclu g il, engine coolant, transmission, pump transmission lubrication, pump primer and drive a .4lng . SAFETY VIDIr At the time of deliv fierce will also provide one (1) 39- minute, professionally produced apparatus safety video ik DVD ormat. This video will address key safety considerations for personnel to follow When they a ing, operating, and maintaining the apparatus, including the following: vehicle pre - trip i hassis operation, pump operation, aerial operation, and safety during maintenance. PERF MANCE TESTS A road test will be conducted with the apparatus fully loaded and a continuous run of no less than ten (10) miles. During that time the apparatus will show no loss of power nor will it overheat. The transmission drive shaft or shafts and the axles will run quietly and be free of abnormal vibration or noise. The apparatus when fully loaded will not have less than 25 percent nor more than 50 percent on 2 of 106 the front axle; and not less than 50 percent nor more than 75 percent on the rear axle. The apparatus will meet NFPA 1901 acceleration and braking requirements. SERVICE AND WARRANTY SUPPORT Pierce dealership support will be provided by GSFA /GSEVS by operating a Pierce authorized service center. The service center will have factory- trained mechanics on staff versed in Pierce fire apparatus The service facility will be located within one hundred fifty (150) miles of the fire departmen . In addition to the dealership, Pierce has service facilities located in both, Weyauwega, Nonsinj9d Bradenton, Florida. Pierce also maintains a dedicated parts facility of over 100,000 sqin Appleton, Wisconsin. The parts facility stocks in excess of $5,000,000 in parts icatvice and replacement parts. The parts facility employs a staff dedicated solely for the d rib n and shipment of service and replacement parts. Service parts for the apparatus being proposed can be found via Piercepa7;-co, hich, is an. interactive online tool that delivers information regarding your specific app, us a l as the opportunity to register for training classes. As a Pierce customer you have the ability to view the complet ll of materials for your specific apparatus, including assembly drawings, piece part d ings, an eneficial parts notations. You will also have the ability to search the complete Pierce ite ter through a parts search function which offers all Pierce SKU's and descriptions offered olko apparatus. Published component catalogs, which include proprietary systems along with an to sive operators manual library is available for easy reference. Pierce Manufacturing maintains a dedi g24 Nice and warranty staff of over 35 personnel, dedicated to customer support, which also m ' hour 7 day a week toll free hot line, four (4) on staff EVTs, and offers hands -on repai d intenance training classes multiple times a year. Certification of insa veraae will be enclosed. Pierce Manuf cturingnc. provides an integrated approach to the design and manufacture of our products th . ers superior apparatus and a dedicated support team. From our facilities, the chassis, cab ent, , pumphouse (including the sheet metal enclosure, valve controls, piping and opera p 1) and body will be entirely designed, tested, and hand assembled to the customer's exact specifi ions. The electrical system either hardwired or multiplexed, will be both designed and integrated by Pierce Manufacturing. The warranties relative to these major components (excluding component warranties such as engine, transmission, axles, pump, etc.) will be provided by Pierce as a single source manufacturer. Pierce's single source solution adds value by providing a fully engineered product that offers durability, reliability, maintainability, performance, and a high level of quality. 3 of 106 Your apparatus will be manufactured in Appleton, Wisconsin. NFPA 2009 STANDARDS This unit will comply with the NFPA standards effective January 1, 2009, except for fire department directed exceptions. These exceptions will be set forth in the Statement of Exceptions. Certification of slip resistance of all stepping, standing and walking surfaces will be sup;sh ied th delivery of the apparatus. A plate that is highly visible to the driver while seated will be provided. This plate will t he verall height, length, and gross vehicle weight rating. Ab The manufacturer will have programs in place for training, proficiency testing d p ormance for any staff involved with certifications. An official of the company will designate, in writing, who is qualified to 4triorand certify test results. NFPA COMPLIANCY Apparatus proposed by the bidder will meet the applicable iremen of the National Fire Protection Association (NFPA) as stated in current edition at time of contr xecution. Fire department's specifications that differ from NFPA specifications a indic ed in the proposal as "non- NFPA ". To assure the vehicle is built to current NFPA s s the apparatus, in its entirety, will be third - party, audit - certified through Underwriters ar (UL) that it is built and complies to all applicable standards in the current edition of NFP a certification will include: all design, production, operational, and performance testing o of ly the apparatus, but those components that are installed on the apparatus. A placard will be affixed in a 've s'de area stating the third party agency, the date, the standard and the certificate numbe h )I vehicle audit. PUMP TEST Underwriters Labor (UL) will test, approved, and certify the pump. The test results and the pump manufacturer' certifi tion of hydrostatic test; the engine manufacturer's certified brake horsepower curve; and t p manufacturer's record of pump construction details will be forwarded to the Fire Depa GENE TOR TEST If the u it has a generator, Underwriters Laboratory (UL) will test, approved, and certify the generator. The test results will be provided to the Fire Department at the time of delivery. 4 of 106 BREATHING AIR TEST If the unit has breathing air, Pierce Manufacturing will draw an air sample from the air system and have the sample certified that the air quality meets the requirements of NFPA 1989, Standard on Breathing_ Air Quality. for Fire and Emergency Services Respiratory Protection. INSPECTION TRIPS) The bidder will provide two (2) factory inspection trip(s) for 3 Gilroy Fire, GFD will pay the' o expenses for both trips. customer representative(s). The inspection trip(s) will be scheduled a ime mutually agreed upon between the manufacturer's representative and the customer. All . suc s travel, lodging and meals will be the responsibility of the bidder. BID BOND NOT REQUESTED A bid bond will not be included. If requested, the following will apply: All bidders will provide a bid bond as security for the bid in the form of a 5% and to accompany their bid. This bid bond will be issued by a Surety Company wh ' list on a U.S. Treasury Departments list of acceptable sureties as published in Department ular 570. The bid bond will be issued by an authorized representative of the Surety Comp d wil a accompanied by a certified power of attorney dated on or before the date of bid. The bid b will include language, which assures that the bidder /principal will give a bond or bonds as be specified in the bidding or contract documents, with good and sufficient surety for the fa' h rformance of the contract, including the Basic One (1) Year Limited Warranty, and for th ayment of labor and material furnished in the prosecution of the contract. Notwithstanding any document or asse o contrary, any surety bond related to the sale of a vehicle will apply only to the Basic On 1) ear Limited Warranty for such vehicle. Any surety bond related to the sale of a vehicle wi o p y to any other warranties that are included within this bid (OEM or otherwise) or to the (if any) of any third party of any part, component, attachment or accessory that is incorpor ed i o ttached to the vehicle. In the event of any contradiction or inconsistency betw t r ion and any other document or assertion, this provision will prevail. PERFOR ND 1 YEAR The successful bidde I furnish a .Performance and Payment bond (Bond) equal to 100 percent of the total contra nt within 30 days of the notice of award. Such Bond will be in a form acceptable to the teantied by a surety company included within the Department of Treasury's Listing of Appr ties (Department Circular 570) with a minimum A.M. Best Financial Strength Rating of A and egory of XV. In the event of a bond issued by a surety of a lesser Size Category, a minim ncial Strength rating of A+ is required. Bidder and Bidder's surety agree that the Bond issued hereunder, whether expressly stated or not, also includes the surety's guarantee of the vehicle manufacturer's Basic One (1) Year Limited Warranty period included within this proposal. Owner agrees that the.penal amount of this bond will be simultaneously amended to 25 percent of the total contract amount upon satisfactory acceptance and 5 of 106 delivery of the vehicle(s) included herein. Notwithstanding anything contained within this contract to the contrary, the surety's liability for any warranties of any type will not exceed one (1) year from the date of such satisfactory acceptance and delivery, or the actual Basic One (l) Year Limited Warranty period, whichever is shorter. APPROVAL DRAWING A drawing of the proposed apparatus will be prepared and provided to the purchaser for apps efore construction begins. The Pierce sales representative will also be provided with a copy o the s me drawing. The finalized and approved drawing will become part of the contract docume his drawing will indicate the chassis make and model, location of the lights, siren, horns, comps rents, major components, etc. A "revised" approval drawing of the apparatus will be prepared and sub ' Ze to the purchaser showing any changes made to the approval drawing. T'L",A ITTTAT&- T)T7TT V%XT1►T A "X7 T A T7ATTT T1TTILAM 11T1TT) 1 T/%1r%1 � Tf 1 T A detailed drawing, to scale, of the pump operator's panel will be p 'ded for the purpose of illustrating the standard location(s) of controls and discharges on the p operat 's panel. The drawing will not be meant as an approval, or final construction drawin , rather it 1 be used as an illustration drawing of a standard panel layout. This drawing will include al he gauges and controls located on the pump operator's panel. FINAL DRAWING There will be a revised drawing of the truck i e changes made during production provided at pickup. ELECTRICAL WIRING DIAG Two (2) electrical wiring diagra I re ared for the model of chassis and body, will be provided. QUANTUM CHASSI The Pierce Quantu ' t ustom chassis developed exclusively for the fire service. Chassis provided will be a new, ti cust fire apparatus. The chassis will be manufactured in the apparatus body builder's facility, th minating any split responsibility. The chassis will be designed and manufacture r hea , y -duty service with adequate strength and capacity to sustain the intended load and the type ice required. The chassis will be the manufacturer's first line tilt cab. WHEVSV� The w lbase of the vehicle will be 187.75 ". GVW RATING The gross vehicle weight rating will be 43,500. 6 of 106 FRAME The chassis frame will be built with two (2) steel channels bolted to five (5) cross members or more, depending on other options of the apparatus. The side rails will have a 13.38" tall web over the front and mid sections of the chassis, with a continuous smooth taper to 10.75" over the rear axle. Each rail will have a section modulus of 25.992 cubic inches and a resisting bending moment (rbm) of 3,119,040 in -lb over the critical regions of the frame assembly, with a section modulus of 18.96 cubic ing#es with an rbm of 2,275,200 in -lb over the rear axle. The frame rails will be constructed of 120,000 strength heat- treated 0.38" thick steel with 3.50" wide flanges. FRONT NON DRIVE AXLE The Oshkosh TAK -49 front axle will be of the independent suspension design gound rating of 22,800 lb. " 0i Upper and lower control arms will be used on each side of the axle. Upp r co tr arm castings will be made of 100,000 psi yield strength 8630 steel and the lower control arm c ti ill be made of 55,000 psi yield ductile iron. The center cross members and side plates will be construct Nela:SN 8 00 psi yield strength steel. Each control arm will be mounted to the center secti usimer bus hings. These rubber bushings will rotate on low friction plain bearings an bricated for life. Each bushing will also have a flange end to absorb longitudinal impact to ing noise and vibrations. There will be nine (9) grease fittings supplie , on on each control arm pivot and one (1) on the steering gear extension. The upper control arm will be shorter t t lower arm so that wheel end geometry provides positive camber when deflected below rat to and negative camber above rated load. Camber at load will be 0 de A r imum tire life. The ball joint bea ' a e of low friction design and be maintenance free. Toe links that are a t ble for alignment of the wheel to the center of the chassis will be provided. The wheel ill have little to no bump steer when the chassis encounters a hole or obstacle. The s !Iinage will provide proper steering angles for the inside and outside wheel, based on the vehiel heelbase. The axle will have a third party certified turning angle of 45 degrees. Front discharge, front suction, or aluminum wheels will not infringe on this cramp angle. 7 of 106 FRONT SUSPENSION Front Oshkosh TAK -4T"' independent suspension will be provided with a minimum ground rating of 22,800 lb. The independent suspension system will 'be designed to provide maximum ride comfort. The design will allow the vehicle to travel at highway speeds over improved road surfaces and at moderate speSids over rough terrain with minimal transfer of road shock and vibration to the vehicle's crew compart Each wheel will have torsion bar type spring. In addition, each front wheel end will alsAVYe teny absorbing jounce bumpers to prevent bottoming of the suspension. The suspension design will be such that there is at least 10.00" of total wheel t ve a minimum of 3.75" before suspension bottoms. The torsion bar anchor lock system allows for simple lean adjustments, witho use of shims. One can adjust for a lean within 15 minutes per side. Anchor adjustm nt desi is ch that it allows for ride height adjustment on each side. The independent suspension was put through a durability to t t sim ated 140,000 miles of inner city driving. FRONT SHOCK ABSORBERS KONI heavy -duty telescoping shock absorbers w' ided on the front suspension. FRONT OIL SEALS Oil seals with viewing window will be p the front axle. FRONT TIRES Front tires will be Goodyear 425 50 radials, 20 ply G296 tread, rated for 22,800 lb maximum axle load and 75 mph maxi e The tires will be m e n oa 22.50" x 12.25" polished aluminum disc type wheels with a ten (10)stud, 11.25" t cle. REAR AXLE. The rear axl Rabe MeritorTM, Model RS -24 -160, with a capacity of 24,000 lb. A rearxle ratio will be furnished to allow the vehicle to reach a top speed of 68 mph. REAR SUSPENSION Rear suspension will be a Hendrickson FMX 242 EX, air ride with a ground rating of 24,000 lb. The suspension will have the following features: - Heavy -duty shock absorbers to protect air springs from overextension 8 of 106 - Heavy -duty torque rods and bushings - Premium, heavy -duty rubber bushings require no lubrication - Integrated stabilizer design results in greater stability - Low spring rate air springs for excellent ride quality - Dual height control valves to maintain level vehicle from side to side REAR OIL SEALS OiLseals will be provided on the rear axle. REAR TIRES Rear tires will be four (4) Goodyear 12822.50 radials, 16 ply highway G 6i SA ad, rated for 27,120 lb maximum axle load and 75 mph maximum speed. The tires will be mounted on Alcoa 22.50" x 8.25" polished aluni i disc wheels with a ten (10) stud 11.25" bolt circle. TIRE BALANCE All tires will be balanced with Counteract balancing s. The beads will be inserted into the tire and eliminate the need for wheel weights. TIRE.PRESSURE MANAGEMENT There will be a VECSAFE LED tire alert pr management system provided that will monitor each tire's pressure. A chrome plated brass s Wo be provided on the valve stem of each tire for a total of six (6) tires. 0 The sensor will calibrate to the ti a ure when installed on the valve stem for pressures between 20 and 120 psi. The sensor wil acts to - integral battery operated LED when the pressure of that tire drops 8 psi. Removing the c the ensor will indicate the functionality of the sensor and battery. If the sensor and battery are in wo crg condition, the LED will immediately start blinking. FRONT H VERS Stain eel covers will be provided on the front axle. An oil level viewing window will be pe provi REAR UB COVERS A pair of stainless steel high hat hub covers will be provided on rear axle hubs. WHEEL CHOCKS There will be one (l) pair ofZiamatic AC -44, aluminum alloy wheel blocks provided. 9 of 106 WHEEL CHOCK BRACKETS There will be one (1) pair of Ziamatic QCH -44 -V vertical mounting wheel chock brackets provided for the Ziamatic AC -44 wheel chocks. The brackets will be mounted per direction. ANTI -LOCK BRAKE SYSTEM The vehicle will be equipped with a Meritor WABCO 4S4M, anti -lock braking system. The ABS will provide a 4- channel anti -lock braking control on both the front and rear wheels. A digitally c led system that utilizes microprocessor technology will control the anti -lock braking system Eac wh I will be monitored by the system. When any particular wheel begins to lockup, a signal a seto the control unit. This control unit then will reduce the braking of that wheel for a fraction o econd and then reapply the brake. This anti -lock brake system will eliminate the loc rwheel thus helping to prevent the apparatus from skidding out of control. BRAKES The service brake system will be full air type. The front brakes will be Knorr /Bendix disc type with a 17.00" vents Sd�tor for improved stopping distance. The brake system will be certified, third party inspect - for impr. ved stopping distance. The rear brakes will be Meritorrm, Disc Plus, Model 2 disc operated with automatic slack adjusters and a 17.00" ventilated rotor for impro e s ing distance. AIR COMPRESSOR, BRAKE SYSTEM The air compressor will be a Bendix®, 1' -921, with 15.80 cubic feet per minute output at 1,250 rpm. BRAKE SYSTEM The brake system will inclu • Bendix® a adle valve with vinyl covered foot surface • Heated aut tic m isture ejector on air dryer • Total air syste apacity of 4,362 cubic inches • Two r pressure gauges with a red warning light and an audible alarm, that activates when r presWI3e falls below 60 psi ® - 'set parking brake system e king brake operated by a push -pull style control valve • A parking "brake on" indicator light on instrument panel • Park brake relay /inversion and anti - compounding valve, in conjunction with a double check valve system, with an automatic spring brake application at 40 psi • A pressure protection valve to prevent all air operated accessories from drawing air from the air system when the system pressure drops below 80 psi (550 kPa) 10 of 106 The air tank will be primed and painted to meet a minimum 750 hour salt spray test. To reduce the effects of corrosion, the air tank will be mounted with stainless steel brackets. .BRAKE SYSTEM AIR DRYER The air dryer will be WABCO System Saver 1200 with spin -on coalescing filter cartridge and 100 watt heater. BRAKE LINES Color -coded nylon brake lines will be provided. The lines will be wrapped in a heat prote ' e to in in the chassis areas that are subject to excessive heat. AIR INLET One (1) air inlet with male coupling will be provided. It will allow statio at Z'Oplied to the apparatus brake system through a shoreline hose. The inlet will be located on hriver side seat riser. A check valve will be provided to prevent reverse flow of air. The inlet l d charge into the "wet" tank of the brake system. A mating female coupling will also be p ided with the loose equipment. AIR OUTLET One (1) air outlet will be installed with a female coupli into the "wet" tank of the brake system, include an 8 prevent the brake system from losing all air, and incl tank. The valve and hoses will be mounted to th and protect the lines from being damaged by/bknu ng locate /S pump panel. This system will tie ressure protection valve in the outlet line to e arter turn shut off valve mounted at the igh as possible to ensure maximum clearance rocks during off -road operations. ENGINE IV/ The chassis will be powered by an e i lly controlled engine as described below: Make.- Detr Model: D 13 Power: &dWat 1625 rpm Torque: ,0 lb -ft at 1075 rpm Governed Speed: 2200 rpm Emissions Certificatio EPA 2016 (GHG 17) Fuel: Diesel Cylin Six (6) Displa ent: 781 cubic inches (12.8L) Starter: Delco Remy 39MTTm Fuel Filters: Dual cartridge style with check valve, water separator, and water in fuel sensor II of 106 The engine will include On -board diagnostics (OB.D), which provides self diagnostic and reporting. The system will give the owner or repair technician access to state of health information for various vehicle subsystems. The system will monitor vehicle systems, engine and after treatment. The system will illuminate a malfunction indicator light on the dash console if a problem is detected. REPTO DRIVE A rear engine power take off will be provided to drive the water pump. A vibration dampene be provided between the REPTO and water pump. Transmission PTO's used to drive thew ter p mp ill not be allowed due to their lower torque ratings. The rear engine power take off will be t ame used extensively throughout the construction industry. Rear engine PTO's allow for continuo 240 hp and 480 lb -ft torque ratings needed for large pump applications. The rear engi eke off will have the same warranty as the engine provided by the engine manufacturer. HIGH IDLE A high idle switch will be provided, inside the cab, on the instrument panel t will automatically maintain a preset engine rpm. A switch will be installed, at the c ` str ment panel, for activation /deactivation. The high idle will be operational only when the parking brake i and the truck transmission is in neutral. A green indicator light will be provided, adj X"t the switch. The light will illuminate when the above conditions are met. The light will be label to Engage High Idle." ENGINE BRAKE A Jacobs® engine brake is to be installed w KeWrols located on the instrument panel within easy reach of the driver. The driver will be able to turn the 9ftvbr&e system on/off and have a high, medium and low setting. The engine brake will be inst ClilIVch a manner that when the engine brake is slowing the vehicle the brake lights are activatSd The ABS systenillltor'atically disengage the auxiliary braking device when required. ENlil1VE A1K 11N 1A'1SrL The air inta th ember separator will be mounted on the driver side of the apparatus, with the intake locat on th co toured fiberglass cab front. The intake will be covered with a painted job color panel. Thee " parator is designed to prevent road dirt and recirculating hot air from entering the engine. The ember separator will be easily accessible by tilting the cab. EXHAUST SYSTEM The exhaust system will include a diesel particulate filter (DPF) and a selective catalytic reduction (SCR) device to meet current EPA standards. The exhaust system will be stainless steel from the turbo to the inlet of the SCR device and will be 5.00" in diameter. An insulation wrap will be provided on all 12 of 106 exhaust pipes between the turbo and SCR to minimize the transfer of heat to the cab. The exhaust will terminate horizontally ahead of the passenger side rear wheels. A tailpipe diffuser will be provided to reduce the temperature of the exhaust as it exits. Heat deflector shields will be provided to isolate chassis and body components from the heat of the tailpipe diffuser. RADIATOR The radiator and the complete cooling system will meet or exceed NFPA and engine manufa cooling system standards. f, For maximum cooling performance and corrosion resistance, the entire radiator core will be tructec of long life aluminum alloy. The core will be a serpentine design made of alu fi bed to aluminum tubes. The tubes will be brazed to aluminum headers. Supply and r urn ks will be made of glass- reinforced nylon or aluminum and will be crimped on to the core 0 ng header tabs and a compression gasket to complete the radiator core assembly. The ra iato will be compatible with commercial antifreeze solutions. The radiator will be mounted in parallel with the charge air cooler t void drawing preheated air from the charge cooler through the radiator, thus creating efficie in co n.g performance. The radiator and charge air cooler will be mounted within a steel framework omplete the cooling module.The cooling module will have a minimum total frontal ar 1310 square inches. The cooling module will be mounted in such a manner as to prevent the devel m f leaks caused by twisting or straining when the apparatus operates over uneven ground h ing module will be isolated from the chassis frame rails with rubber isolators. Z The radiator will utilize a remote mration /expansion tank. For visual coolant level inspection, the de- aeration/expanI have a built -in sight glass. The de- aeration /expansion tank will be equipped with a 15 p elief cap. A dra in port will be located Colant o point of the cooling system and /or the bottom of the radiator to permit complete flushin from the system. A fan will be m e dire y to the cooling package and within a molded shroud to minimize the required fan tip clea s and to optimize airflow efficiencies and cooling performance. Shields or baffles will Ovrovided to prevent recirculation of hot air to the inlet side of the radiator. The ill b iven by a serpentine belt drive system mounted directly to the cooling module. The belt d s em will include an input hub, a heavy duty fan clutch, and a 10 rib K- Section Poly V belt with au atic tensioner. The input hub will be driven off the engine crank damper pulley utilizing a Spicer 310 Series driveshaft. COOLANT LINES Gates® silicone hoses will be used for all engine /heater coolant lines installed by the chassis manufacturer. 13 of 106 The chassis manufacturer will also use Gates brand hose on other heater, defroster and auxiliary coolant circuits. There will be some areas in which an appropriate Gates product is not available. In those instances a comparable silicone hose from another manufacturer will be used. Hose clamps will be stainless steel constant torque type to prevent coolant leakage. They will react to temperature changes in the cooling system and expand or contract accordingly while maintainigg a Ar constant clamping pressure on the hose. low) FUEL TANK A 50 gallon fuel tank will be provided and mounted at the rear of the chassis. The tank wil constructed of 12- gauge, hot rolled steel. It will be equipped with swash partiti 61 . To eliminate the effects of corrosion, the fuel tank will be mounted with stainless ps. A .75" drain plug will be located in a low point of the tank for drainage. , A fill inlet will be located on the left hand side of the body and is overe itl hinged, spring loaded, stainless steel door that is marked "Ultra Low Sulfur - Diesel Fu ly ". A .50" diameter vent will be installed from tank top to just a fuel ill inlet. The fuel tank will meet all FHWA 393.67 requireme din a fill capacity of 95 percent of tank volume. All fuel lines will be provided as recommended 62nlfine manufacturer. DIESEL EXHAUST FLUID TANK A 4.5 gallon diesel exhaust fluid (DEF tan be provided and mounted in the driver's side body rearward of the rear axle. A 0.50" drain plug will be p low point of the tank for drainage. A fill inlet will be provi a arked "Diesel Exhaust Fluid Only ". The fill inlet will be located adjacent to the a me je t behind a common hinged, spring loaded, polished stainless steel door on the driver side of t ehicle. The fill inlet will be provided with a locking cap. The tank wi eet th engine manufacturers requirement for 10 percent expansion space in the event of tank frEeZinr,7 The t wi include an integrated heater unit that utilizes engine coolant to thaw the DEF in the event of free The stainless steel flip door for selecting between DEF fill and the diesel fill will be spring loaded to default to covering the DEF fill. FUEL SHUTOFF A shutoff valve will be installed in the fuel line, at the fuel tank. 14 of 106 FUEL COOLER An air to fuel cooler will be installed in the engine fuel return line. TRANSMISSION An Allison 5th generation, model EVS 4000P, electronic, torque converting, automatic transmission will be provided. The transmission will be equipped with prognostics to monitor oil life, filter life, and transmi health. A wrench icon on the shift selector's digital display will indicate when service i %8ock Two (2) PTO openings will be located on left side and top of converter housing (positions and 1 o'clock). A transmission temperature gauge with red light and buzzer will be insta t instrument panel. TRANSMISSION SHIFTER A six (6) -speed push button shift module will be mounted to fight S4ver on console. Shift position indicator will be indirectly lit for after dark operation. The transmission ratio will be: 1 st 3.51 to 1.00 2nd 1.91 to 1.00 3rd 1.43 to 1.00 4th 1.00 to 1.00 5th 0.75 to 1.00 6th 0.64 to 1.00 R 4.80 to 1.00 La�. C %b) TRANSMISSIODMtOORAMMING The. transmissioft a pr grammed to automatically shift the transmission to neutral when the parking brake is set to simpli eration and increase operational safety. A M at and fin transmission oil cooler will be provided using engine coolant to control the trans io oil temperature. TRAN MISSION FLUID The transmission will be provided with TranSynd, or other Allison approved TES -295 heavy duty synthetic transmission fluid. DRIVELINE Drivelines will be a heavy -duty metal tube and be equipped with Spicer® 1810 universal joints. 15 of 106 The shafts will be dynamically balanced before installation. A splined slip joint will be provided in each driveshaft. The slip joint will be coated with Glidecoat® or equivalent. STEERING Dual Sheppard, Model M110, steering gears, with integral heavy -duty power steering, will b ovided. For reduced system temperatures, the power steering will incorporate an air to oil cooler and n, Model VN20, hydraulic pump with integral pressure and flow control. All power steeri ines w' have wire braded lines with crimped fittings. A tilt and telescopic steering column will be provided to improve fit for a broa er of driver configurations. STEERING WHEEL The steering wheel will be 18.00" in diameter, have tilting and tel scopingka ilities, and a 4 -spoke design. MUD FLAPS Heavy -duty black rubber mud flaps will be installed the cab b nd the front wheels. BUMPER A one (1) piece, ten (10) gauge, 304 -2B type pot will be attached to a bolted modular extensio fr mounted directly behind it to provide adequ ess steel bumper, minimum of 10.00" high, zcted of 50,000 psi tensile steel "C" channel strength. The bumper will be extended 16.00" frg Ufce of cab: Documentation will be provided on quest to show that the options selected have been engineered for fit up and approval for th' u bumper extension. A chart will be provided to indicate the option locations and will i0c ut of be limited to the following options: air horns, mechanical sirens, speakers, a i h hose capacities, winches, lights, discharge, and suction connections. GRAVEL PAN A gravel pan onstrue ed of bright aluminum treadplate, will be furnished between the bumper and cab fate. The gAWI an will be properly supported from the underside to prevent flexing and vibration of the a eadnlate. A hose fray, constructed of aluminum, will be placed in the center of the bumper extension. The tray will have a capacity of 100' of 1.75" double jacket cotton- polyester hose. Black rubber grating will be provided at the bottom of the tray. Drain holes are also provided. 16 of 106 HOSE TRAY COVER A bright aluminum treadplate cover will be provided over the center hose tray. The cover will be raised 1.50" above the gravel pan. The cover will be attached with a stainless steel hinge. A lift and turn latch will secure the cover in the closed position and a pneumatic stay arm wil e cover in the open position. TOW HOOKS Two (2) chromed steel tow hooks will be installed under the bumper and attached to the ont tame members. The tow hooks will be designed and positioned to allow up to a 6,0 ght horizontal pull in line with the centerline of the vehicle. The tow hooks will not be u ifti of the apparatus. ADJUSTABLE HOSE TRAY PARTITION There will be one (1) adjustable aluminum partition(s) provided 'n bumper hose tray located side to side in the front tray, exact location will be provided. CAB The cab will be designed specifically for the fire servi d manufactured by the chassis builder. The cab will be built by the apparatus manu For reasons of structural integrity and en] design, constructed to the following mini located on the manufacturer's premises. protection, the cab will be of heavy duty The cab will have 13 main vertical Ymembers located in the A- pillar (front cab corner posts), 13- pillar (side center posts), C- pillar ar rner posts) and rear wall areas. The A- pillar will be constructed of 0.25" heavy w s joined by a solid A356 -T6 aluminum joint casting. The B- pillarand C- pillar will al b tructed from 0.25" heavy wall extrusions. The rear wall will be constructed of tw ' x 2.00" outer aluminum extrusions and three (3) 1.50" x 1.50" inner aluminum extrus1 All ain vertical structural members will run from the floor to 3.375" x 3.10" x 0.125" thick roof ext ons to provide a cage -like structure with the A- pillar and roof extrusions being welded at a the ont corners of the roof assembly. The th cab will be constructed of a 0.090" thick firewall, covered with a 0.1.25" front skin (for a total t ' e s of 0.134 "), and reinforced with a 95.00" wide x 17.00" deep x 0.1875" thick cross -cab support ocated just below the windshield. The 4.00" x2.00" x 0.130" cross -cab windshield support tube will run the full width of the cab and weld to each A- pillar and the 0.1875" thick windshield support panel. The cab floors will be constructed of 0.125" thick aluminum plate and reinforced at the firewall with an additional 0.25" thick cross -floor support providing a total thickness of 0.375" of structural material at 17 of 106 the front floor area. The front floor area will also be supported with 4.00" x 3.00" x 0.75" thick tubing that also provides the mounting point for the cab lift pivot. This. tubing mounts atop a pair of perpendicular 4.25" x 3.00" x 0.375" tubes that will run from the front of the cab to the 0.1875" thick engine tunnel, creating the structure to support the forces created when lifting the cab. Cab will be approximately 96.00" wide, with an overall height (from the cab roof to the groubeh d f approximately 109.50 ". The overall height listed will be calculated based on a truck configu ith the lowest suspension weight ratings, the smallest diameter tires for the suspension, no ter no loose equipment weight and no personnel weight. Larger tires, wheels and suspension w1 the overal l height listed. The driver will have a flat floor area measuring a minimum of 24.50" wide (do to me, tunnel) and 28.00" long (front to seat riser). The officer will have a flat floor area me 'n imum of 23.00" wide and 21.50" long. A The dimension from the back edge of the steering column to the 'ver's at Zack (seat in rearmost position) will be a minimum of 30.00 ". The crew cab floor will measure 43.25" from rear wall to rear Wng seat ledge. The back side of the engine tunnel will measure 59.50 the rear wall. Crew cab will be of the totally enclosed design, doors constructed in the same manner as the front cab doors. Cab and crew cab will be designed to o r m and allow complete visual and audio communications between all fire fighte . Cab will be a full tilt design, allo g e sy maintenance of the engine compartment. The engine will be accessible when the cab is ti I also be removable when the cab is tilted. Provisions for chec ' eng a and transmission oil will be provided on the engine tunnel and must be accessible wit t tin a cab. Cab will be isolated the chassis inputs by four (4) rubber load cushions. A co toure o : ed fiberglass housing will be installed on the front of the cab. The housing will be paint the cab. A contoured aluminum grille, headlight bezel and wrap around band three (3) separate bright finished sections will be installed on the front of the housing. A logo will be affixed permanently to the grille housing. A contoured molded fiberglass "eyebrow" trim assembly will be installed at the front roof line above the windshield. The eyebrow will be painted to match the cab roof. The marker lights will be recessed into the eyebrow. 18 of 106 CAB PUMP ENCLOSURE The rear of the cab will be made to house the fire pump below the forward facing crew cab seats. The cab side panels will be notched to accommodate the pump panel. ENGINE TUNNEL The engine tunnel will be constructed out of. 188" aluminum and will be tapered at the top to a ow for more driver and passenger elbow room. 'O'R The engine tunnel inside the cab will not exceed 20.00" from the cab floor to the top of ngin tunnel. The width of the engine tunnel inside the cab will not exceed 36.00" on the top ap urface and 43.00" at the floor area. The engine tunnel will also taper and narrow towards the rear as it extends in t crew cab area. The width of the engine tunnel on the top tapered surface at the rear will not e e 0.50 ", therefore providing optimum room for the fire fighters seated in the crew a ar acing seats. The engine hood will be insulated for protection from heat n ound. he noise insulation keeps the dBA level within the limits stated in the current NFP series 19 amphlet. FENDER LINERS Circular inner fender liners in the wheel wells wi ded. WINDSHIELD A large curved, safety glass windshield r e over 4,100 square inches of clear viewing area for enhanced visibility. The cab windshield will be instal uti zing modern automotive techniques, which include bonding to the cab sheet metal with a ur a e ive, and then trimmed in rubber. Economical winds ' p lace ent glass will be readily available. WINDSHIELD RS Electric windshield w, rs will be provided that meet FMVSS and SAE requirements. One (1) control will operate 61 ipers. The wiper control will be two (2) speed (high and low) and feature an inte nt cod ol. The control will also have a "return to park" provision (toward center of cab). The wipe e a pantographic design for covering a large sweeping area. Each w er will be equipped with a washer that is actuated by the wiper control. Wash reservoir will be able to be filled without raising the cab. 19 of 106 CAB REAR WALL EXTERIOR COVERING The exterior surface of the rear wall of the cab will be overlaid with bright aluminum treadplate except for areas that are not typically visible when the cab is lowered. CAB LIFT A hydraulic cab lift system will be provided consisting of an electric powered hydraulic pump, dual lift cylinders, and necessary hoses and valves. The hydraulic pump will have a manual override for backup in the event of electrical fa' r Lift controls will be located behind an access door on the passenger side, behind the bu er. The cab will be capable of tilting 41.5 degrees to accommodate engine mainted ce d removal. Cab will be locked down by a two (2) -point automatic spring - loaded hoo me hanism that actuates after the cab has been lowered. The hydraulic cylinders will be equipped with a velocity fuse that p ects the cab from accidentally descending when the control is located in the tilt position. A redundant mechanical stay arm will automatically engaged ce the cab has been fully raised. Before lowering the cab, this device must be disenga ing the stay arm control located near the cab raise /lower switch. Cab Lift Interlock The cab lift system will be interlocked to th fisitch ng brake. The cab tilt mechanism will be active only when the parking brake is set and the i iti is in the on position. If the parking brake is released, the cab tilt mechanism Rd led. DOOR JAMB SCUFELLALW All cab doorjambs will b isa polished stainless steel scuffplate, mounted on the striker side of the jamb. Both rear cab comer0"I be furnished with a stainless steel corner guard scuffplate. The scuffplates will run fro below the cab roof radius down to the molding above the lower skirt. The guard will exte 00" ft the corner to protect paint damage when pulling booster hose. MIRK RS Velvack, Model 2025, low mount chrome mirrors will be mounted, one (1) on each of the cab doors. The mirror will include a replaceable 62 square, inch flat glass and a 30 square inch convex glass. Overall mirror dimensions will be 8.50" wide x 13.75" high. Mirror head will have a highly polished chrome finish. 20 of 106 Both flat mirror heads will be adjustable by an electric remote control switch inside the cab within easy reach of the driver. Convex mirror heads will be adjusted manually. The mirror heads will also be heated with the control within easy reach of the driver. The mirror arms and heads will be reversed side to side to reduce amount mirrors extend from side of cab. The Velvac two (2) -year warranty on material and workmanship and two (2) -year warranty o�n Dhrme finish will be provided. CAB DOORS Cab and crew cab doors will be approximately 32.00" wide x 6 LOW high. Crew cab doors will be located on the side of the cab. Cab and crew cab doors will be equipped with automotive type r ber, coiftintrous perimeter bulb seal on the door opening to ensure a weather tight fit. Cab doors will be constructed of aluminum with a double pan aWign. T The upper area of each door will be contoured into the f and include a contoured tinted window feature that provides better visibility on the interior a to exterior of the cab.. Flush mounted, chrome plated paddle type do r nd s will be provided on the interior and exterior cab and crew cab doors. The cab doors will be provided with in rior oc s as required by FMVSS 206. The front and rear cab doors will have a manual lock con ' ir . tary lock knob) built into the interior door latch. Each door will have a keyed exterior lock m built into the door handle assembly The door hinges will be stri s eel iano type with a.25" pin. DOOR PANE The inner cab door els will be constructed out of brushed stainless steel. The panels will extend from the bottom ofth door to 12.00" above the floor line. ELE,QTRIC_QRERATED CAB DOOR WINDOWS All fo r b doors will be equipped with electric operated windows with flush mounted automotive styles 'tches. The driver's side lower instrument panel will also have three (3) controls, officer's door window and both crew cab door windows. 21 of 106 CAB STEPS, POWER Cab entrance steps will be enclosed and automatically drop down when the door is opened and rise up when the door is closed. Both cab step assemblies will be of simplistic and identical design. The steps will be operated by a switch (air spool valve) on the cab doorframe, which is connected to an air cylinder, that activates both the up and down operation of the steps. A dedicated air supply tank will be furnished for the step air system, to assure an adequate air for the up and down activation. To reduce the effects ofcorrosion, the air tank will be mou d with o stainless steel brackets. Each step, when in the stored position, will be totally enclosed to protect the m ch s from road debris and moisture. Each step assembly will be designed in a three (3) -step arrangement, with eac s p spaced no more than 1.6.00" apart, providing easy cab entry and egress. Each step surface will be a minimum of 160 square inches. The step surface will be constructed out of a non -slip material t ill also be self - draining. A slip- resistant handrail will be provided adjacent to ab door opening to assist during cab ingress and egress. AUXILIARY AIR COMPRESSOR An auxiliary air compressor will be fumishe pply air for the cab step system. The air compressor will be a 12 -volt DC and wired directly o t b tteries. The compressor will have a rating of .5 CFM at 100 psi. The compressor will insur omatic step operation at all times. FENDER CROWNS Stainless steel fender crow ill e i ailed at the cab wheel openings. The fender crowns will have a radius outside corn a ill a ow the fender crown to extend out further than the standard width crown, thus exte ' eyo the sidewal I of the front tires and allow the crew cab doors to open fully. On each sid e crew cab, a window with tinted glass will be provided. A contoured window, with tinte ss VIso be provided above the side crew cab window and match the contoured windows in the ca MOU ING PLATE ON ENGINE TUNNEL Equipment installation provisions will be installed on the engine tunnel. A .25" aluminum plate will be installed on the horizontal surface of the engine tunnel. The plate will be spaced off the engine tunnel .50 ". The plate will extend the entire length of the engine tunnel. The 22 of 106 mounting plate will not cover the engine fluid access cover. The mounting surface will be painted to match the cab interior. CAB INTERIOR The cab instrument panel.will be padded and covered with Imperial 1200 vinyl coated polyester. The door panels will be covered with a high impact ABS plastic. The cab dash fascias will be a wrap- around design to provide easy access of controls an ill be constructed out of high impact ABS plastic. The headliner will be installed in both forward and rear cab sections. Headline r* ill be Imperial 1200 vinyl coated polyester. Material will be installed on aluminum t securely fastened to interior cab ceiling. Forward portion of cab headliner will provide easy access for servicing ele tri V wiring or for other maintenance needs without removing the entire unit. CAB INTERIOR UPHOLSTERY The cab interior upholstery will be gray woven with black. CAB INTERIOR PAINT A rich looking interior will be provided by paint in a he etal surfaces inside the cab gray, vinyl texture paint. l CAB FLOOR The cab and crew cab flooring will be ve ith heavy -duty rubber matting. CAB HEATER There will be a 40,000 BTU a cab located below the right side cab dash. The heater /defroster ventilation will be built in e d ig f the cab dash instrument panel. The heater ducts will be vented . in a manner to pro dir ed towards the officer and the driver. The defroster ducts will be designed to ;ONING im defrosting capabilities for the windshield. Adjustable defroster louvers will be proor ' e tin airflow to the side cab door windows. Heater /defr ontrols will be located on the cab dash within easy reach of the driver. AIR A high erformance, customized air conditioning system will be furnished inside the cab and crew cab. A 19.1 cubic inch compressor will be installed on the engine. The air conditioning systems will be capable of cooling the average cab temperature from 100 degrees Fahrenheit to 73 degrees Fahrenheit within 30 minutes at 50 percent relative humidity. The cooling performance test will be run only after the cab has been heat soaked at 100 degrees Fahrenheit for a minimum of 4 hours. 23 of 106 A roof mounted condenser with a BTU rating sufficient to meet and exceed the performance specification, will be installed on the cab roof. Mounting the condenser below the cab or body would reduce the performance of the system and will not be acceptable. Two (2) evaporator units will be installed in the cab, one (1) in the cab dash, just to the front of the officer, and one (1) in the crew cab, mounted to the ceiling. The evaporator units will have an dequate BTU rating to meet the performance specifications. Adjustable air outlets will be strategically located on the evaporator cover per the folio • Two (2) will be in the drivers side dash • Two (2) will be in the officers side dash • Four (4) will be directed towards the crew cab area The air conditioner refrigerant will be R -134A, installed by a certified technic The air conditioner will be controlled by a.single electronic cont ane . For ease of operation, the control panel will include variable adjustment for temperat a and fa ntrol and be conveniently located on the dash in clear view of the driver. The control p will include robust levers for both fan speed and temperature adjustment. INTERIOR CAB INSULATION The cab and crew cab walls will be insulated wit sulation to reduce heat transfer into the cab. The insulation will be covered with a vinyl n metal panel painted to match the interior. SUN_ VISORS Two (2) smoked LexanTM sun viilat d. The sun visors will be located above the windshield with one (1) mounted on each side of There will be a black plase num provide d to help secure each sun visor in the stowed position. GRAB HAND A black rubber cov d rab handle will be mounted on the door post of the driver and officer's side cab door to assist jp enteri g the cab. The grab handle will be securely mounted to the post area between the The v b handle will be 3.00" higher than the officer's grab handle, to allow additional clearance betwee the steering wheel and grab handle. ENGINE COMPARTMENT LIGHTS There will be two (2) Truck -Lite Model 44308C 4.00" white LED light(s) with Model 40700 grommet(s) installed under the engine hood for use as engine compartment illumination. 24 of 106 These light(s) will be activated automatically when the cab is raised and deactivated when the cab is lowered. MAP BOX There will be one (1) map box(es) with three (3) bins, open at top. The map box(es) will be installed at final inspection. The map box(es) will be divided into three (3) bins, each being 12.50" wide x,3.00" high x 12.00" deep. Each bin will slant 30 degrees from horizontal. The map box(es) will b constructed of 0.125" aluminum and will be painted to match the cab interior. VELCRO STRAPS) FOR MAP BOX There will be one (1) Velcro® strap(s) installed on the map box. FRONTAL IMPACT PROTECTION The cab will be provided with a frontal impact protection system and wil inc idet following: • A supplemental restraint system (SRS) sensor will be inst led on tr VCtural cab member behind the instrument panel. The SRS sensor will perfo 1 time diagnostics of all critical subsystems and will record sensory inputs immediat before d during a frontal impact event. • A fault - indicating light will be provided on the vehicle strument panel allowing the driver to monitor the operational status of the SRS syst • A driver side front air bag will be mounted in a ring wheel and will be designed to protect the head and upper torso of the occupant, in combination with the three (3) -point seat belt. • A passenger side knee bolster air ba a mounted in the modesty panel below the dash panel and will be designed to protect the occupant, when used in combination with the three (3) -point seat belt. • Driver and front passenge us nsion seats will be provided with devices to retract them to the lowest travel position rontal impact event. o Driver and front p s er ea elts will be provided with pre- tensioners to remove slack from the seat belpftiff&kontal impact event. The SRS system w Mehe vide protection during a frontal or oblique impact event. The system will activate when a v decelerates at a predetermined G force known to cause injury to the occupants. The cab and is will have been subjected, via third party test facility, to a crash impact during front ob ' e impact testing. Testing included all major chassis and cab components such as moun s ps for fuel and air tanks, suspension mounts, front suspension components, rear suspen ' ns components, frame rail cross members, engine and transmission and their mounts, pump house and mounts, frame extensions and body mounts. The testing provided configuration specific information used to optimize the timing for firing the safety restraint system. The sensor will activate the pyrotechnic devices when the correct crash algorithm, wave form, is detected. The SRS system will deploy the following components in the event of a frontal or oblique impact event: 25 of 106 • Driver side front air bag. • Passenger side knee bolster air bag. • Driver and front passenger suspension seats will be retracted to the lowest travel position. • Driver and front passenger seat belts will be pre- tensioned to firmly hold the occupant in place. SEATING CAPACITY The seating capacity in the cab will be six (6). DRIVER SEAT e� A Pierce PS60 seat will be provided in the cab for the driver. The seat design will be a cam 'on type, with air suspension. For increased convenience, the seat will include manual c zffll* djust the height (1.12" travel) and horizontal (6.00" travel) position. The manual horizo trot will be _a. towel -bar style located below the forward part of the seat cushion. To pr nOd ty for multiple driver configurations, the seat will have a reclining back adjustable from r s back to 45 degrees forward. The seat back will be a high back style, and will include minim " deep side bolster pads for maximum support.. For optimal comfort, the seat will be pro Ai wi17.00" deep foam cushions. The seat will include the following features incorporated in o frontimpact protection system: • A suspension seat safety system will be inclu When ctivated in the event of a frontal impact, this system will pretension the seat be a When the seat to its lowest travel position. low V4W The seat will be furnished with a 3- point, should y seat belt. To provide quick, easy use for occupants wearing bunker gear, the seat bel a minimum 120.00" shoulder length and 55.00" .lap length. The seat belt tongue will be aist position for quick application by the seat occupant. The seat belt receptacle will a pr vided on a cable conveniently nested next to the seat cushion, providing easy accessibi C eat belt will be furnished with dual automatic retractors that will provide ease of operation al seating position. OFFICER SEAT r A Pierce, PS68, a rovided in the cab for the passenger. The seat will be a cam action type, with air suspen io or in reased convenience, the seat will include a manual control to adjust the horizontal position (. 'travel). The manual horizontal control will be a towel -bar style located below the forward of the seat cushion. To provide flexibility for multiple passenger configurations, the seat ll have r clining back adjustable from 20 degrees back to 0 degrees forward. The seat back will be a h style with manual lumbar adjustment lever, and will include minimum 7.50" deep side bolster ads for maximum support. For optimal comfort, the seat will be provided with 17.00" deep dual de sity foam cushions designed with EVC (elastomeric vibration control). To ensure safe operation, the seat will be equipped with seat belt sensors in the seat cushion and belt receptacle that will activate an alarm indicating a seat is occupied but not buckled. The seat will include the following feature incorporated into the frontal impact protection system: 26 of 106 o A suspension seat safety system will be included. When activated, this system will pretension the seat belt and retract the seat to its lowest travel position. The seat will be furnished with a 3- point, shoulder type seat belt. To provide quick, easy use for occupants wearing bunker gear, the seat belt will have a minimum 120.00" shoulder length and 55.00" lap length. The seat belt tongue will be stored at waist position for quick application by the se occupant. The seat belt receptacle will be provided on a cable conveniently nested next to t s cushion, providing easy accessibility. The seat belt will be furnished with dual automat i retr ctors hat will provide ease of operation in the normal seating position. FORWARD FACING DRIVER SIDE OUTBOARD SEAT 04, ' There will be one (1) forward facing, Pierce PS68 foldup seat provided at the ive We outboard position in the crew cab. The seat back will be a high back style. To pro 'm ride comfort, and maximize accessibility to the crew cab, the seat will be a minimuim o I5. O'Srom the front of the cushion to the face of the seat back and the seat back will be provided wit cree fixed recline angle. To ensure safe operation, the seat will be equipped with seat belt ors in the seat cushion and belt receptacle, that will activate an alarm indicating a seat is oc ied bb u t buckled. The seat will be furnished with a three (3)- point, shoulder type belt. To provide quick, easy use for occupants wearing bunker gear, the seat belt will ha a inimum 120.00" shoulder length and 55.00" lap length. The seat belt tongue will be stored at wai po ' n for quick application by the seat occupant. The seat belt receptacle will be provi ble conveniently nested next to the seat cushion, providing easy accessibility. The se b 1 be furnished with dual automatic retractors that will provide ease of operation in the normal g position. There will be two (2) forward fac' rce PS6 seats provided at the center position in the crew cab. The seat backs will b SCBA back style. The SCBA cavity will be adjustable from front to rear in 1.00" incre a to accommodate different sized SCBA cylinders. Moving the SCBA cavity will be acco she nbolting, relocating, and re- bolting it in the desired location. To provide improved ride co aximize accessibility to the crew cab, the seats will be provided with 15.00" deep m c shy s, and the seat backs will be provided with 0 degree fixed recline angle. Toe fe ration, the seats will be equipped with seat belt sensors in the seat cushion and bel a cle at will activate an The se s will be furnished with three (3)- point, shoulder type seat belts. To provide quick, easy use for occupadYs wearing bunker gear, the seat belts will have a minimum 130.00" shoulder length and 55.00" lap length. The seat belt tongue will be stored at waist position for quick application by the seat occupant. The seat belt receptacle will be provided on a cable conveniently nested next to the seat cushion, providing easy accessibility. The seat belts will be furnished with dual automatic retractors that will provide ease of operation in the normal seating position. 27 of 106 alarm indicating a seat is occupied but not buckled. The se s will be furnished with three (3)- point, shoulder type seat belts. To provide quick, easy use for occupadYs wearing bunker gear, the seat belts will have a minimum 130.00" shoulder length and 55.00" lap length. The seat belt tongue will be stored at waist position for quick application by the seat occupant. The seat belt receptacle will be provided on a cable conveniently nested next to the seat cushion, providing easy accessibility. The seat belts will be furnished with dual automatic retractors that will provide ease of operation in the normal seating position. 27 of 106 FORWARD FACING PASSENGER SIDE OUTBOARD SEAT There will be one (1) forward facing, foldup, Pierce PS69 seat provided at the passenger side outboard position in the crew cab. The seat back will be a high back style. To provide improved ride comfort, and maximize accessibility to the crew cab, the seat will be a minimum of 15.00 from the front of the cushion to the face of the seat back and the seat back will be provided with 0 degree fixed recline angle. To ensure safe operation, the seat will be equipped with seat belt sensors in the seat cushion a belt receptacle, that will activate an alarm indicating a seat is occupied but not buckled. I The seat will be furnished with a three (3)- point, shoulder type seat belt. To provide qu c asy rW for occupants wearing bunker gear, the seat belt will have a minimum 120.00" shoulder length a 5.00" lap length. The seat belt tongue will be stored at waist position for quick appli be seat occupant. The seat belt receptacle will be provided on a cable conveniently ne d n t to the seat cushion, providing easy accessibility. The seat belt will be furnished wit u a tic retractors that will provide ease of operation in the normal seating position. SEAT UPHOLSTERY All seat upholstery will be black Imperial 1200 material. AIR BOTTLE HOLDERS All SCBA type seats in the cab will have a "Hands -1 efficiency and convenience, the bracket will include to store the SCBA bottle by simply pushing it int cab, in the event of an accident, the inertial c , in the seat and will exceed the NFPA standa C straps, buckles) that could be inadverte No cab during an accident, will not be MSE There will be a quantity of two '�A brackets. SEAT BELTS ' All seating positi s th and crew cab will have red seat belts. The belts will also i e the Ready Reach® D -loop assembly to the shoulder belt system. The Ready Reach featur dds an extender arm to the D -loop location placing the D -loop in a closer, easier to reach location. SHO HARNESS HEIGHT ADJUSTMENT " auto clamp style bracket in its backrest. For i a atic spring clamp that allows the occupant ack. For protection of all occupants in the !s within the clamp will constrain the SCBA bottle Bracket designs with manual restraints (belts,. td and allow the SCBA to move freely within the All seag positions furnished with 3 -point shoulder type seat belts will include a height adjustment. This adjustment will optimize the belts effectiveness and comfort for the seated firefighter. 28 of 106 SEAT BELT MONITORING ON COMMAND ZONE COLOR DISPLAY A seat belt monitoring screen will be provided on the Command Zone, color display. The system will be capable of monitoring up to ten (10) seating positions in the cab with green and red seating icons illuminated as follows: • Seat Occupied & Buckled = Green • Seat Occupied & Unbuckled = Red • No Occupant & Buckled = Red • No Occupant & Unbuckled = Not Illuminated The seat belt monitoring screen will become active on the Command Zone, col lwhen: e The park brake is released: • and there is any occupant seated but not buckled or any be t bu kl d without an occupant: • and there are no other Do Not Move Truck conditions present. soon as all Do Not . Move Truck conditions are cleared, the seat belt tori screen will be deactivated. The seat belt monitoring screen will be manually selected a me the -ommand Zone, color display is powered. . AUDIBLE ALARM The seat belt monitoring screen will be accompani a udible alarm that will activate when a red seat icon condition exists and the parking brake HELMET HOLDER There will be four (4) On Scene Talon, 0 510, helmet holder bracket(s) provided in the cab. Each bracket will provide quick ac9 cure storage of the helmet. The bracket location(s) will bye ' ed at time of final inspection. CAB DOME LIGHTS j There will be fo i R e ua D dome lights with black bezels provided. Two (2) lights will be mounted above the inside s r o the driver and officer and two (2) lights will be installed and located, one (1) on each side oew cab. The color olWe ED's will be red and white. Thew e L 's will be controlled by the lens switch. The col r LED's will be controlled by the door switches and the lens switch. In order to ensure exceptional illumination, each white LED dome light will provide a minimum of 10.1 foot - candles (fc) covering an entire 20.00" x 20.00" square seating position when mounted 40.00 above the seat. 29 of 106 OVERHEAD MAP LIGHTS There will be two (2) Peterson, Model M371 S, rectangular LED adjustable map lights installed in the cab: • One (1) overhead in front of the driving position. • One (1) overhead in front of the passenger's position. Each light will include a switch on the light housing. The light switches will be connected directly to the battery switched power. se MAP LIGHT There will be one (1) Sunnex ®, LS75* Series, LED map light(s) provided in d located officer side per direction. Each map light will have a rectangular base with an o o The map light(s) will have a 20.00" long flexible neck that exits the top of the chassis mount. The light switch(es) will be connected directly to the battery swit d p er. MAP LIGHT There will be one (1) Sunnex ®, HS76 * -00, halogen map lights -th swivel joint base provided in the cab and located officer side inner shoulder. Each m ' ht will have a square base with an switch. The light(s) will also be provided with a red len The light switch(es) will be connected direc o he battery switched power. CAB SPOTLIGHT There will be two (2) Golight/Ra ' Ra ; Model 20 * *4, black .LED spotlights located on the cab roof, each end of the lightbar. The/spqgi will be mounted on painted Z brackets. These lights may be (;�MaAW when the parking brake is applied. There will be one (1 )'Vred dash mounted remote provided for each spotlight. The t toYontrol the spotlights will be located one (1) within reach of the driver and one (1) within reach he fficer. NFPA 1901, 2009 edition, section 5.8.3 requires two portable hand lights mounted in brackets fastened to the apparatus. The hand lights are not on the apparatus as manufactured. The fire department will provide and mount these hand lights. 30 of 106 CAB INSTRUMENTATION The cab instrument panel will include gauges, telltale indicator lamps, an LCD display, control switches, alarms, and a diagnostic panel. The function of the instrument panel controls and switches will be identified by a label adjacent to each item. Actuation of the headlight switch will illuminate the labels in low light conditions. Telltale indicator lamps will not be illuminated unless necessary. The cab instruments and controls will be conveniently. located within the forward cab section, forward the driver. The gauge assembly and switch panels are designed to be removable for ease of servi low cost of ownership. GAUGES The gauge panel will include the following ten (10) ivory faced gauges with bl Ala to monitor vehicle performance: Voltmeter gauge (volts): Low volts (11.8 VDC) Amber caution indicator on the information center w interm nt alarm Amber check gauge light on indicator light di lay High volts (15 VDC) Amber caution indicator on the informati ce ter with intermittent alarm Amber check gauge light on indicato display Very low volts (11.3 VDC) Red warning indicator on in rmation center with a steady alarm Amber check gau 1 t in icator light display Very high volts V C) '0 Red warning i cator on the information center with a steady tone alarm Amb ck gauge light on indicator light display Engin c meter (RPM) Speedo eter MPH Fuel level gauge (Empty - Full in fractions): Low fuel (1/8 full) 31 of 106 Amber caution indicator on the information center with intermittent alarm Amber check gauge light on indicator light display Very low fuel (1/32 full) Red warning indicator on the information center with steady tone alarm Amber check gauge light on indicator light display Engine Oil pressure Gauge (PSI): Low oil pressure to activate engine warning lights and alarms Red caution indicator on the information center with steady alarm Amber check gauge light on indicator light display no� Front Air Pressure Gauges (PSI): Low air pressure to activate warning lights and alarm Red warning indicator on the information cen ith steady alarm Amber check gauge light on indicator ligh Rear Air Pressure Gauges (PSI): Low air pressure to activate war 'g)fs and alarm Red warning indicator on ation center with steady alarm Amber check gauge I' ator light display pgg Transmission Oil T .,� ire auge (Fahrenheit): High trans ion oil temperature activates warning lights and alarm indicator on the information center with intermittent alarm gauge light on indicator light display Temperature Gauge (Fahrenheit) High engine temperature activates an engine warning light and alarms Amber caution indicator on the information center with intermittent alarm Amber check gauge light on indicator light display 32 of 106 Diesel Exhaust Fluid Level Gauge (Empty - Full in fractions): Low fluid (1/8 full) Amber telltale light on indicator light display INDICATOR.LAMPS To promote safety, the following telltale indicator lamps will be located on the instrument pa ]ear view of the driver. The indicator lamps will be "dead- front" design that is only visible en active. The colored indicator lights will have descriptive text or symbols. The following amber telltale lamps will be present: Low coolant Traccntl (traction control) (where applicable) Check engine Check trans (check transmission) Air rest (air restriction) Check. Gauges DPF (engine diesel particulate filter regener Air inlet heater (wait to start) (where apyslib HET (engine high exhaust tempelire applicable) ABS (antilock brake system) MIL (engine emissis ton ind icator lamp) (where applicable) Regen inhibit (dnkiternissfons regeneration inhibit) (where applicable) Trans temp (nsmissibn temperature) SRS lem thl restraint system) fault (where applicable) DEF ( w diesel exhaust fluid level) The following red telltale lamps will be present: Seat belt Parking brake 33 of 106 Stop engine The following green telltale lamps will be present: Left turn Right turn Battery on The following blue telltale lamps will be present: High beam ALARMS Audible steady tone warning alarm: A steady audible tone alarm will be rov a whenever a warning message is present. Audible pulsing tone caution alarm: A pulsing audible tone alarm ( e /chirp) will be provided whenever a caution message is present without a warning e e bei g present. Any active audible alarm will be able to be silenced olding t e ignition switch at the top position for three (3) to five (5) seconds. For improved safety, sil nc udible alarms will intermittently chirp every 30 seconds until the alarm condition no lon . The intermittent chirp will act as a reminder to the operator that a caution or warning cond -ti sti exists. Any new warning or caution condition will enable the steady or pulsing tones resp INDICATOR LAMP AND ALARM R -OUT A system will be provided which ly tests telltale indicator lights and alarms located on the cab instrument panel. Telltale in to and alarms will perform prove -out at initial power -up to ensure proper performance. 0 CONTROL SWITM For ease of use, Nref wi g controls will be provided immediately adjacent to the cab instrument panel within eas the driver. All switches will have backlit labels for low light applications. Headlight/P' switch: A three (3)- position maintained rocker switch will be provided. The first o ' on will deactivate all parking and headlights. The second switch position will activate the p g ghts. The third switch will activate the headlights. Panel b cklighting intensity control switch: A three (3)- position momentary rocker switch will be provided. The first switch position decreases the panel backlighting intensity to a minimum level as the switch is held. The second switch position is the default position that does not affect the backlighting intensity. The third switch position increases the panel backlighting to a maximum level as the switch is held. 34 of 106 Ignition switch: A three (3)- position maintained /momentary rocker switch will be provided. The first switch position will deactivate vehicle ignition. The second switch position will activate vehicle ignition. The third momentary position will disable the Command Zone audible alarm if held for three (3) to five (5) seconds. Engine start switch: A two (2)- position momentary rocker switch will be provided. The first itch position is the default switch position. The second switch position will activate the vehicle's Ira. e. The switch actuator is designed to prevent accidental activation. Hazard switch will be incorporated into the steering column. *Ise Heater and defroster controls. Turn signal arm: A self - canceling turn signal with high beam headlight n d wiper /washer controls will be provided. The windshield wiper control will have high, low, ntermittent modes. Parking brake control: An air actuated push /pull park brake con Chassis horn control: Activation of the chassis horn contro 'll be pr ided through the center of the steering wheel. CUSTOM SWITCH PANELS The design of cab instrumentation will allow for e Aetytre lighting and other switches to be placed within easy reach of the operator thus improvin will be positions for up to three (3) switch panels in the overhead console 0 th ide, up to four (4) switch panels in the engine tunnel console facing the driver, and up r )switch panels in the overhead console on the officer's side. All switches have backli abe for low light applications. High idle engagement switch: m tary membrane switch with integral indicator lamp will be provided. The switch will a a r deactivate the high idle function when pressed and released.; The "Ok To Engage High Idl ' ' ' r 1 p must be active for the high idle function to engage. A green indicator lamp int o igh idle engagement switch will indicate when the high idle function is engaged. "Ok To Eng High tale" indicator lamp: A green indicator light will be provided next to the high idle activation svftw o indicate that the interlocks have been met to allow high idle engagement. Diese ate filter regeneration switch (where applicable). Diesel rticulate filter regeneration inhibit switch (where applicable). DIAGNOSTIC PANEL A diagnostic panel will be accessible while standing on the ground and will be located inside the driver's side door left of the steering column. The diagnostic panel will allow diagnostic tools such as computers to connect to various vehicle systems for improved troubleshooting providing a lower cost of ownership. 35 of 106 Diagnostic switches will allow engine and ABS systems to provide blink codes should a problem exist. The diagnostic panel will include the following: Engine diagnostic port Transmission diagnostic port ABS diagnostic port SRS diagnostic port (where applicable) Command Zone USB diagnostic port Engine diagnostic switch (blink codes flashed on check engine telltale indi o ABS diagnostic switch (blink codes flashed on ABS telltale indicator) CAB LCD DISPLAY A display will be mounted in the driver side of the cab within easy r h of the driver. Rack down will be shown on the display (no telltale indicator I AIR RESTRICTION INDICATOR A high air restriction warning indicator light A flashing red indicator light, located in the current NFPA requirements. The HA The same circuit that activates the parking brake is released., be provided. A�� g compartment, will be illuminated automatically per labeled "Do Not Move Apparatus If Light Is On." Apparatus indicator will activate a pulsing alarm when There will be 14 gp's9**eAWsages displayed on the "Do Not Move Truck" screen, of the information center. The messa will designate the specified location of what open doors or other applicable options are not in the wed position (parking brake has been released). The foil owi sages will be displayed: DS C o Open (Driver Side Cab Door Open) PS Cab oor Open (Passenger's Side Cab Door Open) DS Crew Cab Door Open (Driver Side Crew Cab Door Open) PS Crew Cab Door Open (Passenger's Side Crew Cab Door Open) 36 of 106 DS Body Door Open (Driver Side Body Door Open) PS Body Door Open (Passenger's Side Body Door Open) Rear Body Door Open 44 V Handrail Not Stowed Any other device that is opened, extended, or deployed that c Nesahazard or is likely to cause damage to the apparatus if the apparatus is moved, will show in the fla mg warning box after the parking brake is disengaged. SWITCH PANELS The emergency light switch panel will have +aas, itch for ease of use plus individual switches for selective control. Each switch panel will co ight (8) membrane -type switches each rated for one million (1,000,000) cycles. Panels con m than eight (8) switch assignments will include non- functioning black appliquds. Docu will be provided by the manufacturer indicating the rated cycle life of the switches. The s h nel(s) will be located in the overhead position above the windshield on the driver sideldfteXtq allow for easy access. Additional switch 1 wi located in the overhead position(s) above the windshield or in designated locat' o the er instrument panel layout. The switches will be brane -type and also act as an integral indicator light. For quick, visual indication t re surface of the switch will be illuminated white whenever back lighting is activated and i inate een whenever the switch is active. An active illuminated switch will flash when interl rements are not met or device is actively being load managed. For ease of use, a two (2)- ply, sc tch resistant laser engraved Gravoply label indicating the use of each switch will be placed in the cen er of the switch. The label will allow light to pass through the letters for ease of use in low light conditions. SPARE CIRCUIT There will be four (4) pair of wires, including a positive and a negative, installed on the apparatus. 37 of 106 The above wires will have the following features: • The positive wire will be connected directly to the battery power. • The negative wire will be connected to ground'. • Wires will be protected to 10 amps at 12 volts DC. • Power and ground will terminate next to the 4 other 12V power ports. • Termination will be a Blue Sea Systems part number 1016 dual USB charger socket. • Wires will be sized to 125% of the protection. This circuit(s) may be load managed when the parking brake is applied. SPARE CIRCUIT There will be four (4) pair of wires, including a positive and a negative, i e t apparatus. The above wires will have the following features: • The positive wire will be connected directly to the batte er • The negative wire will be connected to ground • Wires will be protected to 15 amps at 12 volts DC • Power and ground will terminate on the offic side of t e engine tunnel, on the rear wall of the crew cab, driver's side, on the rear wall of the re b, passenger's side and on the driver's side of the engine tunnel • Termination will be with 15 amp, pow r in lug with rubber cover • Wires will be sized to 125 percent o otection The circuit(s) may be load managed w th parking brake is set. INFORMATION CENTER An information center e i " diagonal touch screen color LCD display will be encased in an ABS plastic housing. The information to wil ave the following specifications: • Opera a in tem ratures from -40 to 185 degrees Fahrenheit • An 16 Gel will be placed between the LCD and protective lens • e w er resistant user-interface switches • rey ith black accents • nlight Readable • Linux operating system • Minimum of 1000nits rated display • Display can be changed to an available foreign language • A LCD display integral to the cab gauge panel will be included as outlined in the cab instrumentation area. 38 of 106 • Programmed to read US Customary GENERAL SCREEN DESIGN Where possible, background colors will be used to provide "At a Glance" vehicle information. If information provided on a screen is within acceptable limits, a green background will be used. If a caution or warning situation arises the following will occur: • An amber background /text color will indicate a caution condition • A red background /text color will indicate a warning condition • The information center will utilize an "Alert Center" to display text mesa es for udi a alarm tones. The text messages will be written to identify the item(s) causing he le alarm to sound. If more than one (1) text message occurs, the messages wi a second until the problem(s) have been resolved. The background color for the "A rt n r" will change to indicate the.severity of the "warning" message. If a warning and a cau ' condition occur simultaneously, the red background color will be shown f 11 al center messages. • A label for each button will exist. The label will ind' ate the tion for each active button for each screen. Buttons that are not utilized on specifi ens l have a button label with no text or symbol. HOME/TRANSIT SCREEN This screen will display the following: • Vehicle Mitigation (if equipped) • Water Level (if equipped) • Foam Level (if equipped) • Seat Belt Monitoring Scr • Tire Pressure Monitor' ipped) • Digital Speedomet • Active Ala ON SCENE SCR This screen will displ the following and will be auto activated with pump engaged (if equipped): • it Pressure • oolant Temperature • RPM • Water Level (if equipped) • Foam Level (if equipped) • Foam Concentration (if equipped) 39 of 106 • Water Flow Rate (if equipped) • Water Used (if equipped) • Active Alarms VIRTUAL BUTTONS There will be four (4) virtual switch panel screens that match the overhead and lower lighting itch panels. PAGE SCREEN The page screen will display the following and allow the user to progress into other screens further functionality: • Diagnostics o Faults • Listed by order of occurrence • Allows to sort by system o Interlock • Throttle Interlocks • Pump Interlocks (if equipped) • Aerial Interlocks (if equipped) • PTO Interlocks (if equipped) o Load Manager A list of items to be io ed will be provided. The list will provide a description of the loa . ■ The lower the p 'grit u bers the earlier the device will be shed should a low voltage con ' r. The scree 'Il i dicate if a load has been shed (disabled) or not shed. ■ "At a a r features are utilized on this screen. o Systems o d Zone • Module type and ID number • Module Version • Input or output number • Circuit number connected to that input or output • Status of the input or output • Power and Constant Current module diagnostic information ■ Foam (if equipped) Pressure Controller (if equipped) ■ Generator Frequency (if equipped) o Live Data ■ General Truck Data 40 of 106 • Maintenance • Engine oil and filter • Transmission oil and filter • Pump oil (if equipped) • Foam (if equipped) • Aerial (if equipped) • Setup Ladder Rack (if applicable) • Clock Setup • Date & Time ■ ■ 12 or 24 hour format ■ ■ Set time and date • Backlight • Notifications • Daytime • Night time • Sensitivity • Unit Selection • Home Screen • Virtual Button Setup • On Scene Screen Setup o Configure Video Mode o Set Video Contrast ■ Set Video Color ■ Set Video Tint • Do Not Move o The screen will indi stowed for travel. e a ual ■ Tlrivar (" r)nn Pproximate location and type of item that is open or is not status of the following devices will be indicate ■ P n ' idd Cab Door ri ide Crew Cab Door assenger's Side Crew Cab Door ■ iver Side Body Doors ■ Passenger's Side Body Doors ■ Rear Body Door(s) ■ Ladder Rack (if applicable) ■ Deck Gun (if applicable) ■ Light Tower (if applicable) ■ Hatch Door (if applicable) ■ Stabilizers (if applicable) ■ Steps (if applicable) • Notifications 41 of 106 o View Active Alarms ■ Shows a list of all active alarms including date and time of the occurrence is shown with each alarm ■ Silence Alarms - All alarms are silenced • Timer Screen • Tire Information (if equipped) Button functions and button labels may change with each screen. VEHICLE DATA RECORDER A vehicle data recorder (VDR) will be provided. The VDR will be capable of r )i' a d storing AN vehicle information. The information stored on the VDR can be downloaded through a USB p rt u n a convenient location determined by cab model. A CD provided with the apparatus will in a the programming to download the information from the VDR. A USB cable can be u d to nett the VDR to a laptop to retrieve required information. The vehicle data recorder will.be capable of recording the folio ' data via hardwired and /or CAN inputs: • Vehicle Speed - MPH • Acceleration - MPH /sec • Deceleration - MPH/sec • Engine Speed - RPM • Engine Throttle Position - % o u11 hrottle • ABS Event - On/Off • Seat Occupied Status - y Position (7 -12 Seating Capacity) • Seat Belt Buckled s - es o by Position (7 -12 Seating Capacity) • Master Opt' ing evice Switch - On/Off • Time.- 2 Tim • Date - Year/ th /Dav F INT)E *SYSTEM A six ( osition David Clark, Model U3800, intercom system with single radio interface capability at the driv r and officer positions will be provided. The driver and officer will have a remote push-to- transmit button located per the switch panel drawing. Four (4) crew cab positions at four (4) forward facing seats will have intercom only. The following components shall be supplied with this system: 42 of 106 • Two (2) U3815 Radio Interface Modules (Driver, Officer) • Two (2) Remote PTT • One (1) U3800 Intercom Unit (2 Crew) • One (1) U3802 Single Intercom Headset Station (1 Crew) • One (1) U3801 Single Intercom Headset Station (1 Crew) • One (1) C3820 Power Cable • All necessary interconnect cables and connectors RADIO / INTERCOM INTERFACE INCLUDED All radio interfaced stations will have universal radio interfaces installed. routed within the cab to match 27231 . UNDER THE HELMET HEADSET There will be six (6) under the helmet, headset(s) provided D / O / 4 crew. Each David Clark, Model H3442, headset will feature: • 5' Coiled cord • Noise cancelling electric microphone • Flexible microphone boom rotates 200 degrees left or right dress • Microphone on /off button • Comfort Gel Earseals • 23 dB noise reduction HEADSET HANGERS There will be six (6) headset hange ed driver's seat, officer's seat, driver's side inboard forward facing seat, driver's side outboar rw d facing seat, passenger's side inboard forward facing seat and passenger's side outboard fo g seat. The hanger(s) will meet NFPA 1901, Section 14.1.11, requirement for equipmen unt g. There will be two Ninal tomer supplied two way radio(s) sent to the apparatus manufacturers preferred radio installer to bled to be provided per the shipping document. No antenna m u W or whip will be included in this option. Speci rad o shipping requirements will be followed. PORT BLE RADIO CHARGER INSTALLATION There will be four (4) customer supplied portable two -way radio chargers(s) sent to the apparatus manufacturers preferred radio installer to be installed to be provided. Specific shipping requirements will be followed. 43 of 106 ANTENNA ONLY, GPS There will be one (1) Laird /Antenex, Model GPSUI5M, low profile 3 -5 volt GPS antenna with active ceramic antenna element housed in durable ABS plastic installed onto the NMO mount located best location . RADIO ANTENNA MOUNT There will be three (3) standard 1.125 ", 18 thread antenna - mounting base(s) installed best lo ' on the crew cab roof on the cab roof with high efficiency, low loss, coaxial cable(s) routed 10 be ind t e officer seat. A weatherproof cap will be installed on the mount. VEHICLE CAMERA SYSTEM There will be a color vehicle camera system provided with the following: • One (1) camera located at the rear of the apparatus, pointing re ard, is 'ayed automatically with the vehicle in reverse • One (1) camera located on the passenger side of the appar s, p • ting rearward, displayed automatically with the passenger side turn signal • One (1) camera located on the driver side of the app s, poi ing rearward, displayed automatically with the driver side turn signal The camera images will be displayed on the driver's o x display. Audio from the microphone on the rear camera will be emitted by an amplified s volume control located behind the driver seat. The following components will be inclu • One (1) SV -CW 1346391 • Two (2) CS 134404CI Si • One (1) Amplified spa • All necessary ca e RECESS RE )E A rear camera reces 4* be provided in the center at the rear. ELECTRI OWER CONTROL SYSTEM The r p er distribution will be located forward of the officer's seating position and be easily acces He standing on the ground for simplified maintenance and troubleshooting. Additional electric distribution centers will be provided throughout the vehicle to house the vehicle's electrical power, circuit protection, and control components. The electrical distribution centers will be located strategically throughout the vehicle to minimize wire length. For ease of maintenance, all electrical distribution centers will be easily accessible. All distribution centers containing fuses, circuit breakers and /or relays will be easily accessible. 44 of 106 Distribution centers located throughout the vehicle will contain battery powered studs for supplying customer installed equipment thus providing a lower cost of ownership. Circuit protection devices, which conform to SAE standards, will be utilized to protect electrical circuits. All circuit protection devices will be rated per NFPA requirements to prevent wire and component damage when subjected to extreme current overload. General protection circuit breakers will be Type -I automatic reset (continuously resetting). When required, automotive type fus be utilized to protect electronic equipment. Control relays and solenoid will have a direct c rren ratin of 125 percent of the maximum current for which the circuit is protected per NFPA. SOLID -STATE CONTROL SYSTEM A solid -state electronics based control system will be utilized to achieve advan d o ation and control of the vehicle components. A fully computerized vehicle network will c nbilrii o c onic modules located near their point of use to reduce harness lengths and improve reli he control system will comply with SAE J1939 -11 recommended practices. The control system will operate as a master -slave system whereas t %ain control module instructs all other system components. The system will contain patente 'ssion ical software that maintains critical vehicle operations in the unlikely event of a main contro rror. The system will utilize a Real Time Operating System (RTOS) fully compliant wit EKND TM specifications providing a lower cost of ownership. For increased reliability and simplified use the c o system modules will include the following attributes: • Green LED indicator light for ff , odu p wer • Red LED indicator light fo communication stability status • Control system self test a id ion and continually throughout vehicle operation • No moving parts due o t si r logic • Software t-rical ' ro FPA mandated safety interlocks and indicators • Integrate ica stem load management without additional components • Integrated load sequencing system without additional components • Customized control software to the vehicle's configuration • Fact field re programmable to accommodate changes to the vehicle's operating me rs • om lete operating and troubleshooting manuals • SB connection to the main control module for advanced troubleshooting To assure long life and operation in a broad range of environmental conditions, the solid -state control system modules will meet the following specifications: • Module circuit board will meet SAE J771 specifications 45 of 106 • Operating temperature from 40C to +70C • Storage temperature from -40C to +70C • Vibration to 50g IP67 rated enclosure (Totally protected against dust and also protected against the effect of temporary immersion between 15 centimeters and one (1) meter) Operating voltage from eight (8) volts to 16 volts DC The main controller will activate status indicators and audible alarms designed to provide ing of problems before they become critical. CIRCUIT PROTECTION AND CONTROL DIAGRAM Copies of all job - specific, computer network input and output (1/0) conn do Qse, provided with each chassis. The sheets will indicate the function of each module connection t, circuit protection information (where applicable), wire numbers, wire colors and loman m t information. WP The on -board information center will include the following d • Text description of active warning or caution a s • Simplified warning indicators • Amber caution indication with intermitte a • Red warning indication with steady t fte All control system modules, with the a the main control module, will contain on -board visual diagnostic LEDs that assist in troub h The LEDs will be enclosed within the sealed, transparent module housing near a fa of the module. One LED for each input or output will be provided and will illuminate e - he respective input or output is active. Color -coded labels within the modules will e a th EDs for ease of identification. The LED indicator lights will provide point of use ' tion for reduced troubleshooting time without the need for an additional computer. 1 An in cab will provide Wifi wireless interface and data logging capability. (No Exception) The Wifi aced' 1 comply with IEE£ 802.11 b /g /n capabilities while communicating at 2.4 Gigahertz. The ill provide an external antenna connection allowing a line of site communication range of up to 3 , feet with a roof mounted antenna. The module will transmit a password protected web page to a wife enabled device (i.e. most smart phones, tablets or laptops) allowing two levels of user interaction. The firefighter level will allow vehicle monitoring of the vehicle and firefighting systems on the apparatus. The technician level will 46 of 106 allow diagnostic access to inputs and outputs installed on the Command ZoneTm, control and information system. The data logging capability will record faults from the engine, transmission, ABS and Command Zone* "m, control and information systems as they occur. No other data will be recorded at the time the fault occurs. The data logger will provide up to 2 Gigabytes of data storage. A USB connection will be provided on the Tech Module. It will provide a means to downloa logger information and update software in the device. PROGNOSTICS � A software based vehicle tool will be provided to predict remaining life of the eh s ritical fluid and events (no exceptions). The system will send automatic indications to the Command Zone, color ispl y nd /or wireless enabled device to proactively alert of upcoming service intervals. Prognostics will include: • Engine oil and filter • Transmission oil and filter • Pump oil (if equipped) • Foam oil (if equipped) • Aerial oil and filter (if equipped) ADVANCED DIAGNOSTICS An advanced, Windows -based, d The software will provide troubl computer or wireless enabledA- sware program will be provided for this control system. tools to service technicians equipped with a Windows -based The service and mainten Vce! are will be easy to understand and use and have the ability to view system input/out ation . A system wi Me provided which automatically tests basic indicator lights and alarms located on the cab instr ent p e . VOL ONITOR SYSTEM A vol4e monitoring system will be provided to indicate the status of the battery system connected to the vehicle's electrical load. The system will provide visual and audible warning when the system voltage is below or above optimum levels. The alarm will activate if the system falls below 11.8 volts DC for more than two (2) minutes. 47 of 106 DEDICATED RADIO EQUIPMENT CONNECTION POINTS There will be three (3) studs provided in the primary power distribution center located in front of the officer for two -way radio equipment. • The studs will consist of the following: • 12 -volt 40 -amp battery switched power • 12 -volt 60 -amp ignition switched power • 12 -volt 60 -amp direct battery power af There will also be a 12 -volt I00 -amp ground stud located in or adjacent to the power distrib ' n center. ENHANCED SOFTWARE The solid -state control system will include the following software enhancpt All perimeter lights and scene lights (where applicable) will be deactivated w* he parking brake is released. Cab and crew cab dome lights will remain on for ten (10) se nds fo proved visibility after the doors. close. The dome lights will dim after ten (10) seconds or imm ately if the vehicle is put into gear. Cab and crew cab perimeter lights will remain on for t 10) seconds for improved visibility after the doors close. The dome lights will dim after ten (10) co or immediately if the vehicle is put into gear. EMI/RFI PROTECTION To prevent erroneous signals from cros tdt o urination and interference, the electrical system will meet, at a minimum, SAE J551/2, thus uc ng undesired electromagnetic and radio frequency emissions. An advanced electric y will be used to ensure radiated and conducted electromagnetic interference dio frequency interference (RFI) emissions are suppressed at their source. The apparatus wi a th ility to operate in the electromagnetic environment typically found in fire ground operations nsure clean operations. The electrical system will meet, without exceptions, electromagnetic susce Ibility conforming to SAE J1113/25 Region 1, Class C EMR for IOKHz -1GHz to 100 Volt r. _ The vehicle OEM, upon request, will provide EMC testing reports from testing cond don ntire apparatus and will certify that the vehicle meets SAE J551/2 and SAE J1113/25 Regio s C EMR for IOKHz -IGHz to 100 Volts /Meter requirements. Component and partial (incom I te) vehicle testing is not adequate as overall vehicle design can impact test results and thus is not acc ptable by itself. EMURFI susceptibility will be controlled by applying appropriate circuit designs and shielding. The electrical system will be designed for full compatibility with low -level control signals and high- powered two -way radio communication systems. Harness and cable routing will be given careful attention to minimize the potential for conducting and radiated EMI /RFI susceptibility. 48 of 106 ELECTRICAL All 12 -volt electrical equipment installed by the apparatus manufacturer will conform to modern automotive practices. All wiring will be high temperature crosslink type. Wiring will be run, in loom or conduit, where exposed and have grommets where wire passes through sheet metal. Automatic reset circuit breakers will be provided which conform to SAE Standards. Wiring will be color, function and number coded. Function and number codes will be continuously imprinted on all wiring harn conductors at 2.00" intervals. Exterior exposed wire connectors will be positive locking, and environmentally sealed to withstand elements such as temperature extremes, moisture automot' e fluids. Electrical wiring and equipment will be installed utilizing the following guidel' I . All holes made in the roof will be caulked with silicon, rope caul t able. Large fender washers, liberally caulked, will be used when fastening eq ipm nt o the underside of the cab roof.. 2. Any electrical component that is installed in an exposed wil a mounted in a manner that will not allow moisture to accumulate in it. Expose ea wi defined as any location outside of the cab or body. 3. Electrical components designed to be remove or mainte ce will not be fastened with nuts and bolts. Metal screws will be used in mount' hese devices. Also a coil of wire will be provided behind the appliance to allow them t be lied away from mounting area for inspection and service work. 4. Corrosion preventative compound w -fte ed to all terminal plugs located outside of the cab or body. All non - waterproof con s ill require this compound in the plug to prevent corrosion and for easy separati (o a plug). 5. All lights that have their so weather exposed area will have corrosion preventative compound added to the s t t inal area. 6. All electrical termin s in p . d areas will have silicon (1890) applied completely over the metal portion of t al. All lights and re , re cy fired to comply with Federal Motor Vehicle Safety Standard #108, will be furnished. Rear iden tion lights will be recessed mounted for protection. Lights and wiring mounted in the rear b Wheads ill be protected from damage by installing a false bulkhead inside the rear com artmen An op io I test will be conducted to ensure that any equipment that is permanently attached to the electric system is properly connected and in working order. The results of the tests will be recorded and provided to the purchaser at time of delivery BATTERY SYSTEM Six (6) 12 volt, Deka, Model 123 IMF, maintenance free group 31 batteries that include the following features, each, will be provided: 49 of 106 0 1000 CCA (cold cranking amps) 0 185 reserve capacity o High cycle o Ref. CA of 1190 at 0 degrees Fahrenheit 0 185 reserve capacity 0 Threaded studs There will be a single starting system with an ignition switch and starter button provided a ocaTed on the cab instrument panel. MASTER BATTERY SWITCH There will be a master battery switch provided within the cab within easy ea 1 o driver to activate the battery system. An indicator light will be provided on the instrument panel to no the iver of the status of the battery system. BATTERY COMPARTMENTS Batteries will be placed on non - corrosive mats and b red in i Yell-ventilated compartments located under the cab. Heavy -duty battery cables will be used to provid a imum power to the electrical system. Cables will be color - coded. !°k Battery terminal connections will be co to iti anti- corrosion compound. Battery solenoid terminal connections will be encapsulated w' ermanent rubberized compound. JUMPER STUDS One (1) set of battery jum tud wi plastic color -coded covers will be installed on the front side of battery box on the ide. his will allow enough room for easy jumper cable access. A Kussmaul uto Ch, a D, Model #091- 66 -12, dual independent, automatic battery charger, with internal batt ver and engine battery options will be provided. A dual display, bar graph indicating the s f cha will be included. The ve icle attery output will be capable of supplying up to 25 amps for charging the batteries. The engine battery output will be capable of supplying up to three (3) amps for charging the battery, such as an auxiliary battery. The battery saver circuit will be capable of supplying up to five (5) amps for external loads such as hand lights or auxiliary radio batteries. 50 of 106 The battery charger will be wired to the AC shoreline inlet through an AC receptacle adjacent to this battery charger. Battery charger will be located behind the driver seat. The battery charger indicator will be located on the driver's seat riser. KUSSMAUL AUTO EJECT FOR SHORELINE There will be one (1) Kussmaul Model 091-55-15-120,15 amp 120 volt AC shoreline i t(s) provi ed to operate the dedicated 120 volt AC circuits on the apparatus without the use of the gene The shoreline inlet(s) will include yellow weatherproof flip up cover(s). There will be a release solenoid wired to the vehicle's starter to eject the to when the engine is starting.. The shoreline(s) will be connected to batter charger. There will be a mating connector body supplied with the to Neequ.ing: There will be a label installed near the inlet(s) that sta a the • Line Voltage • Current Ratting (amps) • Phase • Frequency The shoreline receptacle will be locate n t driver side of cab, above wheel. ALTERNATOR A Delco Remy®, Model 55 , a - will be provided. It will have a rated output current of 430 amps, as measured by SJA 0 J5 The alternator will feature an integral regulator and rectifier system that has b to d qualified to an ambient temperature of 257 degrees Fahrenheit (125 degrees Celsius . alter ator will be connected to the power and ground distribution system with heavy -duty cables siz o carry the full rated alternator output. RADIO SP RS Ther o (2) pair of Panasonic 5.25" diameter coaxial speakers mounted in the cab. One r(lairill be mounted in the cab and one (1) pair will be mounted in the crew cab. The speakers will be spaced from the headliner 1.00" to provide adequate space between the speaker magnet and roof structure. The speakers wires will be routed to cab ceiling 2 front and 2 rear for the customer mounted radio. 51 of 106 ELECTRONIC LOAD MANAGER An electronic load management (ELM) system will be provided that monitors the vehicles 12 -volt electrical system, automatically reducing the electrical load in the event of a low voltage condition, and automatically restoring the shed electrical loads when a low voltage condition expires. This ensures the integrity of the electrical system. The system will include the following features: System voltage monitoring. A shed load will remain inactive for a minimum of five minutes to prevent the load from cyc g on and off. Sixteen available electronic load shedding levels. Priority levels can be set for individual outputs. High Idle to not be controlled by the load manager. If enabled: "Load Man Hi -Idle On" will display on the informatio _enter. Hi -Idle will not activate until 30 seconds after en P. Individual switch "on" indicator to flash wherfthPOWicular load has been shed. The information center indicates The information center includes o anager" screen indicating the following: Load managed items list, wi P i vels and item condition. Individual load m m condition: ON = not shed SHED = Shed"'- SE A seq ce will be provided that automatically activates and deactivates vehicle loads in a preset sequen thereby protecting the alternator from power surges. This sequencer operation will allow a gradual increase or decrease in alternator output, rather than loading or dumping the entire 12 volt load to prolong the life of the alternator.' 52 of 106 Emergency light sequencing will operate in conjunction with the emergency master light switch. When the emergency master switch is activated, the emergency lights will be activated one by one at half second intervals. Sequenced emergency light switch indicators will flash while waiting for activation. When the emergency master switch is deactivated, the sequencer will deactivate the warning light loads in the reverse order. Sequencing of the following items will also occur, in conjunction with the ignition switch, at _ and intervals: Cab Heater and Air Conditioning Third Evaporator (if applicable) HEADLIGHTS N*1�01 There will be four (4) JW Speaker Evolution, Model t, 5.60" round LED lights with polycarbonate lenses mounted in the front chrome trim housing on ch ' of the cab grille: • One (1) part number 0549911, low an h b installed in the outside position on the driver's side. • One (1) part number 0549911, 1 dV h beam installed in the inside position on the driver's side. • One (1) part number 054 1, w and high beam installed in the inside position on the passenger's side. • One (1) part numb 49 11, - ow and high beam installed in the outside position on the passenger' Ther hillbbei—qV(2) Whelen 600® series, LED combination directional /marker lights provided. The lights bcated on the outside cab corners, next to the headlights. The coe lenses will be clear. INTERMEDIATE LIGHT There will be two (2) Truck- Lite ®, Model 60115Y, amber LED lights furnished, one (1) each side, horizontally in the rear fender panel. The light will double as a turn signal and marker light. 53 of 106 A stainless steel trim will be included with this installation. CAB CLEARANCE/MARKER/ID LIGHTS There will be five (5) Grote, Model 47063, amber LED lights provided to indicate the presence and overall width of the vehicle in the following locations: • Three (3) amber LED identification lights will be installed in the center of the "eye br " trim above the windshield. • Two (2) amber clearance /marker lights will be installed, one (1) on each outbo We of "eye brow" trim above the windshield. FRONT CAB SIDE DIRECTIONAUMARKER LIGHTS There will be two (2) Truck -Liter Model 19036Y, amber. LED lights insta o umper, one (1) on each side of the cab. The lights will activate as marker lights with the headlight switch d dir io I lights with the corresponding directional circuit. REAR CLEARANCE/MARKER/ID LIGHTING There will be three (3) Truck- Lite ®, Model 33050R, D lights ed as identification lights recessed and located at the rear of the apparatus per the followi . • As close as practical to the vertical center • Centers spaced not less than 6.00" or 12.00 ". apart • Red in color • All at the same height There will be two (2) Truck -Lite, 0 33050R, LED lights recessed at the rear of the apparatus used as clearance lights located at)hW � . the apparatus per the following: • To indicate t o ralldth of the vehicle • One (1) s e o he vertical centerline • As near the as practical • Red I olor • To b le from the rear • t t same height There ' be. two (2) Truck -Lite, Model 33050R, LED lights recessed.on the side of the apparatus as marker ights as close to the rear as practical per the following: • To indicate the overall length of the vehicle • One (1) each side of the vertical centerline • As near the top as practical 54 of 106 • Red in color • To be visible from the side • All at the same height There will be two (2) red reflectors located on the rear of the truck facing to the rear. One (1) each side, as far to the outside as practical, at a minimum of 15.00 ", but no more than 60.00 ", above the mund. There will be two (2) red reflectors located on the side of the truck facing to the side. One (1) ac ide, as far to the rear as practical, at a minimum of 15.00 ", but no more than 60.00 ", above t oun Per FMVSS 108 and CMVSS 108 requirements. ' REAR FMVSS LIGHTING The rear stop /tail and directional LED lighting will consist of the following: • Two (2) Whelen ®, Model M613TT, red LED stop /tail lig • Two (2) Whelen, Model M6T, amber LED arrow to lights The lights shall be provided with clear lenses. The lights will be mounted in a polished combination o ' g. There will be two (2) Whelen Model M613UW,1, llac up lights provided in the tail light housing. I LICENSE PLATE BRACKET There will be one (1) license plate brac et =ed on the rear of the body. A white LED light will illuminat a ense plate. A polished stainless steel light shield will be provided over the light that w' umination downward, preventing white light to the rear. LIGHTING BEZEL There will be tw h Model M6FCV4P, four (4) place chromed ABS housings with Pierce logos provided o rear 6 series stop /tail, directional, back up, scene lights or warning lights. D A X1 1V I TIM A i A n It R A PRECO, 1040, solid -state electronic audible back -up alarm that actuates when the truck is shifte rse will be provided. The device will sound at 60 pulses per minute and automatically adjust vo ume to maintain a minimum ten (10) dBA above surrounding environmental noise levels. There will be four (4) Truck -Lite, Model 6060C, 12 volt DC white LED lights provided as step and perimeter illumination. Each light is an integral part of the inside door panels. • One (1) LED light will be installed under the driver's side cab arm rest. 55 of 106 J • One (1) LED light will be installed under the driver's side crew cab arm rest. • One (1) LED light will be installed under the passenger's side crew cab arm rest. • One (1) LED light will be installed under the passenger's side cab arm rest. The lights will be activated when the battery switch is on and the respective door is open. PUMP HOUSE PERIMETER LIGHTS There will be two (2) Truck -Lite, Model 6060C, 6.00" oval LED 12 volt DC weatherproof lig s w h grommets provided under the pump panel running boards, one (1) each side. The lights will be controlled by the same means as the body perimeter lights. IF BODY PERIMETER SCENE LIGHTS There will be two (2) Truck -Lite, Model 6060C, 6.00" x 2.00" oval LED gh wt odel 60700, grommets provided under at the rear step area of the body, one (1) each side s i g to the rear. The perimeter scene lights will be activated when a switch withi ch the driver is activated and the parking brake is applied. STEP LIGHTS There will be two (2) white LED step lights will be p 'ded at the rear to illuminate the tailboard /step area. VAW In order to ensure exceptional illumination, each ht ill provide a minimum of 25 foot - candles (fc) covering an entire 15" x 1.5" square placed t n ches below the light and a minimum of 1.5 fc covering an entire 30" x 30" square at t4vwWW1 (10) inch distance below the light. These step lights will be actuated vpVV Wrimeter scene lights. All other steps on the apparatpftlfWilluminated per the current edition of NFPA 1901. 12 VOLT LIGHTING AC There will be on 1) he Pioneer, Model PCP2P1, 12 volt DC LED combination spot/floodlight(s) with aswitch on th ht head provided on a Fire Research, Model LTP540- NWO- HT100, side mount, pull up pole w'th top re. The ' hts wt b ocated p/s rear crew cab wall. A con fo the light(s) selected above will be the following: • a switch at the driver's side switch panel. • a switch at the passenger's side switch panel. • a switch at the pump operator's panel. • no additional switch location. 56 of 106 These light(s) may be load managed when the parking brake is applied. The lights will be connected to the "Do Not Move Truck" light in the cab. 12 VOLT LIGHTING There will be one (1) Whelen Pioneer, Model PCP2P1, 12 volt DC LED combination spot/floodlight(s) with a switch on the light head provided on a Fire Research, Model LTP540- NW&HT100, siO mount, pull up pole with top wire. The lights will be located d/s rear crew cab wall. A control for the light(s) selected above will be the following: • a switch at the driver's side switch panel. • a switch at the passenger's side switch panel. • a switch at the pump operator's panel. • no additional switch location. These light(s) may be load managed when the parking brak ppli The lights will be connected to the "Do Not Move T " light i he cab. 12 VOLT LIGHTING There will be one (1) Whelen® PioneerTM, Mod , 12 volt LED combination spot/flood light(s) provided on the front visor, centered. The painted parts of this light assembly j0% te. The 1'ight(s).will be controlled by tow ng: • a switch at the driver' si s panel • a switch at the p n ' side switch panel • no additi al itc - cation These light(s)) may b d managed when the parking brake is set. HOSE BE TS The. a ,odor LumaBar H2O, Model AY- 9750 -20, 20.00" white 12 volt DC LED light strips provi to uminate the hose bed area. • ne (1) LED light strip will be installed on the driver's side hose bed cover 30.00" from the front of the hose bed, as close to the hinge as practical. • One (1) LED light strip will be installed on the passenger's side hose bed cover 30.00" from the rear of the hose bed, as close to the hinge as practical. The lights will be activated when the hosebed cover is raised. 57 of 106 REAR SCENE LIGHTS There will be two (2) Whelen, Model M9LZC, LED scene lights with chrome trim bezels installed at the rear of the apparatus. These lights will be installed between 30.00" and 102.00" above the ground. The lights will be controlled by a switch at the driver's side switch panel, by a switch at the passenger's side switch panel and by a cup switch at the driver's side rear bulkhead. WATER TANK Booster tank will have a capacity of 750 gallons and be constructed of UV stabilized ul : igh i ct polypropylene plastic by a manufacturer with a minimum of 20 years experience building s is ISO 9001:2000 certified in all its manufacturing facilities, and has over 50,000 tank ervie. The booster tank will be a form - fitting design that serves to keep the tank h to as possible. The tank will be no wider than 39.00" at the base to allow for greater comp en de and no wider than 53.00" at the top. Tank joints and seams will be nitrogen welded inside and out. Tank will be baffled in accordance with NFPA Bulletin 19 uire ents. Baffles will have vent openings at both the top and b to permit movement of air and water between compartments. Longitudinal partitions will be constructed of .3 of — pylene plastic and will extend from the bottom of the tank through the top cover to ositive welding. Transverse partitions will extend from .0 the bottom of the tank to the underside of the top cover. All partitions will interlock and elded to the tank bottom and sides. Tank top will be constructed f . ' ropylene. It will be recessed .38" and will be welded to the tank sides and the lon it m itions. Tank top will b entl supported to keep it rigid during fast filling conditions. Construction ill incl a 2.00" polypropylene dowels spaced no more than 30.00" apart and welded to the transve itions. Two (2) of the dowels will be drilled and tapped (.50" diameter, 13.00" deep). to ac da ifting eyes. A sum that is 8.00" long x 8.00" wide x 6.00" deep will be provided at the bottom of the water tank. Sump will include a drain plug and the tank outlet. Tank will be installed in a fabricated cradle assembly constructed of structural steel. 58 of 106 Sufficient crossmembers will be provided to properly support bottom of tank. Crossmembers will be constructed of steel bar channel or rectangular tubing.. Tank will "float" in cradle to avoid torsional stress caused by chassis frame flexing. Rubber cushions, .50" thick x 3.00" wide, will be placed on all horizontal surfaces that the tank rests on. Stops or other provision will be provided to prevent an empty tank from bouncing excessivel hile moving vehicle. Mounting system will be approved by the tank manufacturer. Fill tower will be constructed of.50" polypropylene and will be a minimum of " w x 14.00" long. Fill tower will be furnished with a.25" thick polypropylene screen and a ve An overflow pipe, constructed of 4.00" schedule 40 polypropylene, will be in d approximately halfway down the fill tower and extend through the water tank an, it exit t'ie Fear of the rear axle. Three (3) sleeves will be provided in the water tank for a 3. "pipe t rear. BODY HEIGHT The height of the body will be 89.00" from the bottom the body to the top of the body. HOSE BED The hose. bed will be fabricated of. 125 "-5052 al in m with a nominal 38,000 psi tensile strength. Flooring of the hose bed will be remova m um grating with the top surface corrugated to aid in hose aeration. The grating slats will be mi 'mum of 0.50" x 4.50" with spacing between slats for hose ventilation. Hose bed will accommodate t - 200'x 2.50" DJ Hose / 150'x 1.75 DJ Hose / 13.00" space for storage / 600' x 2.50" DJ 7 'x .00" LDH / 200'x 1.50" SJ Hose. HOSE BED D Five (5) adjustable �, ; ebed dividers will be furnished for separating hose. Each divid w be constructed of a .125" brushed aluminum sheet fitted and fastened into a slotted, 1.50' ' mete iused extrusion along the top, bottom, and rear edge. Divid ill a fully adjustable by sliding in tracks, located at the front and rear of the hose bed. Divider will be held in place by tightening bolts, at each end. Acorn nuts will be installed on all bolts in the hose bed which have exposed threads. 59 of 106 HOSE BED COVER ELECTRIC ACTUATOR A two (2).section hose bed cover, constructed of. 125 " bright aluminum treadplate will be furnished. The cover will be hinged with full length stainless steel piano hinge. The sides will be slanted down with the center of the cover supported by a stationary bridgework support. The covers will not over lap. The cover will be reinforced so that it can support the weight of a man walking on the cover. The cover is designed with the left cover opening first. A pneumatic gas spring assist will be installed at the rear of the covers to help support aNint i a the cover throughout its range of motion. Access doors to the actuator arms will be provide hosebe d cover. The access doors will allow the customer to remove the actuator arm fr m minum cover so that the cover can be operated manually if needed. The access doors w' a de f aluminum treadplate and will be located on both sides of each actuator arm. i If access to water tank fill tower is blocked by the hose bed cover then a WgM door will be provided in it so that tank may be filled without raising cover doors. Chrome grab handles and two (2) (one (1) each side) electric r actuator with brake cylinders will be provided to assist in opening and closing the cover. rubber -co ed switch will be provided for each actuator that controls the opening and closing of the c s. Each switch will be located at the rear body of the body driver side. Additional locks on top of th co are not required to secure the cover in the nested position. A handrail will be provided at the rear, in th r of the support, to assist in climbing up the back of the truck. . HOSEBED END FLAP A pair of black vinyl flaps sha a st lled on the rear, one for each of the aluminum treadplate hose bed covers. Each vinyl flap s ve a (3) nylon tie down straps, with quick release thumb spring buckles. Fasnap model 2 stain ess steel buckles shall be attached to the flaps. These vinyl end skirts shall be installed directly t e hosebed frame. Rubber coat ks and stainless steel footman loops shall secure the end skirts/bed covers to the main body. NT-1 RU G BOARDS A running board will be provided on each side of the front body to allow access to the backboard /crosslay storage area. The running boards will be designed with a grip pattern punched into .125" bright aluminum treadplate material providing support, slip resistance, and drainage. 60 of 106 TAILBOARD The tailboard will be constructed of. 125" bright aluminum treadplate and spaced .50" from the body, as well as supported by a structural steel assembly. The tailboard area will be 20.00" deep and full width. of the body. The exterior side will be flanged down and in for increased rigidity of tailboard structure. REAR WALL, BODY MATERIAL, PUC The rear wall will be smooth and the same material as the body. The rear wall body material will be painted. Unpainted aluminum overlays wi roed to allow for chevron application and to provide continuously smooth rear wall panels. The outboard edges of the rear wall will be trimmed in polished stainless tee TOW BAR A tow bar will be installed under the tailboard at center of truck. Tow bar will be fabricated of 1.00" CRS bar rolled into a 3.0 dins. Tow bar assembly will be constructed of .38" structure gle. When force is applied to the bar, it will be transmitted to the frame rail. Tow bar assembly will be designed and posi&'P'ine flow up to a 30- degree upward angled pull of 17,000 lb, or a 20,000 lb straight horizontal with the centerline of the vehicle. Tow bar design will have been fully to d a evaluated using strain gauge testing and finite element analysis techniques. COMPARTMENTATION The apparatus body will b t al inum construction using a minimum of. 125" thick, 5052 -1-132 aluminum. The body panel ass bl will be constructed in a fixture and consist of formed sheet metal for the front and rear bulk ads, d r frames, floors, ceilings, and back walls. These parts will be welded together to ensure grea gevity with no visible welds in compartment interior. Weld ction will consist of 1.00" x .38" engineered plug weld holes that control the size, locatio and the amount of weld required. The bodies will be assembled and welded from engineered prints t at call out the size, location, and type of weld required. In structural areas the sheet metal components will have flanges for welding. No butt joints will be allowed. Gussets and support posts will be provided for additional strength where needed. 61 of 106 The fender panel will be an integral part of the complete welded body assembly. All light and compartment holes are pre punched prior to construction to provide accuracy and rounded corners to prevent stress risers in the material. Circular fender liners will be provided. For prevention of paint chips and ease of suspension maintenance the fender liners will be formed from brush finished 304L stainless steel, be unpai ted, and removable for suspension maintenance. Compartment flooring will be of the sweep out design with the floor minimum of 1.00" Meer tha he compartment door lip. Drip protection will be provided above the doors by means of aluminum extra on, ffirmed bright aluminum treadplate. The top of the compartment will be sheet metal and covered with bright a umi treadplate rolled over the edges on the front, and rear. These covers will have the come s weld . The aluminum treadplate covers will not make up the ceilin Nooff he c artment. All screws and bolts, which are not Grade 8, will be stainles d where they protrude into a compartment will have acorn nuts on the ends to pre injury. UNDERBODY SUPPORT SYSTEM Due to the severe loading requirements of this p e a method of.body and compartment support suitable for the intended load will be provid 'The backbone of the body support cysPare 1 egin with the chassis frame rails which is the strongest component of the chassis and is de ' sustaining maximum loads. The support system will include lateral frame rail extensi tormed from .375" 80k high strength steel and bolted to the chassis frame rails with .6257trMeT&Grade 8 bolts. The vertical and ho ' n meners of the frame rail extensions are to be reinforced with welded gussets and exte" o e o ode edge of the body. The lateral frame extensions will be electro- coated for superior corrosi a istance. The floatin s cture will be separated from4he lateral frame extensions with neoprene elastomer Isola Theses rsolators will reduce the natural flex stress of the chassis from being transmitted to the body, rb road shock and vibration. The iso tors will have a broad load range, proven viability in vehicular applications, be of a fail safe design and allow for all necessary movement in three (3) transitional and rotational modes. The neoprene isolators will be installed in a modified V three (3) -point mounting pattern to reduce the natural flex of the chassis being transmitted to the body. Two (2) 3.50" diameter isolators are provided at the front of the body near the centerline of the vehicle above the chassis frame. A minimum of eight 62 of 106 (8) - 2.55" diameter isolators will be provided, two (2) under each front compartment and two (2) under each rear side compartment. A minimum of four (4) 3.50" diameter isolators will be provided under the rear compartment. A design with body compartments simply hanging/sitting on the chassis in an unsupported (cantilever) fashion will not be acceptable. AGGRESSIVE WALKING SURFACE All exterior surfaces designated as stepping, standing, and walking areas will comply w*' bred average slip resistance of the current NFPA standards. Documentation of the material meet he standard will be provided at time of delivery. LOUVERS All body compartments will have a minimum of one (1) set of automotiv 2�vitrtt4mefit. s resistant louvers pressed into a wall. The louvers will incorporate a one (I)-way rubber vrovides airflow out of the compartment and prevents water and dirt from gaining access the Compartments over the wheel will not have louvers. TESTING OF BODY DESIGN Body structural analysis will be fully tested. Proven ineering d test techniques such as finite element analysis and strain gauging have been perfo ith special attention given to fatigue life and structural integrity of the body and substructure. The body will be tested while loaded to its g date service weight. The criteria used during he testing ro include: g gP - Raising opposite corners of the s 9.00" to simulate the twisting a truck may experience when driving over a curb. - Making a 90 degree turp jivi g at 20 mph to simulate aggressive driving conditions. - Driving the ve ' atmph a on a washboard road. - Driving the vehicle 5 mph on a smooth road. vehicle fully, until reaching the approximate speed of 45 mph on rough pavement. actual testing techniques will be made available upon request. FEA wif] have been performed on all substructure components. COMPARTMENTATION, DRIVER'S SIDE A full height, roll -up door compartment ahead of the rear wheels will be provided. The pump operator's panel will be located in this compartment. The interior dimensions of this compartment will be 62.00" wide x 53.50" high x 25.88" deep. The area behind the roll up door spool will be notched for exterior 63 of 106 storage or larger capacity water tank tee. The depth of the compartment will be calculated with the compartment door closed. The compartment interior will be fully open from the compartment ceiling to the compartment floor and designed so that no permanent dividers are required between the upper and lower sections. The clear door opening of this compartment will be 59.00" wide x 53.50" high. Closing of the door will not require releasing, unlocking, or unlatching any mechanism and will easily be accomplished with one hand. A roll -up door compartment over the rear wheels will be provided. The interior dimens' of th' compartment will be 60.00" wide x 22.75" high x 25.88" deep. The area behind the roll up r spool will be notched for exterior storage or larger capacity water tank tee. The dept he c, tnp ent will be calculated with the compartment door closed. The clear door opening of thi co rtment will be 57.00" wide x 22.75" high. Closing of the door will not require releasing, unlocking, or unlatching any m nism and will easily be accomplished with one hand. A full height, roll -up door compartment behind the rear wh will b rovided. The interior dimensions of this compartment will be 52.00" wide x 54.50 "' x 25.88" deep. The area behind the roll up door spool will be notched for exterior storag larger c acity water tank tee. The depth of the compartment will be calculated with the compartmen closed. The compartment interior will be fully open from the compartment ceiling to the co floor and designed so that no permanent dividers are required between the upper and low ec dons. The clear door opening of this compartment will be 49.00" wide x 54.50" high. Closing of the door will not require rel in u locking, or unlatching any mechanism and will easily be accomplished with one hand. All compartments will includpq*ift6n below the roll of the door. A full height, j o ' ortment with a roll -up door ahead of the rear wheels will be provided, as convenient large st a compartment for often used items for the crew. The interior dimensions of this compartment ill be .00" wide x 54.50" high x 25.88" deep. The area behind the roll up door spool will be notc exterior storage or larger capacity water tank tee. The depth of the compartment will be ca ted writ the compartment door closed. The compartment interior will be fully open from the comp ceiling to the compartment floor and designed so that no permanent dividers are required betwee he upper and lower sections. The clear door opening of this compartment will be 59.00 wide x 54.50 high. Closing of the door will not require releasing, unlocking, or unlatching any mechanism and will easily be accomplished with one hand. 64 of 106 A roll -up door compartment over the rear wheels will be provided. The interior dimensions of this compartment will be 60.00" wide x 23.00" high x 25.88" deep. The area behind the roll up door spool will be notched for exterior storage or larger capacity water tank tee. The depth of the compartment will be calculated with the compartment door closed. The clear door opening of this compartment will be 57.00" wide x 23.00" high. Closing of the door will not require releasing, unlocking, or unlatching any mechanism and ily be accomplished with one hand. A full height, roll -up door compartment behind the rear wheels will be provided. The inters dimensions of this compartment will be 52.00" wide x 54.50" high x 25.88" dee eea hind the roll up door spool will be notched for exterior storage or larger capacity water k . The depth of the compartment will be calculated with the compartment door closed. The Jr nterior will be fully open from the compartment ceiling to the compartment floor and de ign that no permanent dividers are required between the upper and lower sections. The clear doo o mg of this compartment will be 49.00" wide x 54.50" high. Closing of the door will not require releasing, unlocking, or atchin ny mechanism and will easily be accomplished with one hand. All compartments will include a drip pan below the r the door. ROLLUP DOOR, SIDE COMPARTMENTS There will be six (6) compartment doors ins He a side compartments, double faced, aluminum construction, painted one (1) color to match portion of the body and manufactured by AMDORTm brand rollup doors. Door(s) will be constructed usin 00 xtruded double wall aluminum slats which will feature a flat smooth interior surface to pr mum protection against equipment hang -up. The slats will be connected with a structur ven all d socket hinge designed to provide maximum curtain diaphragm streng ing and adjusting the curtain will be done with a clip system that connects the curtain to th a er m allowing for easy tension adjustment without tools. The slats will be mounted in reusable t shoes with positive snap -lock securement. Each slat wi rporate weather tight recessed dual durometer seals. One (1) fin will be designed to brat seal Thin the extrusion. The second will serve as a wiping seal which will alsoaliow for comp o o prevent water ingression. The do will be mounted in a one (1) -piece aluminum side frame with recessed side seals to minimize seal damage during equipment deployment. All seals including side frames, top gutters and bottom panel are to be manufactured utilizing non - marring materials. Bottom panel flange of rollup door will be equipped with two (2) cut -outs to allow for easier access with gloved hands. 65 of 106 A stainless steel lift bar to be provided for opening the door and located at the bottom of each door with latches on the outer extrusion of the door frame. A ledge to be supplied over lift bar for additional area to aid in closing the door. The lift bar will be located at the bottom of door with striker latches installed at the base of the side frames. Side frame mounted door strikers will include support beneath the stainless steel lift :bar to prevent door curtain bounce, improve bottom seal life expectancy and to avoid false door ajar signals. All injection molded rollup door wear components will be constructed of Type 6 nylon. Each rollup door will have a 3.00 inch diameter balancer /tensioner drum to assist in lifting Spor. The header for the rollup door assembly will not exceed 4.00 ". A heavy -duty magnetic switch will be used for control of open compart o ing lights. COMPARTMENTATION. REAR A roll -up door compartment above the rear tailboard shall be pro d. Interior dimensions of this compartment shall be approxima 36.75 ide x 42.38" high x 25.88" deep in the lower 33.75" of height and 15.75" deep in the remai upper portion. Depth of the compartment shall be calculated with the compartme oor clos d. A removable access panel shall be furnished on th b l of the compartment. Rear compartment shall be open to the rear s Kidirtments. The transverse opening will be a minimum of approximately 22.00" wide x 2 igh. Clear door opening of this compartmen a be 33.50 wide x 33.75" high. Closing of the door shall not re a asing, unlocking, or unlatching any mechanism and shall easily be accomplished with one h d. The rear comparNoBtAvill Dave a roll -up door. The door will be doub'K faced, aluminum construction, satin aluminum and manufactured by AMDORTM roll -up doors. The d o be constructed using 1.00" extruded double wall aluminum slats which will feature a flat smoot 'nterior surface to provide maximum protection against equipment hang -up. The slats will be connec d with a structural driven ball and socket hinge designed to provide maximum curtain diaphragm strength. Mounting and adjusting the curtain will be done with a clip system that connects the curtain to the balancer drum allowing for easy tension adjustment without tools. The slats will be mounted in reusable slat shoes with positive snap -lock securement. 66 of 106 Each slat will incorporate weather tight recessed dual durometer seals. One (1) fin will be designed to locate the seal within the extrusion. The second will serve as a wiping seal which will also allow for compression to prevent water ingression. The door will be mounted in a one (1) 7piece aluminum side frame with recessed side seals to minimize seal damage during equipment deployment. All seals including side frames, top gutters and bo om panel are to be manufactured utilizing non - marring materials. Bottom panel flange of roll -up door will be equipped with two (2) cut -outs to allow for 'er acc with gloved hands. A stainless steel lift bar to be provided for opening the door and located at the ott each door with latches on the outer extrusion of the door frame. A ledge to be supplied o i ar r additional area to aid in closing the door. The lift bar will be located at the bottom of do r w try er latches installed at the base of the side frames. Side frame mounted door strikers will include ort beneath the stainless steel lift bar to prevent door curtain bounce, improve bo m se ife expectancy and to avoid false door ajar signals. All injection molded roll -up door wear components will be co ucted of Type 6 nylon. The door will have a 3.00 inch diameter balancer /tensi r drum to assist in lifting the door. The header for the roll -up door assembly will A heavy -duty magnetic switch will be used ELECTRIC DOOR LOCKS There will be one (1) door(s)1< direct: The switch for control M of open compartment door warning lights. with electric locks. The locks will be wired battery stake. In the event of loss of power, a manual override or artment(s) with two (2) white 12 volt DC LED compartment light strips. be centered vertically along each side of the door framing. There will be two rtment.The dual light strips will be in compartment(s): each compartment. dmpartments without light strips will have a 6.00" diameter Truck -Lite, Model: 79384 will have a number 1076 one filament, two wire bulb. compartment door will automatically turn the compartment lighting on. HATCH COMPARTMENTS Hatch compartments with two (2) lift -up, top opening hatch doors will be provided above the driver and passenger side body compartments. Each hatch compartment will extend the full length of the side body compartmentation x 14.00" wide x 22.00" maximum depth. The compartments will extend the full 67 of 106 length of the side body compartmentation except for a 20.00" recessed step area at the rear of the compartment on the access ladder side. Sides of the compartments will be constructed of the same material as the body and painted job color on the outside panels. Top of the compartments will be constructed of bright aluminum treadplate. Two (2) lift -up, bright aluminum treadplate doors will be provided on the top of each ha compartment. Each door will have a lever handle with a slam style latch to hold the doors the osed position. These double pan doors will have lipped edges with a rubber seal for weather r 'st e. Doors will be hinged on the outboard side and will utilize a chain to keep the oo within manageable reach when open. The compartments will have a 3/4" drain that extends to below the y. Ribbed rubber matting will be provided on the compartment to stop wet equipment from sitting in water pools. HATCH COMPARTMENT LIGHTING There will be LED strip lights mounted full lengV nterior, hinged side of each compartment. Opening the hatch compartment door will at turn the hatch compartment lighting on. to support the adjustable shelf(s). n order to provide the greatest compartment space and .t except for the one that contains the pump operator's f 500 lb provided. The shelf construction will consist of ;If will as wide and as deep as the compartment space y. Each shelf will be infinitely adjustable by means of a threaded fastener, which slides in a track. The shelves will be held in place by .12" thick stamped plated brackets and bolts. 68 of 106 The location will be DI -one upper at the break and one lower, D3 -three upper, PI-one upper at the break and one lower, P2- one.forward of the vertical partition, P3-one half way and one upper. SLIDE -OUT ADJUSTABLE HEIGHT TRAY There will be two °(2) slide -out trays provided. Each tray will have 2.00" high sides and a capacity rating of up to 500 lb in the extended pos' n. Each tray will be painted to match the compartment interior. Each tray will be mounted on a pair of side mounted slides. The slide mechanisms will have • N bearings for ease of operation and years of dependable service. The slides will u d to shelf . tracks to allow the tray to be adjustable up and down within the designated mo tin cation. An automatic lock will be provided for both the in and out tray positions. a oc trip mechanism will be located at the front of the tray and will be easily operated with a glovedgha The tray(s) will be located upper portion of R 1, D3 above the floor but below adjustable shelves. SLIDE -OUT FLOOR MOUNTED TRAY There will be three (3) floor mounted slide -out trays, . ith \00- es provided R1, P3, D3. Each tray will be rated for up to 5001b in the extended position. tray(s) will be constructed of. 19" aluminum with non - welded corners. The finish will be painter h compartment interior. There will be two undermount - roller bearin s rated at 2501b each provided. The pair of slides will have a safety factor rating of 2. To ensure years of dependable seAar qdes will be coated with a finish that is tested to withstand a minimum of 1,000 hours of salt s. M B 117. To ensure years of easy opertioith des will require no more than a 501b force for push -in or pull- out movement when full od`Ma6dfter having been subjected to a 40 hour vibration (shaker) test under full load. The vi ati dr ,F file will have been generated from accelerometer data collected from a heavy truck chassi even over rough gravel roads in an unloaded condition. Proof of compliance will be provided u on req t. Automatic 1 s ill be provided for both the "in" and 'but positions. The trip mechanism for the locks cated at the front of the tray for ease of use with a gloved hand. DRA R ASSEMBLY A slideout drawer assembly will be installed D3. The clear dimension of the top drawer will be 2.25" with a face plate that is 3.00" high x 21.00" deep. The clear dimension of the second drawer will be 3.75" with a face plate that is 4.00" high x 21.00" deep. The clear dimension of the third drawer will be 3.75" with a faceplate that is 4.00" high x 21.00" 69 of 106 deep. The clear dimension of the fourth drawer will be 4.75 with a face plate that is 5.00 high x 21.00" deep. The clear dimension of the bottom drawer will be 5.75" with a face plate that is 6.00" high x 21.00" deep. The drawers will have a capacity of 250 pounds. The drawers will be mounted in a cabinet housing constructed of light gray powder coated aluAinum with anodized aluminum frames. The housing will be 24.00" deep, and completely enclose th r. A full- length aluminum extruded rail will be provided at the top edge of each drawer. This '1 wi act as the latching mechanism as well as the handle for each drawer. There will be a total of one (1) provided. PARTITION, VERTICAL COMPARTMENT One (1) partition shall be bolted in PI per direction. compartment. RUB RAIL ' Bottom edge of the side compartments will be trimmed with a ' t aluminum extruded rub rail. Trim will be 3.12" high with 1.50" flanges turned out for rigidity. The rub rails will not be an integral part of the b uction, which allows replacement in the event of damage. t a' Rub rails will be attached with bolts an eom the body with isolators that will help to absorb any moderate impact without damaging he d Polished stainless steel fendef cr n ll be provided around the rear wheel openings. A brushed stainle ainted fender liner will be provided to avoid paint chipping. The liners will be removable t i the � aintenance of rear suspension components. A dielectric b 'er wi be provided between the fender crown fasteners (screws) and the fender sheet metal to pre rrosion. The rot wns will be held in place with stainless steel screws that thread directly into a composite nut aectly into the parent body sheet metal to eliminate dissimilar metals contact and greatly redunce for corrosion. HARD SUCTION HOSE PROVIDED BY DEALER NFPA 1901, 2009 edition, section 5.7.2 requires a minimum of 20 ft of suction hose or 15 ft of supply hose. 70 of 106 Hose is not on the apparatus as manufactured. The dealer will provide suction or supply hose. There will be Two (2) lengths of N/A long x 5.00" diameter hose provided and equipped with a NST couplings provided on the ends. The brand will be N /A. HANDRAILS The handrails will be 1.25" diameter anodized aluminum extrusion, with a ribbed design, to ide a positive gripping surface. Chrome plated end stanchions will support the handrail. Plastic gaskets will be used betw en stanchions and any painted surfaces. Drain holes will be provided in the bottom of all vertically mounted handrails.. Handrails will be located on the front of the body in positions needed to i eet F A requirements. o Two (2) vertical handrails will be located at the rear, one on h side of the rear compartment. HANDRAIL AT REAR OF HOSEBED COVER A special full -width handrail will be supplied and ins Ile the rear of the hosebed cover. It will be contoured to the angle of the hosebed cover and s' side. AIR BOTTLE COMPARTMENT .An oxygen cylinder storage compartme 1 • provided. The compartment will be located lower right rear fender. The compartment will be sized xygen bottle with interior dimensions (approximately 5.25" diameter). A vertically bin d r ' a flush mounted pawl latch will be provided to match the air bottle compartment door A quantity of two (2 bottle compartments designed to hold (3) air bottles up to 7.25" in diameter x 26.00" deepAMI be provided on the passenger side forward of the rear wheels and on the passenger side rea rd of r wheels. A polished stainless steel door with a chrome plated flush lift & turn latch will b to contain the air bottle. A dielectric barrier will be provided between the door hinge, hinge steners and the bodv sheet metal. Inside the compartment, black rubber matting will be provided. AIR BOTTLE COMPARTMENT STRAP A strap will be provided in the air bottle compartment(s) to help contain the air bottles when the vehicle is parked on an incline. The strap will wrap around the neck and attach to the wall of the compartment. 71 of 106 AIR BOTTLE STORAGE (DOUBLE) A quantity of one (1) air bottle compartment, 15.25" wide x 7.75" tall x 26.00" deep, will be provided on the driver side forward of the rear wheels . A brushed stainless steel door with a chrome plated flush lift & turn latch will be provided to contain the air bottle. A dielectric barrier will be provided between the door hinge, hinge fasteners and the body sheet metal. Inside the compartment, "W" shaped insert formed of composite materials will be provided. EXTENSION_LADDER There will be a 24', two- section, aluminum, Duo - Safety, Series 900 -A extension ladder pro ROOF LADDER There will be a 14' aluminum, Duo - Safety, Series 775 -A roof ladder provi LADDER STORAGE The ladders will be stored inside the upper section of the driver's ide conartents. This ladder rack will reduce the depth of the upper section in the side compartme t A partition will be installed inside the compartment on the i f the ck to allow for equipment storage and to conceal the ladders. The ladders will be banked in separate storage troug The ladder storage assembly will be fabricated o i less steel track channels to aid in loading and removal of ladders. Rear of the ladder storage area will hav a i ally hinged smooth aluminum door with a D- handle latch to contain the ladders. FOLDING LADDER One (1)10.00' aluminum, 'es 5- , Duo - Safety folding ladder will be installed in a U- shaped trough inside the la ag ompartment. A trough will be provd for storage of two (2) backboards. The trough will be constructed of stainless steel with a t the front of the truck. The trough will be located behind the ladders on the pass 's si f the truck. The interior size of the trough will be 3.00" wide X 17.00" high. X 12'2" long. s will extend down and up, on the outer portion, 3.00" to allow the movement of the front backbo to the rear. A Velcro® strap will be provided at the rear to retain the backboards in the trough. 6' PIKE POLE One (1) pike pole Akron 6' long yellow fiberglass pole with a rubbish hook head, single grip and a "D" handle, will be provided and located ladder compartment. 72 of 106 PIKE POLE.10' One (1) pike pole 10' long DUO Safety with a fiberglass handle will be provided and located ladder compartment. PIKE POLE, 6' One (1) pike pole, 6' long DUO Safety with a fiberglass handle, will be provided and located la der compartment. TRASH HOOK STORAGE There will be one (1) stainless steel U- shaped trough(s) provided for storage of D- handle st t h hook(s). The trough(s) will be installed ladder compartment for the rubbish ho PIKE POLE STORAGE Poly tubing will be used for the storage of two (2) pike poles and will be ca d a er compartment. If the head of a pike pole can come in contact with a painted surface, a stainless scuffplate will be provided. LADDER, TOP ACCESS A wide easy climbing access ladder, constructed of aluminuNins and extruded aluminum rails, will be provided on the right side at the rear of the appara . T climbi ng area of the ladder will be 13.75" wide. The lower section of the ladder will be retractabl "upper section to eliminate interference with the rear FMVSS lights. When lowered the b . Qg will be lower than the body, approximately 16.00" to 20.00" from the ground to allow a e first-step height. The ladder will be slanted when in e y access, and fold against the body for storage to reduce the overall length. Corrosion res. nt, tainless steel spring- loaded locks will hold the ladder in place. Two (2) additional folding s s 11 ocated on the passenger side front bulkhead. The step(s) will be bright finished, non- i rth ack coating. Each step will incorporate an LED light to illuminate the stepping surface he tep an be used as a hand hold with two openings wide enough for a gloved hand. An 0" dee`f 11 width bright aluminum treadplate step will be provided at the rear of the body. PUM Pump 1 be a Pierce, low profile, 1500 gpm single stage midship mounted centrifugal type, mounted below the cab. The pump will have a 15 percent reserve capacity to allow for extended time between pump rebuild. To ensure efficient pump /vehicle design the capacity to weight ratio will not be less than 1.5:1. 73 of 106 The pump casing will consist of three (3) discharge outlets, one (1) to each side in line with the impeller and one (1) to the rear. The pump casing will incorporate two (2) water strippers to maintain radial balance. Pump will be the Class A type. Pump will be certified to deliver the percentage of rated discharge from draft at pressure indi ed below: - 100 percent of rated capacity at 150 psi net pump pressure -70 percent of rated capacity at 200 psi net pump pressure -50 percent of rated capacity at 250 psi net pump pressure The pump will have the capacity to deliver the percentage of rated discharge f a pressurized source as indicated below: - 135 percent of rated capacity at 100 psi net pump pressure om a 5 ource Pump body will be fine- grained gray iron. Pump wi pump housing. The impeller will be high strength vacuum cast a 10 spline stainless steel pump shaft for preci replaceable reverse flow labyrinth type bro impeller will be a twisted vane design t9otfte 'The pump will include o -ring heater /cooling jacket integral to the ° accurately machine balanced and splined to exceptional durability, and efficiency. Double ig design will help to minimize end thrust. The lift. the pump. Deep groove radial type over a earings will be provided. The bearings will be protected at the openings from road dirt a to it an oil seal and a water stinger. A: The pump will a at erned area on the top of the pump intake wye to allow standing for plumbing mainten The main inlet manifold will be 6.00" in diameter and will have a low profile design to facilitate to crosslays and high flows. For of se ' , the pump housing, intake wye, impeller, mechanical seal, and gear case will be acces 'b -0 above the chassis frame by tilting the cab. The intake wyes will be removable without 11 having o remove the main intake casting. Removal of the main inlet wyes will provide access to the impelle , mechanical seal, and wear ring. The tank to pump line and the primary discharge line will be the only piping required to be removed for overhaul. For ease of service and overhaul there will be no piping or manifolding located directly over the pump. 74 of 106 PUMP MOUNTING Pump will be mounted to the chassis frame rails directly below the crew cab, to minimize wheelbase and facilitate service, using rubber isolators in a modified V pattern that include two (2) central mounted isolators located between the frame rails, and one (1) on each side outside the frame rails. The mounting will allow chassis frame rails to flex independently without damage to the fire pump. Each isolator will be 2.55" in total outside diameter and will be rated at 490 lb. The pump will be completely ac ssible by tilting the cab with no piping located directly above the pump. MECHANICAL SEALS Silicon carbide mechanical seals will be provided. The seals will be spring loaded and self a sting. The seals will have a minimum thermal conductivity of 126 W /m *K to rit co ewill have a minimum hardness of 2800 kg/mm2 to be more resistant to wear, and hathe al a ansion characteristics of no more than 4.0 X106mm /mm *K to be more resistant rm ock. PUMP GEARCASE Pump gearcase will be a pressure- lubricated gearcase to cool, lu te, Zd filter the oil. The gearcase will include an auxiliary PTO opening. The gearcase will b constru of lightweight aluminum, and impregnated with resin in accordance to MIL Spec MIL -I -1 A d pstick, accessible by tilting the cab, will be provided for easy fluid level checks. A f er screen ' 1 be provided for long life. The gearcase will consist of two (2) gears to drive th u mpeller and one (1) for the auxiliary PTO. The auxiliary PTO opening will provide for the iti n of PTO driven accessories. The pump will be driven through the rpa ower take -off and clutch. The rear engine power take- offdrive will be live at all times t r pump and roll applications. Rear engine power take - offs allow for high horsepower an ings needed for large pump applications, and is a proven drive system throughout the rug o on industry. CLUTCH' Pierce "Sure Shift Vr will incorporate a heavy -duty electric clutch mounted directly to the front of the pum; a gagd di sengage the pump without gear clash. The clutch will be a multiple disc design for maxi. torque. The clutch will be fully self - adjusting to provide automatic wear compensatio , nd co sistent torque throughout the life of the clutch. Positive engagement and disen agem 11 be provided through a high efficient and dependable magnetic system to assure supe ante. The clutch will have a 500 lb -ft rating. Clutch will be of a time - tested design used i riti al military applications. Pump will provide for both pump and roll mode and stationary pumping mode. Stationary pumping mode will be accomplished by stopping the vehicle, setting the parking brake and engaging the water pump switch on the cab switch panel. The transmission will shift to "Neutral" range 75 of 106 automatically when the parking brake is set. The "OK to Stationary Pump" indicator will also illuminate when the parking brake is set. If the vehicle is equipped with a. foam system or CAFS system, these systems will be engaged from the cab switch panel as well. Pump and roll mode will be accomplished by the use of the main pump and will not require the use of a secondary pump. Pump and roll mode will use the same operation sequence as stationary pum ing mode with a few additional steps. After the vehicle is setup for stationary pumping, the oper o ill leave the cab and set -up the pump panel to discharge at the desired outlet(s). Upon retu ing the ab, the operator will disengage the parking brake. An "OK to Pump & Roll" indicator will inat n the cab switch panel. First gear on the transmission gear selector will be selected by the operato r pump and roll operations. The operator as needed will apply the foot throttle. Pump I ode will be maintained unless the transmission shifts out of first gear. Stopping either stationary pumping mode or pump and roll mode will be cco p 'shed by pressing the "Water Pump" switch down to disengage the pump. PUMP SHIFT Pump will be engaged in not more than two steps, by simpl ting th parking brake, which will automatically put the transmission into neutral, and activating a er switch in the cab. Switches in the cab will also allow for water, foam, or CAFS if e ed, an activate the appropriate system to preset parameters. The engagement will provide sim : le step operation, enhance reliability, and completely eliminate gear clash. The shift will i indicator lights as mandated by NFPA. A direct override switch will be located behind wd the lower pump operator's panel. The switch will automatically disengage when the door is cl As the parking brake is applied, the %pa el throttle will be activated and deactivate the chassis foot throttle for stationary operation. Pump and roll operation will e i by releasing the parking brake with the pump in the pumping mode. Releasing the par, 1 activate the chassis foot throttle, and deactivate the pump panel throttle. To prot ental pump overheating, the pump will automatically disengage when the truck transmission s into second gear. up is not required as transmission will automatically shift to neutral as soon as the set. A supplementary heat exchange cooling system will be provided to allow the use of water from the discharge side of the pump for cooling the engine water. A water -to- coolant heat exchanger will be used. 76 of 106 INTAKE RELIEF VALVE An Akron relief valve will be installed on the suction side of the pump preset at 125 psig. Relief valve will have a working range of 75 psig to 200 psig. Outlet will terminate below the frame rails with a 2.50" National Standard hose thread adapter and will have a "do not cap" warning tag. Control will be located behind an access door at the right (passenger's) side pump panel. PRESSURE CONTROLLER A Pierce Pressure Governor will be provided. An electric pressure governor w" rided which is capable of automatically maintaining a desired preset discharge pressure in the ate ump. When operating in the pressure control mode, the system will automatically ma' th ' harge pressure set by the operator (within the discharge capabilities of the pump and water supply gardless of flow, within the discharge capacities of the water pump and water supp A pressure transducer will be installed in the water discharg of the The transducer continuously monitors pump pressure sending a signal to the Electronic o of Mo y e (ECM). The—governor can be used in two (2) modes of operat RPM mode and pressure modes. In the RPM mode, the governor can be activated a h" a parking brake has been set. When in this mode, the governor will maintain the set engine ed regardless of engine load (within engine operation capabilities). In the pressure mode, the governor sy m my operate after the fire pump has been engaged and the vehicle parking brake has been m the pressure mode, the pressure controller monitors the pump pressure and varies engine ed o maintain a precise pump pressure. The pressure controller will use a quicker reacting J a e for engine control. A preset feature all ede rmined pressure or rpm to be set. A pump cavitation tection feature is also provided which will return the engine to idle should the pump cavitate. Cavit n is sensed by the combination of pump pressure below 30 psi and engine speed abov rpm for more than five (5) seconds. The t be a vernier style control, with a large control knob for use with a gloved hand. A throttl ady light will be provided adjacent to the throttle control. A large 0.75" RPM display will be provid to be visible at a glance. Check engine, and stop engine indicator lights will be provided for easy viewing. Large 0.75" push buttons will be provided for menu, mode, preset, and silence selections. The water tank level indicator will be incorporated in the pressure governor. 77 of 106 A fuel level indicator will be incorporated in the pressure controller. A pump hour meter will be incorporated in the pressure controller. The pressure controller will incorporate monitoring for engine temperature, oil pressure, fuel level alarm, and voltage. Pump monitoring will include, pump gearcase temperature, error codes, diagnostic data, pump service reminders, and time stamped data logging, to allow for fast accurate troub shooting. It will also notify the driver /engineer of any problems with the engine and the app Complete understandable messages will be provided in a 20- character display, providin r fewe abbreviations in the messages. An automatic dim feature will be included for night operati The pressure controller will include a USB port for easy software upgrades, w c <l3e downloaded through a USB memory stick, eliminating the need for a laptop for softwa s ati s. A complete interactive manual will be provided with the pressure control PRIMING PUMP The priming pump will be a Trident Emergency Products co presse . powered, high efficiency, multistage venturi based AirPrime System, conforming to s a rds o lined in the current edition of NFPA 1901. All wetted metallic parts of the priming system are to a rass and stainless steel construction. One (1) priming control will open the priming v adi start the pump primer. A 0.50" diameter recirculating line, fro th Nhp to the water tank, will be furnished with a control installed at the pump operator's co . A check valve will be provided in this line to prevent the back flow of water from the tan the ump if the valve is left in the open position. PUMP.MANUALS There will be a to (2 ump manuals provided by the pump manufacturer and furnished with the apparatus. ual ill be provided by the pump manufacturer in the form of two (2) CDs. Each manual will c ump operation, maintenance, and parts. PLUMBIN All i Vnd la t pl umbing, 3.00" and smaller, will be plumbed with either stainless steel pipe or synter hose reinforced with high - tensile polyester braid. Small diameter secondary plumbing such n lines will be stainless steel, brass or hose. Where vibration or chassis flexing may damage or loosen piping or where a coupling is required for servicing, the piping will be equipped with victaulic or rubber couplings. Plumbing manifold bodies will be ductile cast iron or stainless steel. 78 of 106 All lines will drain through a master drain valve or will be equipped with individual drain valves. All individual drain lines for discharges will be extended with a hose to drain below the chassis frame. All water carrying gauge lines will be of flexible polypropylene tubing. MAIN PUMP INLETS A 6.00" pump manifold inlet will be provided on each side of the vehicle. The suction inlets 1 include removable die cast zinc screens that are designed to provide cathodic protection for th thus reducing corrosion in the pump. Main pump inlets will not be located on the main operator's panel and will maintain a to co ection height by terminating below the top of the chassis frame rail. INLET BUTTERFLY VALVE One (1) butterfly valve will be provided on the passenger's side main pump in t The 6.00" inlet valve will be provided with a built -in, adjustable surlief valve and a 3/4" bleeder valve will be provided on the inlet side of the valve. The valve will be electrically operated with an Elkhart U2F ele c valve actuator. An Elkhart UBEC 1 valve controller with LED indicator lights will be pr � ge ed at the pump operator's panel. An additional UBEC 1 valve controller will be provided at the passe ide pump panel. The electric actuator will be furnished with a ma JOV NW bAl aver ride, accessible from the pump panel. A wrench will be provide to manually open or aloe. INLET BUTTERFLY VALVE One (1) butterfly valve will be pr The 6.00" inlet valve will be valve will be provided on bt The valve will 1 valve controller driver's side main pump inlet. 1 a built -in, adjustable pressure relief valve and a 3/4" bleeder the valve. with an Elkhart U217 electric valve actuator. An Elkhart UBECI ED indicator lights will be provided at the pump operator's panel. The electric ^iator hill be furnished with a manual over ride, accessible from the pump panel. A wrench will 11 Vp vide to manually open or close the valve. VAL All bal Ives will be Akron® Brass. The Akron valves will be the 8000 series heavy -duty style with a stainless steel ball and a simple two -seat design. No lubrication or regular maintenance is required on the valve. Valves will have a ten (10) year warranty. 79 of 106 LEFT SIDE INLET There will be one (1) auxiliary inlet with a 2.50" valve at the left side pump panel, terminating with a 2.50" (F) National Standard hose thread adapter. The auxiliary inlet will be provided with a strainer, chrome swivel and plug. RIGHT SIDE INLET AO There will be one (1) auxiliary inlet with a 2.50" valve at the right side pump panel, terminate a 2.50" (F) National Standard hose thread adapter. The auxiliary inlet will be provided with a strainer, chrome swivel and plug. The location of the valve for the two (2) inlets will be recessed behind the pum an ADAPTER, INLET Two (2) adapters for the inlets will be furnished for the main pump inlet(s) wi .00" female NST threads converting to 5.00" Storz swivel Task Force Tips AA3H , -NX. A 5.00" Storz cap will be provided to match the adapter. .ANODE, INLET . A pair of sacrificial zinc anodes will be provided in td6ater pu p inlets to protect the pump from INLET CONTROL The side auxiliary inlet(s) will incorporate a u Qrn ball valve with the control located at the inlet valve. The valve operating mechanism ' i to the position of the valve. INLET BLEEDER VALVE A 0.75" bleeder valve will be pr ed or each side gated inlet. The valves will be located behind the panel with a swing style han e t e tended to the outside of the panel. The handles will be chrome plated and provide a vi s on f valve position. The swing handle will provide an ergonomic position for opera ' e ve without twisting the wrist and provides excellent leverage. The water discharged by t e ers ill be routed below the chassis frame rails. The booster ill be connected to the intake side of the pump with heavy duty 4.00" piping and a quart ' full flow line valve with the control located at the operator's panel. A rubber coupling will b ' O ed in this line to prevent damage from vibration or chassis flexing. A check valve will be provided in the tank to pump supply line to prevent the possibility of "back filling" the water tank. TANK REFILL A 1.50" combination tank refill and pump re- circulation line will be provided, using a quarter -turn full flow ball valve controlled from the pump operator's panel. 80 of 106 LEFT SIDE DISCHARGE OUTLETS There will be two (2) discharges with a 2.50" valves on the left side of the apparatus, terminating with a 2.50" (M) National Standard hose thread adapter. Discharges will be located below the cab, and will be no higher than the top of the chassis frame rail. Discharges will not be located on the pump operator's panel. Lever controls will be provided at the valve. RIGHT SIDE DISCHARGE OUTLETS There will be two (2) discharges with a2.50" valve on the right side of the apparatus, to ina rig th a male 2.50" National Standard hose thread adapter. The discharges will be located belo cre ab, and will be no higher than the top of the chassis frame rail. There will be an Akron® 9325 Navigator Pro electric valve controller provide t t ump panel. The controller unit will be of true position feedback design, requiring no clutnan for or current limiting. The controller will be completely sealed with two (2) button op c se va lve position capability and a full color LCD display with backlight. In addition to vaion, each controller will include a pressure display. FRONT DISCHARGE OUTLET There will be one (1) 1.50" discharge outlet piped to the front o apparatus and located in the center bumper tray. Plumbing will consist of 2.00" piping and flodeai a 2.00" ball valve with control at the pump operator's panel. A fabricated weldment maless steel pipe will be used in the plumbing where appropriate. The piping will terminate with T with 90 degree stainless steel swivel. There will be Class 1 automatic drains rov ow points of the piping. REVERSE LINKAGE ON FRQ T UTLET(S) The valve control for the fro on the pump panel will be "in" when the valve is open and "out" when the valve is closed. rev rse nkage will be provided for one (1) front outlet(s) located front outlet. be ne (1) 'scharge outlet piped to the rear of the hose bed on passenger's side,installed so proper clear provided for spanner wrenches or adapters. Plumbing will consist of 2.50" piping alon ' a 2. ' full flow ball valve with the control from the pump operator's panel. Discharge will termi- 2.50" NST thread. Discharge piping will be schedule 10 304L welded or formed stainle teel and routed through the water tank. REAR DISCHARGE OUTLET There will be one (1) discharge outlet piped to the rear of the hose bed, on driver's side, installed so proper clearance is provided for spanner wrenches or adapters. Plumbing will consist of 2.50" piping along with a 2.50" full flow ball valve with the control from the pump operator's panel. Discharge will 81 of 106 terminate with 2.50" NST thread. Discharge piping will be schedule 10 304L welded or formed stainless steel and routed through the water tank. HOSE BED DISCHARGE OUTLET There will be one (1) discharge outlet piped to the front of the hose bed, in the driver side bed. Plumbing will consist of 2.50" schedule 10 304L welded or formed stainless steel piping along with a 2.50" full flow ball valve with the control from the pump operator's panel. Discharge will to I i e with 2.50" NST thread. DISCHARGE CAPS Chrome plated, rocker lug, caps with chains will be furnished for all side disch outl ' The caps will be the Pierce VLH, which incorporates an exclusive thread au matically relieve stored pressure in the line when disconnected. OUTLET.BLEEDERS A .75" bleeder valve will be provided for each outlet 1.50" or lar The valves will be located behind the panel with a swine st ndle ontrol extended to the outside of the side pump panel. The handles will be chrome pla d with vi 1 indication of valve position. The swing handle will provide an ergonomic position for o ting the valve without twisting the wrist and provides excellent leverage. Bleeders will be located t th ottom of the pump panel. They will be properly labeled identifying the discharge they d in to. The water discharged by the bleeders will be routed below the chassis frame rails. This will include the deluge riser plum ' d a front outlet to be provided with manual operating drains. REAR OUTLET ELBOWS The 2.50" discharge outlets 1 cat at rear of the apparatus will be furnished with a 2.50" (F) National Standard h e ea .50" (M) National Standard hose thread, chrome plated, 45 degree elbow. The elbow will be Pi VLH, which incorporates an exclusive thread design to automatically relieve stored press i the ine when disconnected. ADMIONA AR OUTLET ELBOWS two (2 Esc arge outlets 2.50" discharge outlets, located at the rear of the apparatus, will be furnished' with a 0" (F) National Standard hose thread x 2.50" (M) National Standard hose thread, chrome plated, 45 degree elbow. The elbow will be the Pierce VLH, which incorporates an exclusive thread design to automatically relieve stored pressure in the line when disconnected. 82 of 106 DISCHARGE DRAIN VALVES Provide a manual style drain in all low plumbing points that would normally have automatic drains. DISCHARGE OUTLET CONTROLS The discharge outlets will incorporate a quarter -turn ball valve with the control located at the pump operator's panel. The valve operating mechanism will indicate the position of the valve or an itidicator will be provided to show when the valve is closed. The passenger side discharges will be controlled by an Akron 9325 Navigator Pro electr, aloe controllers with the manual override located on the passenger side pump panel. The contro nit will be of true position feedback design, requiring no clutches in the motor or cur itir. Th controller will be completely sealed with two (2) button open and close valve position ca bil and a full color LCD display with backlight. In addition to valve position, each controlle i d a pressure display. All other outlets will have manual swing handles that operate in ertic p nd down motion. These handles will be able to lock in place to prevent valve creep under pr ure. DELUGE RISER A 3.00" deluge riser will be installed above the pum such a nner that a monitor can be mounted and used effectively. Piping will be installed securel movement develops when the line is charged. The riser will be gated and controlled at the operator's panel. A 2.50" valve will be provided.The deluge riser will allow flow for 10 G M. TELESCOPIC PIPING The deluge riser piping will include a 1 .0 sk Force Model XG18 Extend -A -Gun extension. This extension will be telescopic al the deluge gun to be raised 18.00" increasing the range of operation. A triangular bracingr ure be installed to support the piping. Aluminum tread plate will be placed on the fo de`r,f-the bracing structure. A position sensor wi a provided on the telescopic piping that will activate the "do not move vehicle" light inside #cab when the monitor is in the raised position. The ,is xtend -a -Gun will have provisions for direct mountings Task Force CrossFire Two (2) crosslays with 1.50" outlets will be provided. Each bed to be capable of carrying 200 feet of 1.75" double jacketed hose and will be plumbed with 2.00" i.d. schedule 10 304L welded or formed stainless steel pipe and gated with a 2.00" quarter turn ball valve. Threaded pipe will not be acceptable. 83 of 106 Crosslays will be low mounted with the bottom of both crosslay trays no more than 11.00" above the frame rails for simple, safe reloading and deployment. Outlets to be equipped with a 1.50" National Standard hose thread 90- degree swivel located in the hose bed so that hose may be removed from either side of apparatus. The crosslay controls will be at the pump operator's panel. A removable tray will be provided for the crosslay hosebed. The crosslay tray will' be c strutted qY black poly to provide a lightweight sturdy tray. Two (2) hand holes will be in the floor an diti nal hand holes will be provided in the sides for easy removal and installation from the comp t. The floor of the trays will be perforated to allow for drainage and hose drying. Tra s held in place by a mechanical spring loaded stainless steel latch that automatically deploys adi the trays to hold the trays in place during transit. ROLL -UP DOOR, CROSSLAY ENDS h, 44P V All compartment doors will be roll -up style double faced, alumi u onstruction, painted one (1) color to match the lower portion of the body and manufactured by 413 O The track will be the flanged track with the screws in &ailed to threar of the track guide. The slats will be double wall box frame extrusion. surface will be concave to help loose equipment Between each slat will be a PVC inner seal moisture from entering the compartmentsq surface will be flat and the interior A and prevent it from jamming the door. metal to metal contact and prevent dirt or Each door will have a 4.00" counte o assist in lifting. A stainless steel lift bar to be a or opening the door and located at the bottom of each door with latches on the outer extrus' do, r frame. A ledge to be supplied over lift bar for additional area to aid in closing th har will be located at the bottom of door with striker latches installed at the base ofth. a am . Side frame mounted door strikers will include support beneath the stainless steel lift b revent door curtain bounce, improve bottom seal life expectancy and to avoid false door aiwignals. Two ) ays, without plumbing, will be provided above the pump compartment capable of carrying 100' o .75" hose with gated wye and nozzle. The deadlays will be located directly above the 1.50" crosslays. Two (2) removable trays will be provided for the deadlay hosebed. The trays will measure 6.50" wide x 8.00" high. The deadlay tray will be constructed of black poly to provide a lightweight sturdy tray.Two (2) hand holes will be in the floor and additional hand holes will be provided in the sides for easy 84 of 106 removal and installation from the compartment. The floor of the trays will be perforated to allow for drainage and hose drying. Trays will be held in place by a mechanical spring loaded stainless steel latch that automatically deploys upon loading the tray to hold the trays in place during transit: CROSSLAY OPENING SCUFFPLATE Polished stainless steel scuffplates will be provided on the lower horizontal edges of the crosSlaY openings. HUSKY 3 FOAM PROPORTIONER A Pierce Husky® 3 foam proportioning system will be provided. The Husky 3 is an on de , automatic proportioning, single point, direct injection system suitable for all typ f C s A and B foam concentrates, including the high viscosity (6000 cps), alcohol resistant Cl s ams. Operation will be based on direct measurement of water flow, and remain consisten i ecified flows and pressures. The system will automatically proportion foam solution at rates from g percent to 3.0 percent regardless of variations in water pressure and flow, up to the maxi unated capacity of the foam concentrate pump. The design of the system will allow operation from draft, h nt, oNray operation. SYSTEM CAPACITY The system will have the ability to deliver the followi nimum foam, solution flow rates at accuracies that meet or exceed NFPA requirements at a pum 150 psi. 100 gpm @ 3 percent 300 gpm @ 1 percent 600 gpm @ 0.5 percent 0 Class A foam setting in .1 pQen ents from .1 percent to l percent. Typical settings of I percent, .5 percent and .3 percenti fli c pacity shall be limited to the plumbing and water pump capacity). CONTROL S The system will be i ped with a digital electronic control display located on the pump operators panel. Push tton c trols will be integrated into the panel to turn the system on /off, control the foam percentage, set the operation modes. The p O_Q injection will have a preset. This preset can be changed at the fire department as desired. The pelynt of injection will be able to be easily changed at the scene to adjust to changing demands. Three (3) .50 tall LEDs will display the foam percentage in numeric characters. Three (3) indicator LEDs will also be included: one (1) green, one (1) red, and one (1) yellow. The LEDs will indicate various system operation or error states. The indications will be: 85 of 106 Solid Green - System On Solid Red - Valve Position Error Solid Yellow - Priming System Flashing Green - Injecting Foam Flashing Red - Low Tank Level Flashing Yellow - Refilling Tank The control display will house a microprocessor, which receives input from th s ater flow meter while also monitoring the position of the foam concentrate pump. T op cessor will compare the values of the water flow versus the position /rate of the foam u , to sure the proportion rate is accurate. One (1) check valve will be installed .in the plumbing to prev oam from contaminating the water pump. HYDRAULIC DRIVE SYSTEM The foam concentrate pump will be powered by an electric ov ydraulic drive system. The hydraulic op system and motor will be integrated into one unit. FOAM CONCENTRATE PUMP The foam concentrate pump will be of positive d' nt, self - priming; linear actuated design, driven by the hydraulic system. The pump w'R structed of brass body; chrome plated stainless steel shaft, with a stainless steel piston. In o increase longevity of the pump, no aluminum will be present in its construction. A relief system will be provided is s designed to protect the drive system components and prevent over pressuring the foam con 6a mp. The foam concentrate p p ve minimum capacity for 3 gpm with all types of foam concentrates with a viscosity or to 000 cps including protein, fluoroprotein, AFFF, FFFP, or AR -AFFF. The system will delive y the amount of foam concentrate flow required, without recirculating foam back to the storage tank. irculating foam concentrate back to the storage tank can cause agitation and premature %a,_1 . ' of the concentrate, which can result in system failure. The foam concentrate pump will if -prig and have the ability to draw foam concentrate from external supplies such as drums or oai . An external foam pick -up will be provided to enable use of a foam agent that is not stored on the vehicle. The external foam pick -up will be designed to allow continued operation after the on -board foam tank is empty, or the use of foam different than the foam in the foam tank. 86 of 106 PANEL- MOUNTED EXTERNAL PICK -UP CONNECTION / VALVE A bronze three (3) -way valve will be provided. The unit will be mounted to the pump panel. The valve unit will function as the foam system tank to pump valve and external suction valve. The external foam pick -up will be one (1) .75" male connection GHT (garden hose thread) with a cap. PICK- UP_.HOSE A.75" flexible hose with an end for insertion into foam containers will be provided. The hos be supplied with a.75" female swivel GHT (garden hose thread) swivel connector. The hoe wil e shipped loose. DISCHARGES The foam system will be plumbed to the center of front bumper, front of hose I ide, left rear outlet and right rear outlet. SYSTEM ELECTRICAL LOAD The maximum current draw of the electric motor and system will no rpfre Xan 55 amperes at 12 VDC. SINGLE FOAM TANK REFILL The foam system's proportioning pump will be used . ill the fo tank. This will allow use of the auxiliary foam pick -up to pump the foam from pails um on the ground into the foam tank. A foam shutoff switch will be installed in the fill d tank to shut the system down when the tank is full.. The fill operation will be controlled by a d in the foam system controller. While the proportioner pump is filling the tank, the co ill display a flashing yellow LED to indicate that the tank is filling. When the tank is full a ined by the float switch in the tank dome, the pump will stop and the controller will shut th ell LED off. If it attempted to use tank fill and the refill valve and suction valve are in the position(s), then a red LED will illuminate to indicate the. improper valve position(s). W '40 aIves are positioned properly, then filling will commence. The fire department will ire apparatus with a foam system. A demonstration will be provided at the rimanufactur th eration of the foam system. This demonstration ' 'nclude: - A hands o system start-up and discharge session.. - The a ration will be done with foam to simulate real conditions. FOA ANK The foam tank will be an integral portion of the polypropylene water tank. The cell will have a capacity of 20 gallons of foam with the intended use of Class A foam. The brand of foam stored in this tank will be 3M. The foam cell will reduce the capacity of the water tank. The foam cell will have a screen in the fill dome and a breather in the lid. 87 of 106 FOAM TANK DRAIN A system of 1.00" foam tank drains will be provided, integrated into the foam systems strainer and tank to foam pump valve management system.The tank to pump hoses running from the tank(s) to the panel mounted strainer will 1.00" diameter.The foam system controller will have a mode that allows for a given foam valve to be opened at will. Flow of foam from the tank valve to the strainer will be usable as a tank drain mode. An adaptor will be supplied, that allows the 1.00" foam intake screen to assembly to be ed . a dr in outlet. The standard supplied 1.00" foam pick up hose will be attached to the screen as e y b ay of the adapter. The drain mode will allow the operator to open and close the tank valve as requ from the control head, to drain foam and re -fill foam containers through the connect e, rthout foam spillage beneath the vehicle. PUMP CONTROL- PANELS (LEFT SIDE CONTROL) Pump controls and gauges will be located midship at the left (driver's) sid f apparatus and properly identified. The main pump operator's control panel will be completely osed a located in the forward section of the body compartment, to protect against road debris and we elements. The pump operator's panels will be no more than 31.00" wide, and made i ur (4) sections with the center section easily removable with simple hand tools. For the safety of e p p operator, there will be no discharge outlets or pump inlets located on the main pump i r panel. Layout of the pump control panel will be er o ly efficient and systematically organized. The upper section will contain the master ga section will be angled down for easy visibility. The center section will contain the pump co rols ligned in two horizontal rows. The pressure control device; engine monitoring gauge ;ca switches, and foam controls (if applicable) will be located on or adjacent to the center pa side walls for easy operation and visibility. The lower section will contain the outlet drains Manual controls a oving 8" long lever style controls that operate in a vertical, up and down swing motion. h andles will have a 2.25" diameter knob and be able to lock in place to prevent valve creep under an. essure. Bright finish bezels will encompass the opening, be securely mounted to the pump o 's panel, and will incorporate the discharge gauge bezel. Bezels will be bolted to.the pane . r easy oval and gauge service. The driver's side discharges will be controlled directly at the valve. ill be no push -pull style control handles. Identifi lion tags for the discharge controls will be recessed within the same bezel. The discharge identification tags will be color coded, with each discharge having its own unique color. All remaining identification tags will be mounted on the pump panel in chrome - plated bezels. All discharge outlets will be color coded and labeled to correspond with the discharge identification tag. 88 of 106 The pump panels for the midship discharge and intake ports will be located ahead of the body compartments with no side discharge or intake higher than the frame rail. The pump panels will be easily removable with simple hand tools. A recessed cargo area will be provided at the front of the body, ahead of the water tank above the plumbing. PUMP PANEL CONFIGURATION The pump panel configuration will be arranged and installed in an organized manner thoNill prod e user - friendly operation. PUMP AND-GAUGE-PANEL The pump operator's panel and gauge panels will be constructed of stainle to it a brushed finish. The side control panels will be constructed of stainless steel with a brushed fi is for durability and ease of maintenance. PUMP AND PLUMBING ACCESS Simple access to the plumbing will be provided through the t of th body area by raising the cab for complete plumbing service and valve maintenance. cess to v s will not require removal of operator panels or pump panels. Access for rebuildin the pump will not require removal of more than the tank to pump line and a single discharge line Th ccess will allow for fast, easy valve or pump rebuilding, making for reduced out of serv' i Steps will be provided for access to the top of the pump. Access to the pump will be provided by gst a cab. The pump will be positioned such that all maintenance and overhaul work ca f ed above the frame and under the tilted cab. The service and overhaul work on the pump 1 n require the removal of operator panels or pump panels. Complete pump casing and g moval will require no more than removal of the intake and discharge manifolds, driv co ler d a single discharge line. The pump case and gear case will be able to be remove i upward without interference from piping and be removable in less than 3 hours. There will bt (1) Truck -Lite, Model 44308C 4.00" white LED light(s) with Model 40700 grommet prow nsid� a pump enclosure for pump compartment lighting. The li t(s) will be controlled by a switch located on pump panel with the light in the center of Engine monitoring graduated LED indicators will be incorporated with the pressure controller. 89 of 106 AIR HORN SWITCH An air horn control switch will be provided at the pump operator's control panel. This switch will. be red and properly labeled. The button will be located within easy reach of the operator in the electrical switch panel. VACUUM AND PRESSURE GAUGES The pump'vacuum and pressure gauges will be liquid filled and manufactured by Class 1 Inc led The gauges will be a minimum of 4.50" in diameter and will have white faces with black le g, with a pressure range of 30.00"-0-600#. The pump pressure and vacuum gauges will be installed adjacent to each o r e mp operator's control panel. Test port connections will be provided at the pump operator's pan 1. One a connected to the intake side of the pump, and the other to the discharge manifold of the u They will have 0.25 in. standard pipe thread connections and polished stainless steel plugs. NI arked with a label. PRESSURE-GAUGES The individual "line" pressure gauges for the discharg ill be interlube filled and manufactured by Class 1C. The gauges will be a minimum of 3.00" in diam<r Od will have white faces with black lettering. Gauge construction will include a Zytel n with adhesive mounting gasket and threaded retaining nut. IWAVOI Gauges will have a pressure rang f 3 ' -0 -400 #. The individual pressure g wil be stalled as close to the outlet control as practical. This gauge will i u a ear warranty against leakage, pointer defect, and defective bourdon tube. WATER LEVEL E An electric wAer leve gauge will be incorporated in the pressure controller that registers water level by in of nin LEDs. They will be at 1/8 level increments with a tank empty LED. The LEDs will be a e that is readable in sunlight, and have a full 180 - degree of clear viewing. To furl r alert the pump operator, the gauge will have a warning flash when the tank volume is less than 25 percent, and will have down chasing LEDs when the tank is almost empty. The level measurement will be ascertained by sensing the head pressure of the fluid in the tank or cell. 90 of 106 MINI SLAVE UNIT An electric water level gauge will be provided in the cab that registers water level by means of five (5) LEDs. They will be at 1/4 level increments with a tank empty LED. The LEDs will be a bright type that is readable in sunlight, and have a full 180- degree of clear viewing. The water level gauge in the cab will be activated when the pump is in gear. WATER LEVEL GAUGE There will be two (2) additional water level indicator, Whelen®, Model PSTANK, LE dule installed one (1) each side rearward of crew cab doors. This light module will include four (4) colored levels, and function similar to t e rdt"evel indicator located at the operators panel: • First green module indicates a full water level • Second blue module indicates a water level above 3/4 full • Third amber module indicates a water level above 1/2 ful • Last red module indicates a water level above 1/4 f d emp • Above 1/4 this light will be steady burning • At empty this light will be flashing This module will be activated when the pump is C FOAM LEVEL GAUGE An electric foam level gauge will be provid he operator's panel, that registers foam level by means of nine (9) LEDs. They will be at 1/8 I ve c mens with a tank empty LED. The LEDs will be a bright type that is readable in sunli ve a full 180 degree of clear viewing. To further alert the pump percent, and will have Dc a warning flash when the tank volume is less than 25 when the tank is almost empty. The level measur a wi ascertained by sensing the head pressure of the fluid in the tank or cell. This method prove accuracy with an array of multiviscosity foams. SIDE CONTROL PI7MP OPERATOR'S/PUMP PANEL LIGHTING Illu ination Ve provided for controls, switches, essential instructions, gauges, and instruments neces r he operation of the apparatus and the equipment provided on it. External illumination will b mum of five (5) foot - candles on the face of the device. Internal illumination will be a miniur (4) footiamberts. The pump panels will be illuminated by four (4) Truck -Lite, Model 6060C white LED lights installed on the back of the cab, two (2) on the driver's side and two (2) on the passenger's side. 91 of 106 The pump operator's panel will utilize the same LED strip lighting at the forward doorframe as all other compartment lighting. There will be a small white LED pump engaged indicator light installed overhead. MICROPHONE & SPEAKER COMPARTMENT A microphone and speaker compartment will be furnished adjacent to the pump operator's pa in the center compartment divider. Compartment size will be 12.00" high x 8.00" wide x 6.00" dee AIR HORN SYSTEM One (1) Grover air horn will be recessed in the front bumper. The air horn system will \1p)iip to the air brake system wet tank utilizing 0.38" tubing. A pressure protection valve 11 alled to prevent the loss of air, in the brake system. Air Horn Location The air horn will be located on the left side of the bumper, just ou side of e me rail. AIR HORN CONTROL The air horns will be actuated by two (2) foot switches, one ocate on the officer's side and one (1) on the driver's side. ELECTRONIC SIREN A Wheleng, Model 295SLSAl, electronic siren ' canceling microphone will be provided. This siren to be active when the battery swit d that emergency master switch is on. Electronic siren head will be located in e r console. SIREN CONTROL The electronic siren will be c ta)II;o7 e siren head and horn ring only. No foot switches will be required. The driver will h e _ o ' n to control the siren or the chassis horns from the horn button by means of a selector switch I N on'the instrument panel. SPEAKER The r will b On (l) speaker provided. Each speaker will be a Whelen ®, Model SA3151', black nylon comp -watt, with through bumper mounting brackets and polished stainless steel grille. Each speake will be connected to the siren amplifier. The speaker(s) will be recessed in the front bumper on the passenger's side. AUXILIARY MECHANICAL_SIREN There will be one (1) Federal, Model Q213, mechanical siren furnished. A siren brake button will be installed on the switch panel. 92 of 106 The control solenoid will be powered up after the emergency master switch is activated and will be interlocked to the parking brake so that the siren cannot be accidentally activated when the parking brake is applied. The mechanical siren will be recessed in the front bumper on the left side. The siren will be properly supported using the bumper framework. The mechanical siren will be actuated by a foot switch located on the officer's side. A second siren brake switch will be installed on the passenger side. FRONT ZONE UPPER WARNING LIGHTS There will be one (1) 81.00" Whelen Freedom IV LED lightbar mounted on th ab f. The lightbar will include the following: • One (1) red flashing LED module in the driver's side end sitio • One (1) red flashing LED module in the driver's side front c er position. • One (1) red flashing LED module in the driver's sid t front osition. • One (1) red flashing LED module in the drive 's side sec front position. • One (1) red flashing LED module in the driver We thin front position. • One (1) red flashing LED module in the drive ' si fourth front position. • One (1) red flashing LED module in the r' de fifth front position. • One (1) red flashing LED module in s side sixth front position. • One (1) 795 LED traffic light co s to national standard high priority in the center positions. • One (1) red flashing LED j^Wthe passenger's side sixth front position. • One (1) red flashing LE a in the passenger's side fifth front position. • One (1) red flashin ED o e in the passenger's side fourth front position. • One (1) red L module in the passenger's side third front position. • One (1) fla in D module in the passenger's side second front position. • One (1) red ping LED module in the passenger's side first front position. • One red fl ing LED module in the passenger's side front corner position. • One flashing LED module in the passenger's side end position. There ` clean lenses.. The fol wing switches may be a installed in the cab on the switch panel to control the lightbar: • a switch to control the flashing LED modules. • the traffic light controller by a cab switch without emergency master control. • no momentary switch to activate the traffic light controller. 93 of 106 The traffic light controller will be disabled when the parking brake is applied. The 12 red flashing LED modules in the front positions may be load managed when the parking brake is applied. CAB FACE WARNING LIGHTS There will be four (4) Whelen ®, Model M6 *C, LED flashing warning lights installed on the QA face, above the headlights, mounted in a common bezel. • The driver's side front outside warning light to be red • The driver's side front inside warning light to be red • The passenger's side front inside warning light to be red • The passenger's side front outside warning light to be red All four (4) lights will include a clear lens. There will be a switch located in the cab, on the switch panel, to rol a four (4) lights. The inside lights may be load managed if colored or disabl white, hen the parking brake is set. HEADLIGHT FLASHER The high beam headlights will flash alternately betw4ehWeft and right side. There will be a switch installed in the cab on the switch will be live when the battery switch ^t The flashing will automatically cancel parking brake is set. AM There will. be six (6) to control the high beam flash. This master switches are on. -beam headlight switch is activated or when the LED flashing warning lights with Model 6EFLANGE, chrome flanges to a owing positions: • Two (2) li one 1) each side on the bumper extension o The si ont lights to be red • Two ' hts, one (1) each side of cab rearward of crew cab doors o e side middle lights to be red • ) lights, one (1) each side above rear wheels o The side rear lights to be red All six (6) lights will include a clear lens. There will be a switch, located in the cab on the switch panel to control the lights. 94 of 106 REAR ZONE LOWER LIGHTING There shall be two (2) Whelen®, Model M6 *C, LED flashing warning lights located at the rear of the apparatus. • The driver's side rear light to be red • The passenger's side rear light to be red Both lights will include a lens that is clear. There will be a.switch located in the cab on the switch panel to control the lights. REAR UPPER ZONE WARNING LIGHTS There will be two (2) Whelen, Model MCFLED2* LED warning beacons prov d a he rear of the truck, one (1) each side. The color of the lights will be: • The rear upper light(s) on the driver's side to be red. • The rear upper light(s) on the passenger's side to be All lenses will be clear. There will be a switch located in the cab on the switc an to control the beacons. Ab The rear warning lights will be mounted on t with all wiring totally enclosed. The rear deck lights will be mounted on the ails as high as possible. TRAFFIC DIRECTING LIGHkh There will be one (1) Wheleng, Pof 5, 36.01" long x 2.84" high x 2.24" deep, amber LED traffic directing light installed e apparatus. The Whelen, Model TAIL. fip6ntr6l head will be included with this installation. The auxiliary w. ' od ill be activated with the control head only. This traffic dijecting limit will be recessed within a treadplate step at the rear of the apparatus The ffic d rec -1y"fig light control head will be located in the driver side overhead switch panel in the right tion. The following equipment will be furnished with the completed unit: - Three (3) bags of chrome, stainless steel, or cadmium plated screws, nuts, bolts and washers, as used in the construction of the unit. 95 of 106 NFPA REQUIRED LOOSE EQUIPMENT,PROVIDED BY FIRE DEPARTMENT The following loose equipment as outlined in NFPA 1901, 2009 edition, section 5.8.2 and 5.8.3 will be provided by the fire department. All loose equipment will be installed on the apparatus before placed in emergency service, unless the fire department waives NFPA .section 4.21. • 800 ft (60 m) of 2.50" (65 mm) or larger fire hose. • 400 ft (120 m) of 450" (38 mm), 1.75" (45 mm), or 2.00" (52 mm) fire hose. • One (1) handline nozzle, 200 gpm (750 L /min) minimum. r • Two (2) handline nozzles, 95 gpm (360 L /min) minimum. • One (1) playpipe with shutoff and 1.00" (25 mm), .1.125" (29 mm), and 1.25" (32 m ips. • One (1) SCBA complying with NFPA 198 1, Standard on Open- Circuit a tained Breathing Apparatus for Fire and Emergency Services, for each as ' e eat g position, but not fewer than four (4), mounted in brackets fastened to the appa tus r shored in containers supplied by the SCBA manufacturer. • One (1) spare SCBA cylinder for each SCBA carried, eac oun d ink bracket fastened to the apparatus or stored in a specially designed storage space(s). • One (1) first aid kit. • Four (4) combination spanner wrenches moun ed in brae s) fastened to the apparatus. • Two (2) hydrant wrenches mounted in bracke tened to the apparatus. • Four (4) ladder belts meeting the requirement f . PA 1983, Standard on Fire Service Life Safety Rope and System Components (if p e with an aerial device). • One (1) double female 2.50" (65 m a ith National Hose threads, mounted in a bracket fastened to the apparatus. • One (1) double male 2.50'(65 ) a apter with National Hose threads, mounted in a bracket fastened to the apparatus. • One (1) rubber mallet,lqfo suction hose connections, mounted in a bracket fastened to the apparatus. • Two (2).saly a ve ch a minimum size of 12 ft x 14 ft (3.7 m x 4.3 m). • One (1) t is est each seating position, each vest to comply with ANSIASEA 207, Standard fo igh Visibility Public Safety Vests, and have a five -point breakaway feature that includ s two ( at the shoulders, two (2) at the sides, and one (1) at the front. • FiveW, orescent orange traffic cones not less than 28.00" (711 mm) in height, each equipped ea ' " (152 mm) retro- reflective white band no more than 4.00" (152 mm) from the top of e c , and an additional 4.00" (102 mm) retro- reflective white band 2.00" (51 mm) below the. 00" (1 52 mm) band. • Five (5) illuminated warning devices such as highway flares, unless the five (5) fluorescent orange traffic cones have illuminating capabilities. • One (1) automatic external defibrillator (AED).. 96 of 106 • If the supply hose carried does not use sexless couplings, an additional double female adapter and double male adapter, sized to fit the supply hose carried, will be carried mounted in brackets fastened to the apparatus. • If none of the pump intakes are valved, a hose appliance that is equipped with one or more gated intakes with female swivel connection(s) compatible with the supply hose used on one side and a swivel connection with pump intake threads on the other side will be carried. Any in connection larger than 3.00" (75 mm) will include a pressure relief device that meets requirements of 16.6.6. • If the apparatus does not have a 2.50" National Hose (NH) intake, an adapter froNratu NH female to a pump intake will be carried, mounted in a bracket fastened to a ap f no t already mounted directly to the intake. • If the supply hose carried has other than 2.50" National Hose (N a pters will be carried to allow feeding the supply hose from a 2.50" NH thread ale is arge.and to allow the hose to connect to a 2.50" NH female intake, mounted in brackets fist d to the apparatus if not already mounted directly to the discharge or intake. �' SOFT SUCTION HOSE PROVIDED BY DEAL NFPA 1901, 2009 edition, section 5.7.2 requires a mi bF of 20 ft of suction hose or 15 ft of supply hose. AW Hose is not on the apparatus as manufacturer ter will provide suction or supply hose. STRAINER PROVIDED BY DEALFo NFPA 1901, 2009 edition, section 5 1 quires a suction strainer when suction hose is provided. The strainer is not on the appar tCi. anufactured. The dealer will provide the suction strainer. NFPA 1901, 2009 k tion 5.8.3 requires one (1) approved dry chemical portable fire extinguisher wi imu 80 -B:C rating mounted in a bracket fastened to the apparatus. The extinguislwr is nofon the apparatus as manufactured. The fire department will provide and mount the extingui WA IN_ GUISHER PROVIDED BY FIRE DEPARTMENT NFPA 901, 2009 edition, section 5.8.3 requires one (1) 2.5 gallon or larger water extinguisher mounted in a bra6ket fastened to the apparatus. The extinguisher is not on the apparatus as manufactured. The fire department will provide and mount the extinguisher. 97 of 106 J FLATHEAD AXE PROVIDED BY FIRE DEPARTMENT NFPA 1901, 2009 edition, Section 5.8.3 requires one (1) flathead axe mounted in a bracket-fastened to the apparatus. The axe is not on the apparatus as manufactured. The fire department will provide and mount the axe. PICKHEAD AXE PROVIDED BY FIRE DEPARTMENT NFPA 1901, 2009 edition, Section 5.8.3 requires one (1) pickhead axe mounted in a bracket to the apparatus. The axe is not on the apparatus as manufactured. The fire department will provide and oun a axe. PAINT - BODY PAINTED TO MATCH CAB The exterior custom cab and body painting procedure will consist of a se n ) nishing process as follows: 1. Manual Surface Preparation - All exposed metal surfaces the stom cab and body will be thoroughly cleaned and prepared for painting. Imper ections t e exterior surfaces will be removed and sanded to a smooth finish. Exterior se will b sealed before painting. Exterior surfaces that will not be painted include; chro a plating, fished stainless steel, anodized aluminum and bright aluminum treadplate. 2. Chemical Cleaning and Pretreatment - All su ce ill be chemically cleaned to remove dirt, oil, grease, and metal oxides to ensure th - s ent coatings bond well. The aluminum surfaces will be properly cleaned an a ing a high pressure, high temperature 4 step Acid Etch process. The steel and stain e s es will be properly cleaned and treated using a high temperature 3 step process spec ica esigned for steel or stainless. The chemical treatment converts the metal surface t ` e condition to help prevent corrosion. A final pure water rinse will be applied to al Neurfaces. 3. Surfacer Primer - Th arotective imer will be applied to a chemically treated metal surface to ;provide a strong basecoat. A minimum thickness of 2 mils of Surfacer Primer is t aces that require a Critical aesthetic finish. The Surfacer Primer is a two -comp t hig solids urethane that has excellent sanding properties and an extra smooth finish when sued. 4. Fini dine - The Surfacer Primer will be sanded with a fine grit abrasive to achieve an ultra - moot ish. This sanding process is critical to produce the smooth mirror like finish in the t 5. ealer Primer- The Sealer Primer is applied prior to the Basecoat in all areas that have not been reviously primed with the Surfacer Primer. The Sealer Primer is a two- component high solids urethane that goes on smooth and provides excellent gloss hold out when topcoated. 6. Basecoat Paint - Two coats of a high performance, two component high solids polyurethane basecoat will be applied. The Basecoat will be applied to a thickness that will achieve the proper 98 of 106 color match. The Basecoat will be used in conjunction with a urethane clear coat to provide protection from the environment. 7. Clear Coat - Two (2) coats of Clear Coat will be applied over the Basecoat color. The Clear Coat is a two- component high solids urethane that provides superior gloss and durability to the exterior surfaces. Lap style and roll -up doors will be Clear Coated to match the body. Paint warranty for the roll -up doors will be provided by the roll -up door manufacture. Specifications are written to define cyclic corrosion testing, physical strengths, durabilit and ini um appearance requirements must be met in order for an exterior paint finish to be conside a ccept9 e as a Pierce quality finish. Each batch of Basecoat color is checked for a proper match before painting oft ca nd the body. .After the cab and body are painted, the color is verified again to make sur t i t es the color standard. Electronic color measuring equipment is used to compare the c for a le to the color standard entered into the computer. Color specifications are used to dete n e color match. A Delta E reading is used to determine a good color match within each f co r. All removable items such as brackets, compartment doors, hinge , and trim will be removed and separately if required, to ensure paint behind all mounted items. dy assemblies that cannot be finish painted after assembly will be finish painted before bly. The cab will be two -tone, with the upper section white and lower section of the cab and body painted to be provided. PAINT - ENVIRONMENTAL IMPAC Contractor will meet or exceed all curs t to regulations concerning paint operations. Pollution control will include measures to pr tmosphere, water and soil. Controls will include the following conditions: • Topcoats and primpr4will3e c come and lead free. • Metal trea icals will be chrome free. The wastewater generated in the metal treatment process Zeion eat on -site to remove any other heavy metals. • Particulate collection from sanding operations will have a 99.99% efficiency factor. • Partio6ate emissions from painting operations will be collected by a dry filter or water wash roce the dry filter is used, it will have an efficiency rating of 98.00 %. Water wash s will be 99.97% efficient • ater from water wash booths will be reused. Solids will be removed on a continual basis to eep the water clean. • Paint wastes are disposed of in an environmentally safe manner. • Empty metal paint containers will be to recover the metal.. • Solvents used in clean-up operations will be recycled on -site or sent off -site for distillation and returned for reuse. 99 of 106 Additionally, the finished apparatus will not be manufactured with or contain products that have ozone depleting substances. Contractor will, upon demand, present evidence that the manufacturing facility meets the above conditions and that it is in compliance with his State EPA rules and regulations. PAINT CHASSIS FRAME ASSEMBLY The chassis frame assembly will be painted black before the installation of the cab and body, a d before installation of the engine and transmission assembly, air brake lines, electrical wire harnesses e Components that are included with the chassis frame assembly that will be painted not Naled a • Frame rails • Cross members • Axles • Suspensions • Steering gear • Battery boxes • Bumper extension weldment • Frame extensions • Body mounting angles • Rear Body support substructure (front and r • Pump house substructure • Air tanks. • Fuel tank • Castings • Individual piece parts used ir, c a nd body assembly Components treated with • Two (2) The E -coat prior to paint: technical properties shown. The compa - interior will be painted with a gray spatter finish for ease of cleaning and to make it easier touch,u scratches and nicks. Three (reflective stripes will be provided across the front of the vehicle and along the sides of the body. The reflective band will consist of a 1.00" white stripe at the top with a 1.00" gap then a 6.00" white stripe with a 1.00" gap and a 1.00" white stripe on the bottom. The reflective band provided on the cab face will be below the headlights on the fiberglass or on the bumper. 100 of 106 CHEVRON STRIPING, REAR There will be alternating chevron striping located on the rear - facing vertical surface of the apparatus. The rear surface, excluding the rear roll up door, will be covered. The colors will be red and yellow diamond grade. Each stripe will be 6.00" in width. This will meet the requirements of NFPA 1901, 2009 edition, which states that 50% of t rear surf ce will be covered with chevron striping. VINYL STRIPE There will be a vinyl stripe applied above and below the reflective band. The Is 'pes will be .50" wide with an outline. REFLECTIVE STRIPE OUTLINE A black vinyl outline will be provided for each chevron stripe at 01, rearlrf the truck. REFLECTIVE STRIPE, CAB DOORS A 4.00" x 24.00" black reflective stripe will be provided across nterior of each cab door. The stripe will be located approximately 1.00" up from the bolt on the s ainless steel door panel. This stripe will meet the NFPA 1901 requirement. CAB STRIPE There will be a genuine gold leaf stripe pro, n both sides of the cab in place of the chrome and on the cab face with shield. LETTERING The lettering will be totally e d between two (2) layers of clear vinyl. LETTERING There will be ge ne of f lettering, 4.00" high, with outline and shade provided. There will be six (6) letters provide . LETTERI Ther will b e ctive lettering, 4.00" high, with outline and shade provided. There will be six (6) letter LETT*MG There will be reflective lettering, 3.00" high, with outline and shade provided. There will be ten (10) letters provided. LETTERING One (l) to twenty (20) genuine gold leaf lettering, 9.00" high, with outline and shade will be provided. 101 of 106 MALTESE CROSS INSTALLATION There will be one (1) pair of maltese crosses, comprised of genuine gold leaf material, provided and installed Located on cab doors. MANUAL, FIRE APPARATUS, PARTS Two (2) custom parts manuals for the complete fire apparatus will be provided in hard copy with the completed unit. ID The manual will contain the following: - Job number - Part numbers with full descriptions -N CV - Table of contents - Parts section sorted in functional groups reflecting a major syst _ , com ne t, or assembly - Parts section sorted in Alphabetical order - Instructions on how to locate a part The manual will be specifically written for the chassi dy model being purchased. It will not be a generic manual for a multitude of different chassis MIWTes. SERVICE PARTS INTERNET SITE Vfte The service parts information included i a ual is also available on the Pierce website. The website offers additional functions and eatu s not contained in this manual, such as digital photographs and line drawings of select items. ` Re also features electronic search tools to assist in locating parts quickly. MANUALS CHASSIS I Two (2) chassis s uals containing parts and service information on major components will be provided with t e fete • unit.. - Front Axle /Suspension - Brakes the following sections: 102 of 106 - Engine - Tires - Wheels - Appendix The manual will be specifically written for the chassis model being purchased will not be a generic manual for a multitude of different chassis and bodies. lop MANUALS, CHASSIS OPERATION Two (2) chassis operation manuals will be provided. ONE 1 YEAR MATERIAL AND WORKMANS A Pierce basic apparatus limited warranty certificate, A 08, is included with this proposal. ENGINE WARRANTY C; A Detroit Diesel five (5) year limited engin my will be provided. A limited warranty certificate, WAO1180, is included with this proposa . A Sheppard three (3) year li Ang gear warranty shall be provided. A copy of the warranty certificate shall be submitt, ith he package. The Pierce custom ssis frame limited warranty certificate, WA0013, is included with this proposal. The Pierce suspension limited warranty certificate, WA0050, is included with this proposal. HEAR AXUETWO 2 YEAR MATERIAL AND WORKMANSHIP WARRA A Meri axle limited warranty certificate, WA0046, is included with this proposal. ABS _BRAKE _SYSTEM THREE (3) YEAR MATERIAL AND WORKMANSHIP WARRANTY A Meritor WabcoTmABS brake system limited warranty certificate, WA0232, is included with this proposal. 103 of 106 TEN (10) YEAR STRUCTURAL INTEGRITY The Pierce custom cab limited warranty certificate, WA0012, is included with this proposal. TEN (10) YEAR PRO- RATED -PAINT AND CORROSION A Pierce cab limited pro -rated paint warranty certificate, WA0055, is included with this proposal. TWO (21 -YEAR MATERIAL AND WORKMANSHIP The Pierce power step limited warranty certificate, WA0031, is included with this proposal. 10) FIVE (5) YEAR MATERIAL AND WORKMANSHIP The Pierce Command Zone electronics limited warranty certificate, WA0014, is include wit, this proposal. CAMERA SYSTEM WARRANTY A Pierce fifty four (54) month warranty will be provided for the camera syste COMPARTMENT LIGHT WARRANTY The Pierce 12 volt DC LED strip lights limited warranty ce 'ficate, 203, is included with this proposal. TRANSMISSION WARRANTY The transmission will have a five (5) year /unlimited " i e warranty covering 100 percent parts and labor. The warranty will be provided by Allison ion. Note: The transmission cooler is not covere y extended warranty you may be getting on your Allison Transmission. Please review yo Transmission warranty for coverage limitations. The transmission cooler will cars, fiv (5) year parts and labor warranty (exclusive to the transmission co_ oler). In addition, a collat a e warranty will also be in effect for the first three (3) years of the warranty coverage and w' eed $10,000 per occurrence. A copy of the warranty certificate will be submitted with t a c age. WATER TANK NTY A UPF poly ter tan limited warranty certificate, WA0195, is included with this proposal. TE Y STRUCTURAL INTEGRITY The P aratus body limited warranty certificate, WA0009, is included with this proposal. An AMDOR roll -up door limited warranty will be provided. The roll -up door will be warranted against manufacturing defects for a period of ten (10) years. A five (5) year limited warranty will be provided on painted roll up doors. The limited warranty certificate, WA0185, is included with this proposal. 104 of 106 SIX (6) YEAR MATERIAL AND WORKMANSHIP A Pierce PUC pump limited warranty certificate, WA0039, is included with this proposal. TEN (101 YEAR PUMP PLUMBING WARRANTY The Pierce apparatus plumbing limited warranty certificate, WA0035, is included with this proposal. FOAM SYSTEM WARRANTY The Husky 3 foam system limited warranty certificate, WA0231, is included with this propos . TEN (10) YEAR PRO -RATED PAINT AND CORROSION A Pierce body limited pro -rated paint warranty certificate, WA0057, is included with thi pro sal. THREE (3) YEAR MATERIAL AND WORKMANSHIP The Pierce Goldstar gold leaf lamination limited warranty limited warran c i , WA0418, is included with this proposal. VEHICLE STABILITY CERTIFICATION A lop The fire apparatus manufacturer will provide a certification tating. t paratus complies with NFPA 1901, current edition, section 4.13, Vehicle Stability. The e catio will be provided at the time of bid. ENGINE INSTALLATION CERTIFICATION_ The fire apparatus manufacturer will provide a c ' i , along with a letter from the engine manufacturer stating they approve of the engi a to ation in the bidder's chassis. The certification will be provided at the time of delivery. The fire apparatus manufacturer e a certification stating the power steering system as installed meets the requirementsoo a omponent supplier. The certification will be provided at the -time of bid. CAB INTEGRIT��� F CATION Pierce manufac u P ill p Tovide a cab crash test certification with this proposal. states that the cab m eet or exceed the requirements below: 1 - European nt Protection Standard ECE Regulation No.29 - SA_ ab Roof Strength Evaluation - Quasi - Static Loading Heavy Trucks SAE IF420 COE Frontal Strength Evaluation - Dynamic Loading Heavy Trucks - Roof Crush The certification The cab will be subjected to a roof crush force of 26,400 lb. This value will be 120 percent of the ECE 29 criteria, and equivalent to the front axle rating up to a maximum of ten (10) metric tons. 105 of 106 - Side Impact The cab will be subjected to dynamic preload when a 14,060 lb moving barrier is slammed into the side of the cab at 5.10 mph, striking with an impact of 12,200 ft -lb of energy. This test will closely represent the forces a cab will see in a rollover incident. - Frontal Impact The cab will withstand a frontal force produced from 65,000 ft-lb of energy using a swi ` -bob type platen. CAB AIR CONDITIONING PERFORMANCE CERTIFICATION Good cab air conditioning temperature and air flow performance keeps occup co ortable, reduces humidity, and provides a climate for recuperation while at the scene. Th itioning system will cool the cab from a heat - soaked condition at 100 degrees Fahrenheit o Jaa rage of 73 degrees Fahrenheit in 30 minutes. The bidder will certify that a substanti ly simhas been tested and has met these criteria. AMP DRAW REPORT I ' The bidder will provide, at the time of bid and delive , an items print out of the expected amp draw of the entire vehicle's electrical system. The manufacturer of the apparatus will provide • Documentation of the electrical • A written load analysis, which o The nameplate rating of • The alternator ■ Applic • The minimurd ffiffnance tests. the following: °`die conditions specified per 1901 or 1906 (Current Edition). load of each component that is specified per: niti I cl IFPA 1901 or 1906 (Current Edition). o al s that, when added to the minimum continuous load, determine the total con ed load. o Each i ividual intermittent load. All o e abo sted items will be provided by the bidder per the applicable NFPA 1901 or 1906 (Cu t n). 106 of 106 EXHIBIT B Pierce Manufacturing Inc. AN OSHKOSH CORPORATION COMPANY+ ISO 9001:2000 CERTIFIED 2600 AMERICAN DRIVE POST OFFICE BOX 2017 APPLETON, WISCONSIN 54912 -2017 920 -832 -3000 • FAX 920 -832 -3208 www.piercemfg.com Gilroy Fire Department 7070 Chestnut Street Gilroy, CA 95020 -6610 PROPOSAL FOR PIERCE® FIRE APPARATUS DATE December 21, 2015 ,_ QUOTE NO. 41221 -15 EXPIRES March 10, 2016 SALES REP. Rich Myers The undersigned is prepared to manufacture for you, upon an order being placed by you, for final acceptance by Pierce Manufacturing, Inc., at its home office in Appleton, Wisconsin, the apparatus and equipment herein named and for the following prices: OPTION A: 50% PAYMENT AT 50% COMPLETION # Description Each A One 1 Quantum PUC Pumper HGAC FS12 -15, TC07 628,133.83 B Discount for HGAC contract number FS12 -15, TC07 (36,897.00). C Facto Inspection Trips 2 trips, 3 GFD representatives per trip) 8,400.00 D Golden State Credit to split costs on inspection trips 4,200.00 E Delivery / Dealer Preparation 4,250.00 F Performance Bond 1,801.93 G . Gilroy FD Pre - Construction Contingency Fund 10,000.00 G DISCOUNT FOR 50% PAYMENT AT 50% COMPLETION 15,494.69 H <SOBT&AL 595,994 07' I. _State:,Sales_Tax @ 8.75% 52,149.48. J TOTAL PURCHASE PRICE 648,143.55 OPTION A - 50% PAYMENT AT 50% COMPLETION TERMS AND CONDITIONS: 1) The City of Gilroy shall pay $332,497.02 for the Product one hundred fifty (150) calendar days after the contract is signed (or a Purchase Order is issued) directly to Pierce Manufacturing Inc. 2) Balance of $315,646.53 for the Product shall be paid within fifteen (15) calendar days of the unit departing the manufacturing facility. OPTION B: FULL PAYMENT AT DELIVERY # Description Each A One 1 Quantum PUC Pumper HGAC FS12 -15, TC07 628,133.83 B Discount for HGAC contract number FS12 -15, TC07 36,897.00 C Factory Inspection Trips 2 trips, 3 GFD representatives per trip) 8,400.00 D I Golden State Credit to split costs on inspection trips 4,200.00 E Deliver /Dealer Preparation 4,250.00 F Performance Bond 1,801.93 G Gilroy FD Pre - Construction Contingency Fund 10,000.00 H SUBTOTAL 611;4 &76 I State Sales Tax @ 8.75% 53,505.27 J TOTAL PURCHASE PRICE 664,994.03 OPTION _B - FULL PAYMENT AT DELIVERY TERMS AND CONDITIONS: 1) The City of Gilroy shall pay the purchase price of $664.994.03 for the Product within fifteen (15) calendar days of the units departing the manufacturing facility. Said apparatus and equipment are to be built and shipped in accordance with the specifications hereto attached, delays due to strikes, war, or intentional conflict, failures to obtain chassis, materials, or other causes beyond our control not preventing, within about 295 TO 325 calendar days after receipt of this order and the acceptance thereof at our office at Appleton, Wisconsin, and to be delivered to you at GILROY, CALIFORNIA. The specifications herein contained shall form a part of the final contract, and are subject to changes desired by the purchaser, provided such alterations are interlined prior to the acceptance by the company of the order to purchase, and provided such alterations do not materially affect the cost of the construction of the apparatus. The proposal for fire apparatus conforms with all Federal Department of Transportation (DOT) rules and regulations in effect at the time of bid, and with all National Fire Protection Association (NFPA) Guidelines for Automotive Fire Apparatus as published at the time of bid, except as modified by customer specifications. Any increased costs incurred by first party because of future changes in or additions to said DOT or NFPA standards will be passed along to the customers as an addition to the price set forth above. Any Purchase Order (PO) issued as a result of this proposal should be made out to Pierce Manufacturing Inc. Unless accepted by March 10, 2016, the right is reserved to withdraw this proposition. Respectfully Submitted, Authorized Sales Representative EXHIBIT C Premium: $1,616.00 Bond No. 9210339 Fidelity and Deposit Company of Maryland HOME OFFICE 3910 KESWICK ROAD BALTIMORE, MARYLAND 21211 PERFORMANCE AND PAYMENT BOND KNOW ALL MEN BY THESE PRESENTS, THAT, Pierce 2600 American Drive. PO Box 2017, Appleton, WI_5491, (hereinafter called Principal), as Principal and 1400 American Lane, To I, 18th,Floor, Schaumbur IL 60196 -1056 a corporation organized and existing under the laws of the State of IIrD with its principal ofi'ice in the City of Schaumburg, IL , (hereinafter called Surety) as Surety are held and firmly bound unto City of Gilroy (hereinafter called the Owner) and to all persons who furnish labor or material directly to the Principal for use in the prosecution of the work hereinafter named, in the just and full sum of Six Hundred Sixty Four Thousand Nine Hundred Ninety Four Dollars and 00/100 Dollars (f64,994.00 ) to the payment of which sum well and truly to be made, the said Principal and Surety bind themselves, and their respective heirs, administrators, executors, successors And assigns, jointly and severally, firmly by these presents. WHEREAS the Principal has entered into a certain written contract with the Owner, dated the 29th day of February 2016 , for One (1) Pierce Quantum PUC Pumper which contract is hereby referred to and made a part hereof as fully and to the same extent as if copied at length herein. NOW, THEREFORE, THE CONDITION OF THIS OBLIGATION IS SUCH, that if the said Principal shall fully indemnify the Owner from and against any failure on his/her part faithfully to perform the obligations imposed upon him/her under the terms of said contract free and clear of all liens arising out of claims for labor aria material entering into the work, and if the said Principal shall pay all persons who shall have furnished labor or material directly to the Principal for use in the prosecution of the aforesaid work, each of which said persons shall have a direct right of action. on this instrument in his/her own name and for his/her own benefit, subject, however, to the Owner's priority, then this obligation to be void; otherwise to remain in full force and effect. PROVIDED, HOWEVER, that no action, suit or proceeding shall be had or.maintained against the Surety on this instrument unless the same be brought or instituted and process served upon the Surety within two years after completion of the work mentioned in said contract, whether such work be completed by the Principal, Surety or Owner; but if there is any maintenance or warranty period provided in the contract for which said Surety is liable, an action for such maintenance or warranty may be brought within two years from the expiration of said maintenance or warranty period, but not afterwards. IN WITNESS lfWHEREOF the said 2 cipal and Surety have signed and sealed this instrument this - nd day of , Pierce Manufacturing Inc. Witness: Katherine Pischke l� err on ley Sr. Mgr. 2l r�Mgt. principal UPp�Il Q'�►�y � ide[it and De osit Com un of Maryland ; Surety 7840 �� Sarah E. DeYoung A tt mey- Fact Bond Number 9210339 Obligee: City of Gilrov ZURICH AMERICAN INSURANCE COMPANY COLONIAL AMERICAN CASUALTY AND SURETY COMPANY FIDELITY AND DEPOSIT COMPANY OF MARYLAND POWER OF ATTORNEY KNOW ALL MEN BY THESE PRESENTS: That the ZURICH AMERICAN INSURANCE COMPANY, a corporation of the State of New York, the COLONIAL AMERICAN CASUALTY AND SURETY COMPANY, a corporation of the State of Maryland, and the FIDELITY AND DEPOSIT COMPANY OF MARYLAND a corporation of the State of Maryland (herein collectively called the "Companies "), by Michael P. Bond, Vice President, in pursuance of authority granted by Article V, Section 8, of the By -Laws of said Companies; which arc set forth on the reverse side hereof and are hereby certified to be in full force and effect on the date hereof, do hereby nominate, constitute, and appoint Sarah E. DeYoung , its true and lawful agent and Attorney -in -Fact; to make, execute, seal and deliver, for, and on its behalf as surety, and as its act and deed: any and all bonds and undertakings, and the execution of such bonds or undertakings in pursuance of these presents, shall be as binding upon said Companies, as fully and amply, to all intents and purposes, as if they had been duly executed and acknowledged by the regularly elected officers of the ZURICH AMERICAN INSURANCE COMPANY at its office in New York, New York., the regularly elected officers of the COLONIAL AMERICAN CASUALTY AND SURETY COMPANY at its office in Owings Mills, Maryland., and the regularly elected officers of the FIDELITY AND DEPOSIT COMPANY OF MARYLAND at its office in Owings Mills, Maryland., in their own proper persons. The said Vice President does hereby certify that the extract set forth on the reverse side hereof is a true copy of Article V, Section 8, of the By -Laws of said Companies, and is now in force. IN WITNESS WHEREOF, the said Vice - President has hereunto subscribed his/her names and affixed the Corporate Seals of the said ZURICH AMERICAN INSURANCE COMPANY, COLONIAL AMERICAN CASUALTY AND SURETY COMPANY, and FIDELITY AND DEPOSIT COMPANY OF MARYLAND, this 22"d day of July, A.D. 2015. _ ATTEST: ZURICH AMERICAN INSURANCEL COMPANY COLONIAL AMERICAN CASUALTY AND SURETY COMPANY FIDELITY AND DEPOSIT COMPANY OF MARYLAND A, 1-0 12-1 By. Michael A Bond Vice President By. Eric D. Barnes Secretary State of Maryland County of Baltimore ° A SEAL 1908 On this.22nd day of July, A.D. 2015, before the subscriber, a Notary Public of the State of Maryland, duly cottunissioncd and qualified, Michael P. Bond, Vke President and Eric D. Barnes, Secretary of the Companies, to me personally known to be the individuals and officers described in and who executed the preceding instrmnent, and acknowledged the execution of same, and being by me duly swum, deposeth and saith, that he/she is the said officer of the Company aforesaid, and that the seals affixed to the preceding instrument are the Corporate Seats of said Companies, and that the said Corporate Seals and the signature as such officer were duly affixed and subscribed to the said instrument by the authority and direction of the said Corporations. IN TESTIMONY WHEREOr, I have hereunto set my hand and affixed my Official Seal the day and year first above written. /�- '.••..' Constance A. Dunn, Notary Public �`� ...•tire �� My Commission Expires: July 9; 2019 EXTRACT FROM BY -LAWS OF THE COMPANIES "Article V, Section 8, Attorneys -in -Fact. The Chief Executive Officer, the President, or any Executive Vice President-or Vice-President may, by written instrument under the attested corporate seat, appoint attomeys -in -fact with authority to execute bonds, policies, recognizances; stipulations, undertakings, or other like instruments on behalf of the Company, and tnay authorize any officer or any such attorney -in -fact to affix the corporate seal thereto; and may with or without cause modify of revoke any such appointment or authority at any time." CERTIFICATE 1, the undersigned, Vice President of the ZURICH AMERICAN INSURANCE COMPANY, the COLONIAL AMERICAN CASUALTY AND SURETY COMPANY, and the FIDELITY AND DEPOSIT COMPANY OF MARYLAND, do hereby certify that the foregoing Power of Attorney is still in full force and effect on the date of this certificate; and I do further certify that Article V, Section 8; of the By -Laws of the Companies is still in force. This Power of Attorney and Certificate .may be signed by facsimile under and by authority of the following resolution of the Board of Directors of the ZURICH AMERICAN INSURANCE COMPANY at a meeting duly called and held on the 15th day of December 1998. RESOLVED: "That the signature of the President or a Vice President and the attesting signature of a Secretary or an Assistant Secretary and the Seal of the Company may be affixed by facsimile on any Power of Attorney ... Any such Power or any certificate thereof bearing such facsimile signature and seal shall be valid and binding on the Company." This Power of Attorney and Certificate may be signed by facsimile under and by authority of the following resolution of the Board of Directors of the COLONIAL AMERICAN CASUALTY AND SURETY COMPANY at a meeting duly called and held on the 5th day of May, .1994, and the following resolution of the Board of Directors of the FIDELITY AND DEPOSIT COMPANY OF MARYLAND at ,a meeting duly called and held on the 10th day of May, 1990. RESOLVED: "That the facsimile or mechanically reproduced seal of the company and facsimile or mechanically reproduced signature of any Vice - President, Secretary, or Assistant Secretary of the Company, whether made heretofore or hereafter, wherever appearing upon a certified copy of any power of attorney issued by the Company, shall be valid and binding upon the Company with the same force and effect as though manually affixed. IN TESTIMONY WHEREOF, I have hereunto subscribed my name and affixed the corporate seals of the said Companies, this 2nd day of March , 2016 SEAL tn� Y,"8 lase «. Thomas O. McClellan, Vice President ACKNOWLEDGEMENT BY SURETY STATE OF WISCONSIN ) ) ss COUNTY OF MILWAUKEE) On this 0� day of /-Wjcalt , LI04`o before me personally appeared Sarah E. DeYoung , known to me to be the Attorney -in -Fact of Fidelity and Deposit Company of Maryland, the corporation that executed the within instrument and acknowledged to me that such corporation executed the same. IN WITNESS WHEREOF, I have hereunto set my hand and affixed my official seal, at my office in the aforesaid County, the day and year in this certificate first above written.. . My Commission Expires May 29, 2 18 / (SEAL) Lucy A. Hantzsch Notary Public in the State of Wisconsin County of Milwaukee EXHIBIT D Fire and Rescue Apparatus One (1) Year Material and Workmanship Basic Apparatus Limited Warranty Subject to the limitations and exclusions set forth below, Pierce Manufacturing provides the following warranty to the Buyer. Coverage: Portions of the apparatus manufactured by Pierce shall be free from defects In material and workmanship Warranty Begins: The date the apparatus Is placed In service, or 60 days from the original buyer Invoice date, whichever comes first Warranty Period Twelve (12) months. Ends After - Conditions and Exclusions: See Also No specific exclusions apply Paragraphs 2 thru 4 This limited warranty shall apply only if the product is properly maintained in accordance with Pierce's maintenance instructions and manuals and is used in service which is nonnal!to the particular model. Normal service means service which does not subject the product to stresses or impacts greater than normally result from careful use. If the Buyer discovers a defect or nonconformity, it must notify Pierce In writing within thirty (30) days .after the date of discovery, but in any event prior to the expiration of the warranty period. THIS LIMITED WARRANTY MAY NOT BE ASSIGNED OR OTHERWISE TRANSFERRED BY THE BUYER TO ANY SUBSEQUENT USER OR PURCHASER OR TO ANY OTHER PERSON OR ENTITY. 218/2010 WA0008 Notwithstanding anything to the contrary herein, Pierce makes no warranty whatsoever as to: (a) any integral parts, components, . attachments or trade accessories of or to the product that are not manufactured by Pierce, including but not limited to engines, transmissions, drivelines, axles, water pumps and generators: with respect to all such parts, components, attachments and accessories,. Pierce shall assign to Buyer the applicable warranties, if any, made by the respective manufacturers thereof (b) any vehicle, chassis, or component, part,; attachment or accessory damaged by misuse, neglect, fire, exposure to severe environmental or chemical conditions, acidic environment, improper maintenance, accident, crash, or force:majeure such as natural disaster, lightning, earthquake, windstorm, hall, food, war or not: (c) any vehicle, chassis or component, part,. attachment or accessory that has been repaired altered or assembled in any way by any person or entity other than Pierce which, in the sole judgment of Pierce, adversely affects the performance, stability or purpose for which it was manufactured: or (d) products or parts which may in the ordinary course wear out and have to be replaced during the warranty, period, Including, but not limited to, tires. fluids, gaskets and light bulbs. Pierce assumes no responsibility for the assembly of Its parts or subassemblies into finishing products or vehicles unless the assembly is performed by Pierce. The original purchaser may void this warranty in part or in its entirety if the product is repaired or replaced (a) without prior written approval of the Pierce Customer Service Department; or (b) at a facility which has not been approved by Pierce as to technical capability. Any repairs. modifications, alterations or aflermarket parts added after manufacture without the authorization of Pierce may void this warranty. 2. DISCLAIMERS OF WARRANTIES THE WARRANTY SET FORTH IN PARAGRAPH 1 IS THE SOLE AND EXCLUSIVE WARRANTY GIVEN BY PIERCE. PIERCE HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY, ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, AND ANY WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE. 3. BUYER'S EXCLUSIVE REMEDY. If the product fails to oonform to the warranty set forth in paragraph 1 during the warranty period, and such nonconformity Is not due to misuse, neglect, . accident or improper maintenance, Buyer must notify Pierce within the time period specifiedin paragraph 1, and shall make the product available for inspection by Pierce or its designated agent At the request of Pierce, any allegedly defective product shall be returned to Pierce by Buyer for examination and/or repair. Buyer shall be responsible for the cost of such transportation, and for risk of loss of or damage to the product during transportation.. Within a reasonable time, Pierce shall repair or replace (at Pierce's option and expense) any nonconforming or defective parts. Repair or replacement shall be made only by a facility approved in advance in writing by Pierce. THIS REMEDY SHALL BE THE EXCLUSIVE AND SOLE REMEDY FOR ANY BREACH OF WARRANTY. 4. EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAO ES. Notwithstanding anything to the contrary herein or In any agreement between Pierce and Buyer, IN NO EVENT SHALL PIERCE BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, SPECIAL,, INDIRECT, OR PUNITIVE DAMAGES WHATSOEVER: WHETHER ARISING OUT OF BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR OTHER THEORY OF LAW OR EQUITY, WITH RESPECT TO VEHICLES OR OTHER PRODUCTS SOLD BY PIERCE, OR THEIR OPERATION OR FAILURE TO OPERATE. OR ANY DEFECTS TS THEREIN, OR ANY UNDERTAKINGS, AC OR OMISSIONS RELATED THERETO, REGARDLESS OF WHETHER PIERCE HAS BEEN INFORMED OF THE POSSIBILITY OF ANY SUCH DAMAGES. Without limiting the generality of the foregoing, Pierce specifically disclaims any liability for property or personal injury damages, penalties. damages forlost profits or revenues, loss of vehicles or products or any associated equipment, cost of substitute vehicles or products, down -lime, delay damages, any other types of economic loss, or for any claims by any third party for any such damages. Note: Any Surety Bond, if a part of the sale of the vehicle as to which this limited warranty is provided. applies only to this Pierce Basic One Year Limited Warranty for such vehicle, and not to other warranties made by Pierce in a. separate document (if any) or to the warranties (if any) made by any manufacturer (other than Pierce) of any part, component, attachment or accessory that is incorporated into or attached to the vehicle. Limited Warranty on New Detroit Diesel x DD13 Engines ioieTRarT Used In Fire Truck or Crash Vehicle Applications 1 17IIE51EL Terms of Coverage: uses This warranty applies to the first retail purchaser and subsequent own - ers during the WARRANTY PERIOD of new DD13 Engines (referred to as Engine) manufactured by Detroit Diesel and /or supplied by Detroit. Diesel or Detroit Diesel of Canada Limited (which are collec- tively referred to as Detroit Diesel) for use in fire truck or crash vehicle applications. Defects This warranty covers Engine REPAIRS to correct any malfunction occurring during the WARRANTY PERIOD resulting from defects in material or workmanship. Repairs To obtain warranty repairs, you must request the needed repairs with- in the WARRANTY PERIOD from an authorized Detroit Diesel service outlet. Only new genuine parts, remanufactured parts or components supplied or approved by Detroit Diesel will be used. Detroit Diesel may, at its discretion, replace rather than repair components. A reasonable time must be allowed to perform the warranty repair after taking the engine to the authorized service outlet. Repairs will be performed dur- ing normal business hours. Warranty Period The WARRANTY PERIOD begins on the date the Engine is delivered to the first retail purchaser or put in use prior to sale at retail, whichev- er date occurs first, and ends at the time or mileage /kilometer limits shown below: WARRANTY PERIOD - _ Warranty Limitations Repair Charge To ea item (Whichever Occurs First Paid By Owner EAONTRS - M LESMI - PARTS LABOR Enti to 040 0.100,0W rid. 0-160.000 In No Charge. No Charge - AaessmW 0.24, 0.100'000 M 0.160.000 km No Charge No Charge Fire Commander warranty Is two yeartunlimited mileage. Service Supplies The cost of service supplies such as coolant, oil and filters which are not reusable due to needed repairs is covered by this warranty. Like Replacement Engine Engine(s) supplied by Detroit Diesel as a replacement for an Engine still under warranty Will assume the identity of the Engine being replaced and be entitled to the remaining warranty coverage. Engine Removal and Reinstallation Reasonable. labor costs for engine removal and reinstallation, when necessary to make a warranty repair, are covered by this warranty. Towing During the base warranty period reasonable towing costs to the near- est authorized service outlet are covered by the warranty when due to warrantable failure and the engine is either inoperable, cannot be safely operated or continued operation would cause further damage to the Product. This Warranty Does Not Cover: Repairs Due To Accidents, Misuse, Alteration, Storage Damage, Negligence Or Certain Modifications Repairs due to an accident, misuse, alteration, misapplication, storage damage, negligence or modification exceeding Detroit Diesel specifications, are not covered by this warranty. Maintenance Detroit Diesel is not responsible for the cost of maintenance or repairs due to lack of performance of required maintenance services or the failure to use fuel, oil, lubricants and coolant meeting Detroit Diesel- recommended specifications. Performance of the required mainte- nance and use of proper fuel, oil, lubricants and coolant are the responsibility of the owner. See the Engine. Operator's Guide for full details. Incidental or Consequential Damages Detroit Diesel is not responsible for incidental or consequential costs or expenses which the owner may incur as a result of a malfunction or failure covered by this warranty, such as communication expenses, meals, lodging, overtime, loss of use of the, Engine or vehicle ("down- time"), loss of time, inconvenience, cargo loss or damage, and other similar costs and expenses. Other Limitations The performance of REPAIRS is the exclusive Owner's remedy under this warranty. Detroit Diesel does not authorize any person to assume or create for it any other obligation or liability in connection with the Engine or the Accessories. THIS LIMITED WARRANTYAND THE EMISSIONS CONTROL WAR- RANTY ARE THE ONLY WARRANTIES APPLICABLE. TO THE ENGINE AND ACCESSORIES AS USED IN FIRE TRUCK OR CRASH VEHICLE APPLICATIONS. DETROIT DIESEL MAKES NO OTHER WARRANTIES EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. DETROIT DIESEL SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES AS DESCRIBED ABOVE. Some states do not allow the limitation of how long this warranty may last or the limitation or exclusion of.incidentai or consequential dam- ages, so the above may not apply to you. This warranty gives you spe- cific legal rights, and you may also have otherrights which may vary from state to state. DETROIT DIESEL DEMAND PERFORMANCE" 13400 Outer Drive, West / Detroit. Michigan 482394001 Telephone: 313 -592 -5000 www.detroitdiesel.com DDC -WAR- PAR - 0019-0609 Specifications are subject to change without notice. Detroit Diesel Corporation is registered to IS09001:2001. CopyrighttC 2008, Detroit Diesel Corporation. All rights reserved. Detroit Diesel Corporation is a Daimler company. Fire and Rescue Apparatus Three (3) Year Material and Workmanship TAK-4 Independent Front Suspension ZG oe&d . 0"Vuto Subject to the limitations and. exclusions set forth below, Pierce Manufacturing provides the following warranty to the Buyer: This limited warranty shall apply only if the product Is properly maintained in accordance with Pierce's maintenance instructions and manuals and is used in service which is normal to the particular model. Normal service means service which does not subject the product to stresses or impacts greater than normally result from careful use. If the Buyer discovers a defect or nonconformity, it must notify Pierce in writing within thirty (30) days after the dale of discovery, but in any event prior to the expiration of the warranty period. THIS LIMITED WARRANTY MAY NOT BE ASSIGNED OR OTHERWISE TRANSFERRED BY THE BUYER TO ANY SUBSEQUENT USER OR PURCHASER OR TO ANY OTHER PERSON OR ENTITY. 12/16/2013 WA0050 Notwithstanding anything to the contrary herein,. Pierce makes no warranty whatsoever as to: (a) any Integral parts, components, attachments or trade accessories of or to the product, that are not manufactured by Pierce, Including but not limited to engines; transmissions, drivellnes, axles, water pumps and generators; with respect to all such parts, . components, attachments and accessories,. Pierce shag' assign. to: Buyer the applicable warranties, If any, made by the respective manufacturers thereof; (b) any vehicle, chassis,, or component. part, attachment or accessory damaged by misuse, neglect, Ore, exposure to severe environmental or chemical conditions, acidic environment. Improper maintenance, accident, crash, or force majeure such as natural disaster, lightning, earthquake, windstorm, hail,: flood, war or riot; (c) any vehicle, chassis or component. part, attachment or accessory that has tieen repaired, altered or assembled In any way by any person or entity other than Pierce which, in the sole judgment. of Pierce, adversely affects the performance, stability or purpose for which it was manufactured; or (d) products or parts which may In the ordinary course wear out and have .tobe replaced during the warranty period, including, but not fimited to, Ores, fluids, gaskets and light bulbs. Pierce assumes no responsibility for the assembly of its pads or subassemblies into finishing products or vehicles unless the assembly Is performed by Pierce. The original purchaser may void this warranty in part or in its entirely if the product is repaired or replaced (a) without prior written approval of the Pierce Customer Service Department; or (b) at a facility which has not been approved. by Pierce as to technical capability. Any repairs, modifications; alterations or aftermarket parts added after manufacture without the authorization of Pierce may void this warranty. 2 DISCLAIMERS OF WARRANTIES THE WARRANTY SET FORTH IN PARAGRAPH 1 I THE SOLE AND EXCLUSIVE WARRANTY GIVEN BY PIERCE. PIERCE HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES. WHETHER EXPRESS, IMPLIED OR STATUTORY. INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY,. ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, AND ANY WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE. 3, BUYER'S EXCLUSNE REMEDY. If the product falls to conform to the warranty set forth In paragraph 1 during the warranty .period, and such nonconformity is not duo to misuse; neglect. accident or Improper maintenance, Buyer must noth Pierce within the time period spectfed in paragraph 1, and shag make the product available for Inspection by Pierce or its designated agent.. At the request of Pierce, . any allegedly defective product shall be,returned to Pierce by Buyer for examination and/or repair. Buyer shall be responsible for the cost of such transportation, and for risk of loss of or damage to the product during transportation. Within a reasonable time. Fierce shall repair or replace (al Pierces option and expense). any nonconforming or defective parts. Repair or replacement shall be,made only by a. facility approved in advance in writing by Pierce. THIS REMEDY .SHALL BE THE EXCLUSIVE AND SOLE REMEDY FOR ANY BREACH OF WARRANTY. 4 EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAGES. Notwithstanding anything to the contrary herein or In any agreement between Pierce and Buyer, IN NO EVENT SHALL PIERCE. BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, SPECIAL, INDIRECT, OR PUNITIVE DAMAGES WHATSOEVER, WHETHER ARISING OUT OF BREACH OF CONTRACT, WARRANTY, TORT .(INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR OTHER THEORY OF LAW OR EQUITY, WITH RESPECT TO VEHICLES OR OTHER PRODUCTS SOLD BY PIERCE, OR THEIR OPERATION OR FAILURE TO OPERATE, OR ANY. DEFECTS THEREIN, OR ANY UNDERTAKINGS, ACTS .OROMISSIONS RELATED THERETO; REGARDLESS OF WHETHER PIERCE HAS BEEN INFORMED OF THE POSSIBILITY OF ANY SUCH DAMAGES. Without limiting the generality of the foregoing, Pierce specifically dlsciaims any liability for property or personal injury damages, penalties, damages for lost profits or revenues, loss of vehicles or products or any associated equipment, cost of substitute vehicles or products, down -time, delay damages, any other types of economic loss, or for any claims by any third . party for any such damages. Note: Any Surety Bond, d a part of the sale of the vehicle as to which this limited warranty is provided, applies only to this Pierce Basic One Year Limited Warranty for such vehicle, and not to other warranties made by Pierce in a separate document (if any) or to the warranties (Y any) made by any in anulaaturer (other than Pierce) of any part, component, attachment or accessory that is Incorporated Into or attached to the vehicle. TheTAKA Front independent Suspension and Steering coverage: Gears shall be free from defects in material and workmanship. The date of the original purchase invoice (issued when the Warranty Begins: product ships from the factory). Warranty Period Three (3) Years -or- Ends After. 30,000 Miles conditions and Excluslons: This limited warranty excludes brake pads, brake rotors, seal See Also boots and shock absorbers. Paragraphs 2 thru 4 This limited warranty shall apply only if the product Is properly maintained in accordance with Pierce's maintenance instructions and manuals and is used in service which is normal to the particular model. Normal service means service which does not subject the product to stresses or impacts greater than normally result from careful use. If the Buyer discovers a defect or nonconformity, it must notify Pierce in writing within thirty (30) days after the dale of discovery, but in any event prior to the expiration of the warranty period. THIS LIMITED WARRANTY MAY NOT BE ASSIGNED OR OTHERWISE TRANSFERRED BY THE BUYER TO ANY SUBSEQUENT USER OR PURCHASER OR TO ANY OTHER PERSON OR ENTITY. 12/16/2013 WA0050 Notwithstanding anything to the contrary herein,. Pierce makes no warranty whatsoever as to: (a) any Integral parts, components, attachments or trade accessories of or to the product, that are not manufactured by Pierce, Including but not limited to engines; transmissions, drivellnes, axles, water pumps and generators; with respect to all such parts, . components, attachments and accessories,. Pierce shag' assign. to: Buyer the applicable warranties, If any, made by the respective manufacturers thereof; (b) any vehicle, chassis,, or component. part, attachment or accessory damaged by misuse, neglect, Ore, exposure to severe environmental or chemical conditions, acidic environment. Improper maintenance, accident, crash, or force majeure such as natural disaster, lightning, earthquake, windstorm, hail,: flood, war or riot; (c) any vehicle, chassis or component. part, attachment or accessory that has tieen repaired, altered or assembled In any way by any person or entity other than Pierce which, in the sole judgment. of Pierce, adversely affects the performance, stability or purpose for which it was manufactured; or (d) products or parts which may In the ordinary course wear out and have .tobe replaced during the warranty period, including, but not fimited to, Ores, fluids, gaskets and light bulbs. Pierce assumes no responsibility for the assembly of its pads or subassemblies into finishing products or vehicles unless the assembly Is performed by Pierce. The original purchaser may void this warranty in part or in its entirely if the product is repaired or replaced (a) without prior written approval of the Pierce Customer Service Department; or (b) at a facility which has not been approved. by Pierce as to technical capability. Any repairs, modifications; alterations or aftermarket parts added after manufacture without the authorization of Pierce may void this warranty. 2 DISCLAIMERS OF WARRANTIES THE WARRANTY SET FORTH IN PARAGRAPH 1 I THE SOLE AND EXCLUSIVE WARRANTY GIVEN BY PIERCE. PIERCE HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES. WHETHER EXPRESS, IMPLIED OR STATUTORY. INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY,. ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, AND ANY WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE. 3, BUYER'S EXCLUSNE REMEDY. If the product falls to conform to the warranty set forth In paragraph 1 during the warranty .period, and such nonconformity is not duo to misuse; neglect. accident or Improper maintenance, Buyer must noth Pierce within the time period spectfed in paragraph 1, and shag make the product available for Inspection by Pierce or its designated agent.. At the request of Pierce, . any allegedly defective product shall be,returned to Pierce by Buyer for examination and/or repair. Buyer shall be responsible for the cost of such transportation, and for risk of loss of or damage to the product during transportation. Within a reasonable time. Fierce shall repair or replace (al Pierces option and expense). any nonconforming or defective parts. Repair or replacement shall be,made only by a. facility approved in advance in writing by Pierce. THIS REMEDY .SHALL BE THE EXCLUSIVE AND SOLE REMEDY FOR ANY BREACH OF WARRANTY. 4 EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAGES. Notwithstanding anything to the contrary herein or In any agreement between Pierce and Buyer, IN NO EVENT SHALL PIERCE. BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, SPECIAL, INDIRECT, OR PUNITIVE DAMAGES WHATSOEVER, WHETHER ARISING OUT OF BREACH OF CONTRACT, WARRANTY, TORT .(INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR OTHER THEORY OF LAW OR EQUITY, WITH RESPECT TO VEHICLES OR OTHER PRODUCTS SOLD BY PIERCE, OR THEIR OPERATION OR FAILURE TO OPERATE, OR ANY. DEFECTS THEREIN, OR ANY UNDERTAKINGS, ACTS .OROMISSIONS RELATED THERETO; REGARDLESS OF WHETHER PIERCE HAS BEEN INFORMED OF THE POSSIBILITY OF ANY SUCH DAMAGES. Without limiting the generality of the foregoing, Pierce specifically dlsciaims any liability for property or personal injury damages, penalties, damages for lost profits or revenues, loss of vehicles or products or any associated equipment, cost of substitute vehicles or products, down -time, delay damages, any other types of economic loss, or for any claims by any third . party for any such damages. Note: Any Surety Bond, d a part of the sale of the vehicle as to which this limited warranty is provided, applies only to this Pierce Basic One Year Limited Warranty for such vehicle, and not to other warranties made by Pierce in a separate document (if any) or to the warranties (Y any) made by any in anulaaturer (other than Pierce) of any part, component, attachment or accessory that is Incorporated Into or attached to the vehicle. R. H. SHEPPARD CO., INC. 101 Philadelphia St. Hanover, PA 17331 Pierce Manufacturing Inc. 2600 American Drive Appleton, WI 54912 LIMITED WARRANTY: The R. H. Sheppard Co. Inc., ( "Sheppard') warrants all MI l0PKG1 and M I OSAUI steering gears manufactured and sold to Pierce Manufacturing Inc. C' Pierce') for application on Pierce TAK -4 equipped vehicles to be free from defects of workmanship and material under normal use and service for a period of thirty six months from the in service date of the vehicle to its original owner. Vehicle applications where Sheppard product is used require an application approval before production build. If Pierce uses Sheppard product for any purpose or application which has not been approved by Sheppard in advance, including aftermarket devices (defined as a device added to the steering system directly or indirectly affecting the performance or operation of the Sheppard product in its approved application) not tested and approved by Sheppard this limited warranty SHALL NOT APPLY AND SHALL BE VOID. SHEPPARD MAKES NO OTHER WARRANTY, EITHER SHEPPARD SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL, SPECIAL OR INDIRECT DAMAGES OR FOR LOSS OR DAMAGE DIRECTLY OR INDIRECTLY ARISING FROM THE USE OF A PRODUCT. Pierce expressly acknowledges its obligation to inform all users (customers) of the above disclaimer. CONDITIONS: Claims under this Limited Warranty may only be made by Pierce. In no event shall Sheppard be held liable for warranty charges by unauthorized persons. No allowance will be made for repairs or alterations, unless made with the written consent of Sheppard. Authorized Pierce dealers shall be the only authorized repair facility for Sheppard products applied to Pierce vehicles. Any warrantable repair made under this Limited Warranty must be made on or before 36 months of the in- service date for the Product to which the claim relates. Sheppard shall not be liable for claims made after such date. Sheppard product fitted to Pierce vehicles that are repaired at a repair facility other than an authorized Pierce dealer within the warranty period will be considered for payment under the guidelines of this agreement only by joint written consideration of Sheppard and Pierce warranty departments. It shall be the responsibility of the Pierce warranty department to notify Sheppard if and when this situation occurs. Sheppard will not be held responsible for damage to other steering components such as but not limited to pumps and reservoirs due to improper adjustment of steering gear relief plungers. Vehicle downtime and towing will not be considered under warranty. REMEDIES: The sole and exclusive remedy of Pierce for Sheppard's breach of the foregoing warranty is limited to the return and repair or reimbursement as follows: f', i X, /' R. H. SHEPPARID CO., INC. WARRANTY Pierce Manufacturing Inc. Page 2 Warranty Support: In support of the Pierce dealer network, Sheppard will provide a toll -free "Hotline" service to assist in the diagnosis and troubleshooting of steering problems. The R. H. Sheppard Co., Inc. Field Service Department can be reached at 1- 800 -274 -7437 for assistance. Sheppard will require that Pierce dealers contact this toll -free "Hotline" for approval before product is removed from a vehicle in a warranty situation. When contacted regarding a warranty situation, the Sheppard representative will provide an authorization number for removal of the product. This Returned Goods Authorization (RGA) number must be included in all warranty correspondence and attached to all returned goods. .Procedure: In the event of a warranty situation, the servicing dealer shall contact the Sheppard Hotline and receive an RGA number before replacing any steering gear. For MI l OPKG1 and M 1 I OSAUI steering gear models, the dealer will first obtain an RGA number from Sheppard, and then order the replacement gear from Pierce. Replacement MI IOPKGI and MI 10SAU1 steering gears shall be shipped from Pierce once those models are in full production. A warranty claim for both parts and labor will then be generated by the dealer and sent to Pierce. After reviewing the claim, Pierce will submit into Sheppard for reimbursement. Parts Reimbursement: Sheppard agrees to reimburse Pierce at Pierce's purchase price plus 30% mark -up for parts found to be defective within the warranty period. Parts being returned for warranty consideration shall be sent to the R. H. Sheppard Company, 447 E. Middle St., Hanover, PA 17331 ATTN: Warranty Dept. Sheppard's determination as to whether the part is covered by the foregoing warranty is final and conclusive. Sheppard requires the return of complete steering gears only. Individual seals replaced under warranty should not be returned unless specifically requested by Sheppard. All Rarts being returned for warrant' consideration must be clearly tagged with all submitted without prior authorization are subject to rejection under this agreement. Labor: Labor to repair Sheppard product found to be defective within the warranty period will be reimbursed at not more than 10 hours per vehicle. Labor shall be reimbursed at the rate of $85.00 USD per hour for MI IOPGKI and MI IOSAUI steering gears. Freight: Pierce will collect MI IOPGKI and MI 10SAU1 warranty material at a designated collection point. Inbound freight to the Pierce collection point will be the responsibility of Pierce. All warranty material should be returned from the Pierce collection point to R. H. Sheppard Co. Freight Collect by a Sheppard - specified common carrier based on location of the Pierce collection point.. Sheppard does not require the return of failed seals. Any freight charges incurred for the return of seals will be the responsibility of Pierce. Parts returned for warranty consideration without prior authorization are subject to rejection under this agreement and may be subject to a charge back of inbound freight charges. Parts rejected under this warranty will be returned to Pierce Freight Collect or scrapped by Sheppard at Pierce's discretion. R. H. SHEPPARD CO., INC. WARRANTY Pierce Manufacturing Inc. Page 3 Outside Purchases: Pierce authorized dealers shall be the only outlet for repair, warranty service and parts for Sheppard products applied to Pierce vehicles. Sheppard will not be responsible for consumables such as hoses, belts, fluids, fittings or miscellaneous shop material that may be required for the repair of the product. Warranty Documentation: Warranty credit memos will be issued monthly to the Pierce Warranty Department. Monthly credit memos will include (1) claim number; (2)-part number; (3) parts reimbursement; (4) labor reimbursement; (5) any applicable Pierce reference number and; (6) reason for rejection or acceptance of the claim. Credit memos will be issued in U.S. funds. Debits for warranty claims will not be accepted under this agreement.. Claim disposition will constitute the final and conclusive resolution of warranty claims. Parts Retention: Sheppard will retain parts submitted for warranty consideration for a period of sixty (60) days for any material found to be rejected for warranty. Sheppard will notify Pierce within sixty (60) days of receipt of Sheppard's determination as to whether any such part is covered by this warranty. Warranty reimbursement will be issued within thirty days of receipt of material at Sheppard. Good -Will Requests: Good -Will requests will be considered jointly between Sheppard and Pierce for equitable compensation. RECALLS: Sheppard retains the right to review information regarding federal motor vehicle recall and /or product repair programs if Sheppard products fitted to Pierce vehicles are alleged to be non- compliant with federal motor vehicle safety standards. Sheppard retains the right to review any claims of product defect or non - compliance before participating in reimbursement of expenses incurred as a result of alleged non - compliance or defect of its products. Sheppard agrees to negotiate in good faith for the reimbursement of expenses incurred by Pierce for all administrative, material and labor cost and expense associated with any recall where Sheppard product is found to be defective or non - compliant with federal motor vehicle standards. MISCELLANEOUS: This writing constitutes the full complete and final statement of Sheppard's limited warranty for M110PKG1 and M1lOSAU1 products sold to Pierce. All prior oral or written correspondence, test data, negotiations, representations, understandings and the like regarding products are merged in this writing and extinguished by it. This limited warranty may not be altered, amended extended or modified except by a writing signed by the President or Vice President of Sheppard. No employee, vendor, dealer, distributor or other representative of Sheppard has authority to make statements to extend, expand, alter or amend the terms of this Limited Warranty. Sheppard expressly disclaims any statements contrary to the Limited Warranty. Sheppard's failure at any time to enforce any of the terms and conditions stated herein shall not constitute a waiver of any provisions herein. This Limited Warranty shall be governed by and construed in accordance with the laws of the Commonwealth of Pennsylvania. R. H. SHEPPARD CO., INC. WARRANTY Pierce Manufacturing Inc. Page 4 Any legal actions which may arise as a result of disputes, controversies or claims arising out of or related to this limited warranty shall be in such forum as Sheppard and Pierce shall agree, or, in the absence of agreement, in a court of appropriate jurisdiction other than in the county in which either party is located. This Limited Warranty shall not be assigned by Pierce.. COOPERATIVE EFFORT: Sheppard and Pierce agree to work cooperatively toward expanding this warranty coverage to a period of sixty months from the in service date. These cooperative efforts shall focus on examining the effects of increased heat generated by 2007 model engines and its impact on the entire power steering system. AGREEMENT: This agreement is effective April 3, 2006 and may be modified by mutual agreement between Sheppard and Pierce of a signed amendment to be attached to the original Limited Warranty. There are no third party beneficiaries to this Limited Warranty. This warranty agreement applies to Pierce authorized dealers only. It does not encompass any special arrangements that Pierce may now have or that Pierce may enter into, with any other segments of the trucking industry. This warranty agreement does not apply to non - conforming product removed at Pierce assembly plants. This Limited Warranty agreement between the R. H. Sheppard Co., Inc and Pierce Manufacturing Inc. may be terminated by either party with thirty days written notice prior to termination. Signed at Pierce Manufacturing Inc., Appleton, WI this day of 32006. R. H. SHEPPARD CO., INC. PIERCE MANUFACTURING INC. Authorized Signature Authorized Signature Title Title Fire and Rescue Apparatus Lifetime Fifty (50) Year Structural Integrity Custom Chassis Frame Limited Warranty 1. LIMITED WARRANTY Subject to the fimitations and exclusions set forth below, Pierre Manufacturing: provides the following warranty to the Buyer: This limited warranty shall apply only if the product is properly maintained in accordance with Pierce's maintenance instructions and manuals and is used in service which is normal to the particular model. Normal service means service which does not subject the product to stresses or Impacts greater than normally result from careful use. If the Buyer discovers a defect or nonconformity, it must notify Pierce in writing within thirty (30) days after the date of discovery, but in any event prior to the expirapon of me warranty period. THIS LIMITED WARRANTY MAY NOT BE ASSIGNED OR OTHERWISE TRANSFERRED BY THE BUYER TO ANY SUBSEQUENT USER OR PURCHASER OR TO ANY OTHER PERSON OR ENTITY. 2/812010 WA0013 Notwithstanding anything to the contrary herein, Pierce makes no warranty whatsoever as to: (a) any integral parts, components, attachments or trade accessories of or to the product that are not manufactured by Pierce, Including but not limited to engines, transmissions, drivellnes, axles, water pumps and generators: with respect to all such parts, components, attachments and accessories, Pierce shall assign to Buyer the applicable warranties, If any, made by the respective manufacturers thereof; (b) any vehicle, chassis, or component, part, attachment or accessory damaged by misuse, neglect, fire, exposure to severe environmental or chemical conditions, acidic environment, Improper maintenance, accident, crash, or force majeure such as natural disaster, lightning, earthquake, windstorm, . hail, flood; war or riot (c) any vehicle, chassis or component, part, attachment or accessory that has been repaired, . altered or assembled in any way by any person or entity other than Pierce which, in the sole judgment of Pierce, adversely affects theperformanoe, stabilityor purpose for which it was manufactured;. or (d) products or parts which may In the ordinary course wear out and have to be replaced during the warranty period, including, but not limited to „ tires, fluids, gaskets and light. bulbs. Pierce assumes no responsibility for the assembly of its parts or subassemblies into finishing products or vehicles unless the assembly is performed by Pierce. The original purchaser may void this warranty in part or in its entirety if the product is repaired or replaced (a) without prior written approval of the Pierce Customer Service Department: or (b) at a facility which has not been approved by Pierce is to technical capability. Any repairs, modifications, alterations or aftermarketparts added after manufacture without the authorization of Pierce may void this warranty: 2. DISCLAIMERS OF WARRANTIES THE WARRANTY SET FORTH IN PARAGRAPH 1 IS THE SOLE AND EXCLUSIVE WARRANTY GIVEN BY PIERCE. PIERCE HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, _ INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY, ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, AND ANY WARRANTIES ARISING FROM COURSE OF DEALING OR: USAGE .OF TRADE'. 3. BUYER'S EXCLUSIVE REMEDY. If the product fails to conform to the warranty set forth In paragraph 1 during the warranty period and such nonconformity is not due to misuse, neglect accident or improper maintenance; Buyer must notify Pierce within the ti me period specified in paragraphd, and shall make the product available for Inspection by Pierce or its designated' a gent. At the request of Piero e, any allegedly defective product shall be returned to Pierce by Buyer for examination andfor repair. Buyer shall be responsible forthe cost of such transportation, and for risk ofioss of or damage tolthe product during transportation. Within a reasonable time; Pierce shall repair or replace (at Pierre's option and expense) any nonconforming or detective parts. Repair or replacement shall be made only by a facility approved in advance in writing, by Pierce. THIS REMEDVSHAIL BE THE EXCLUSIVE AND SOLE REMEDY FOR ANY BREACH OF WARRANTY. 4 EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAG ES. Notwithstanding anything to the contrary herein or in any agreement between Pierce and Buyer, IN NO EVENT SHALL PIERCE BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, SPECIAL. INDIRECT. OR PUNITIVE DAMAGES, WHATSOEVER. _ WHETHER ARISING OUT OF BREACH OF CONTRACT. WARRANTY, TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR OTHER THEORY OF LAW OR EQUITY, WITH RESPECT TO VEHICLES OR OTHER PRODUCTS SOLD BY PIERCE, OR THEIR OPERATION OR FAILURE TO OPERATE, OR ANY DEFECTS THEREIN, OR ANY UNDERTAKINGS, ACTS OR. OMISSIONS RELATED THERETO, REGARDLESS OF WHETHER PIERCE HAS BEEN INFORMED OF THE POSSIBILITY OF ANY SUCH DAMAGES. Without limiting the generality of the foregoing, Pierce specifically disclaims any liability for property or personal injury damages, penalties, damages for lost profits or revenues, loss of vehicles or products or any asspoiated equipment cost of substitute vehicles or products, dawn4irne, delay damages, any other types of economic loss, or for any claims by any third party for any such damages. Note: Any Surety Bond, if a. part of the sale of the vehide a$ to which this limited warranty is provided, applies only to this Pierce Basic One Year Limited Warranty for such vehicle, and not do other warranties made by Pierce in a separate document (If.any) or to the warranties (if any) made by any manufadurer (other than Pieroe) of any part. component, attachment or accessory that is incorporated into or attached to the vehicle. Custom chassis frame rail manufactured by Pierce shall be Coverage: tree from defects in material and workmanship The date of the original purchase Invoice (issued when the Warranty Begins: product ships from the factory). Warranty Period Fifty (50) Years Ends After. (Expected Life of Apparatus) Conditions and EBcluslons: This warranty does not apply to damage caused by corrosion. See Also Paragraphs, 2 thru 4 This limited warranty shall apply only if the product is properly maintained in accordance with Pierce's maintenance instructions and manuals and is used in service which is normal to the particular model. Normal service means service which does not subject the product to stresses or Impacts greater than normally result from careful use. If the Buyer discovers a defect or nonconformity, it must notify Pierce in writing within thirty (30) days after the date of discovery, but in any event prior to the expirapon of me warranty period. THIS LIMITED WARRANTY MAY NOT BE ASSIGNED OR OTHERWISE TRANSFERRED BY THE BUYER TO ANY SUBSEQUENT USER OR PURCHASER OR TO ANY OTHER PERSON OR ENTITY. 2/812010 WA0013 Notwithstanding anything to the contrary herein, Pierce makes no warranty whatsoever as to: (a) any integral parts, components, attachments or trade accessories of or to the product that are not manufactured by Pierce, Including but not limited to engines, transmissions, drivellnes, axles, water pumps and generators: with respect to all such parts, components, attachments and accessories, Pierce shall assign to Buyer the applicable warranties, If any, made by the respective manufacturers thereof; (b) any vehicle, chassis, or component, part, attachment or accessory damaged by misuse, neglect, fire, exposure to severe environmental or chemical conditions, acidic environment, Improper maintenance, accident, crash, or force majeure such as natural disaster, lightning, earthquake, windstorm, . hail, flood; war or riot (c) any vehicle, chassis or component, part, attachment or accessory that has been repaired, . altered or assembled in any way by any person or entity other than Pierce which, in the sole judgment of Pierce, adversely affects theperformanoe, stabilityor purpose for which it was manufactured;. or (d) products or parts which may In the ordinary course wear out and have to be replaced during the warranty period, including, but not limited to „ tires, fluids, gaskets and light. bulbs. Pierce assumes no responsibility for the assembly of its parts or subassemblies into finishing products or vehicles unless the assembly is performed by Pierce. The original purchaser may void this warranty in part or in its entirety if the product is repaired or replaced (a) without prior written approval of the Pierce Customer Service Department: or (b) at a facility which has not been approved by Pierce is to technical capability. Any repairs, modifications, alterations or aftermarketparts added after manufacture without the authorization of Pierce may void this warranty: 2. DISCLAIMERS OF WARRANTIES THE WARRANTY SET FORTH IN PARAGRAPH 1 IS THE SOLE AND EXCLUSIVE WARRANTY GIVEN BY PIERCE. PIERCE HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, _ INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY, ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, AND ANY WARRANTIES ARISING FROM COURSE OF DEALING OR: USAGE .OF TRADE'. 3. BUYER'S EXCLUSIVE REMEDY. If the product fails to conform to the warranty set forth In paragraph 1 during the warranty period and such nonconformity is not due to misuse, neglect accident or improper maintenance; Buyer must notify Pierce within the ti me period specified in paragraphd, and shall make the product available for Inspection by Pierce or its designated' a gent. At the request of Piero e, any allegedly defective product shall be returned to Pierce by Buyer for examination andfor repair. Buyer shall be responsible forthe cost of such transportation, and for risk ofioss of or damage tolthe product during transportation. Within a reasonable time; Pierce shall repair or replace (at Pierre's option and expense) any nonconforming or detective parts. Repair or replacement shall be made only by a facility approved in advance in writing, by Pierce. THIS REMEDVSHAIL BE THE EXCLUSIVE AND SOLE REMEDY FOR ANY BREACH OF WARRANTY. 4 EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAG ES. Notwithstanding anything to the contrary herein or in any agreement between Pierce and Buyer, IN NO EVENT SHALL PIERCE BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, SPECIAL. INDIRECT. OR PUNITIVE DAMAGES, WHATSOEVER. _ WHETHER ARISING OUT OF BREACH OF CONTRACT. WARRANTY, TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR OTHER THEORY OF LAW OR EQUITY, WITH RESPECT TO VEHICLES OR OTHER PRODUCTS SOLD BY PIERCE, OR THEIR OPERATION OR FAILURE TO OPERATE, OR ANY DEFECTS THEREIN, OR ANY UNDERTAKINGS, ACTS OR. OMISSIONS RELATED THERETO, REGARDLESS OF WHETHER PIERCE HAS BEEN INFORMED OF THE POSSIBILITY OF ANY SUCH DAMAGES. Without limiting the generality of the foregoing, Pierce specifically disclaims any liability for property or personal injury damages, penalties, damages for lost profits or revenues, loss of vehicles or products or any asspoiated equipment cost of substitute vehicles or products, dawn4irne, delay damages, any other types of economic loss, or for any claims by any third party for any such damages. Note: Any Surety Bond, if a. part of the sale of the vehide a$ to which this limited warranty is provided, applies only to this Pierce Basic One Year Limited Warranty for such vehicle, and not do other warranties made by Pierce in a separate document (If.any) or to the warranties (if any) made by any manufadurer (other than Pieroe) of any part. component, attachment or accessory that is incorporated into or attached to the vehicle. .x Fire and Fescue Apparatus Three (3) Year Material and Workmanship Meritor Wabco ABS Brake System Limited Warranty 1. LIMITED WARRANTY Subject to the limitations and exclusions set forth below. Pierce Manufacturing provides the following warranty to the Buyer. This linated warranty shall apply only if the product Is property maintained in accordance with Pierce's maintenance Instructions and manuals and -is used in service which is normal to the particular model. Normal service means service which does not subject the product to stresses or impacts greater than normally result from careful use. If the Buyer discovers a defect or nonconformity, it must notify Pierce in writing within thirty (30) days after the date of discovery, but in any event prior to the expiration of the warranty period. THIS LIMITED WARRANTY MAY NOT BE ASSIGNED OR OTHERWISE TRANSFERRED BY THE BUYER TO ANY SUBSEQUENT USER OR PURCHASER OR TO ANY OTHER PERSON OR ENTITY. 2/2512013 WA0232 Notwithstanding anything to the contrary herein, Pierce makes no warranty whatsoever as to: (a) any integral parts, components, attachments or trade accessories of or to the product that are not manufactured by Pismo, including but not limited to engines, transmisstom, . drivelines, axles, water 1pumps and generators; with respect to an such parts. componenls,attachments and accessories, Pierce shad assign to Buyer the applicable warranties, if any, made by the respective manufacturers thereof; (b) any vehicle, chassis, or component. part attachment or accessory damaged by misuse, neglect, fire, exposure to severe environmental: or chemical conditions, addic environment, Improper maintenance, accident, crash, or force majeurs such as natural disaster, lightning, earthquake. windstorm,: hail, flood, war or riot; (c) any vehicle, chassis or component, part, attachment or accessory that has been repaired, altered or assembled in any way by any person or entity other than Pierce . which. In the sale judgment of Pierce, adversely affects the performance, stability or purpose for which it was manufactured; or (d) products or parts which may in the ordinary course wear out and have to be replaced during the warranty period, including, but not limited to, tires, fluids, gaskets and fight bulbs. Pierce assumes no responsibility for the assembly of Its parts . or subassemblies Into finishing products or vehicles unless the assembly Is performed by Pierce. The original purchaser may void this warranty in part or in its entirely if the product is repaired or replaced (a) without prior written approvalof. the Pierce Customer Service Department; or (b) at a facility which has not been approved by Pierce as to technical capability. Any repairs, modifications, alterations or aftermarket parts added after manufacture without the authorization of Pierce may void this warranty. 2. DISCLAIMERS OF WARRANTIES THEE WARRANTY SET FORTH IN PARAGRAPH ,1 IS THE SOLE AND `EXCLUSIVE WARRANTY GIVEN BY PIERCE. PIERCE HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES. WHETHER- EXPRESS, IMPLIED OR STATUTORY, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY, ANY WARRANTY OF FITNESS FOR PARTICULAR PURPOSE, AND ANY WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE. 3. BUYER'S EXCLUSIVE REMEDY. If the product fails to conform to the warranty set forth in paragraph 1 during the warranty period, and such nonconformity is not due to misuse, neglect, accident or improper maintenance, Buyer must notify Pierce within the time.period specified in paragraph 1„ and shall make the product available for inspection by Pierce or its designated agent. At the request of Pierce, any allegedly defective product shall be returned to Pierce by Buyer for examination and/or repair. Buyer shag be responsible for the cost of such transportation, and for risk of loss of or damage to the product during transportation. Within a reasonable time, Pierce shall repair or replace (at Plerce's option and expense) any nonconforming or defective parts. Repair or replacement shall be made only by facility approved In advance in writing by Pierce. THIS REMEDY SHALL BE THE EXCLUSIVE AND SOLE REMEDY FOR ANY BREACH OF WARRANTY. 4, EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAGES. Notwithstanding anything.to the contrary herein or in any agreement between Pierce and Buyer, IN NO EVENT SHALL PIERCE BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, SPECIAL, INDIRECT, OR PUNITIVE DAMAGES WHATSOEVER, WHETHER ARISING OUT OF BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR OTHER THEORY OF LAW OR EQUITY, WITH RESPECT TO VEHICLES OR OTHER PRODUCTS SOLD BY PIERCE, OR THEIR OPERATION OR FAILURE: TO OPERATE, OR ANY DEFECTS THEREIN, OR ANY UNDERTAKINGS, ACTS OR OMISSIONS RELATED THERETO, . REGARDLESS OF WHETHER PIERCE HAS BEEN INFORMED OF THE POSSIBILITY OF ANY-SUCH DAMAGES. Without limiting the generality of the foregoing; Pierce specifically disclaims any liability for property or personal injury damages, penalties, damages.forlost profits or revenues, loss of vehicles or products or any associated equipment, cost of substitute vehicles or products, down -time, delay damages, any other types of economic loss, or for any claims by any third parry for any such damages. Note: Any Surety Bond, if a part of the sale of the vehicle as to which this limited warranty is provided, applies only to this Pierce Basic One Year Limited Warranty for such vehicle, and motto other warranties made by Pierce In a separate document (if any) or (o the warran0es,(ifany) made by any manufacturer (other than Pierce) of any part, component, attachment or accessory that is incorporated into or attached to the vehicle. The Meritor Wabco ABS brake system shag be covered by Coverage: Mentor Wabco as Indicated In the attached Mentor Wabco warranty coverage description The date of the original purchase irwoice (issued when the Warranty Begins:. product ships from the factory). Warranty Period Three (3) Year Ends After Conditions and ' Exclusions: The exclusions listed in the attached Mentor Wabco warranty See Also description shall apply. Paragraphs 2 thru 4 This linated warranty shall apply only if the product Is property maintained in accordance with Pierce's maintenance Instructions and manuals and -is used in service which is normal to the particular model. Normal service means service which does not subject the product to stresses or impacts greater than normally result from careful use. If the Buyer discovers a defect or nonconformity, it must notify Pierce in writing within thirty (30) days after the date of discovery, but in any event prior to the expiration of the warranty period. THIS LIMITED WARRANTY MAY NOT BE ASSIGNED OR OTHERWISE TRANSFERRED BY THE BUYER TO ANY SUBSEQUENT USER OR PURCHASER OR TO ANY OTHER PERSON OR ENTITY. 2/2512013 WA0232 Notwithstanding anything to the contrary herein, Pierce makes no warranty whatsoever as to: (a) any integral parts, components, attachments or trade accessories of or to the product that are not manufactured by Pismo, including but not limited to engines, transmisstom, . drivelines, axles, water 1pumps and generators; with respect to an such parts. componenls,attachments and accessories, Pierce shad assign to Buyer the applicable warranties, if any, made by the respective manufacturers thereof; (b) any vehicle, chassis, or component. part attachment or accessory damaged by misuse, neglect, fire, exposure to severe environmental: or chemical conditions, addic environment, Improper maintenance, accident, crash, or force majeurs such as natural disaster, lightning, earthquake. windstorm,: hail, flood, war or riot; (c) any vehicle, chassis or component, part, attachment or accessory that has been repaired, altered or assembled in any way by any person or entity other than Pierce . which. In the sale judgment of Pierce, adversely affects the performance, stability or purpose for which it was manufactured; or (d) products or parts which may in the ordinary course wear out and have to be replaced during the warranty period, including, but not limited to, tires, fluids, gaskets and fight bulbs. Pierce assumes no responsibility for the assembly of Its parts . or subassemblies Into finishing products or vehicles unless the assembly Is performed by Pierce. The original purchaser may void this warranty in part or in its entirely if the product is repaired or replaced (a) without prior written approvalof. the Pierce Customer Service Department; or (b) at a facility which has not been approved by Pierce as to technical capability. Any repairs, modifications, alterations or aftermarket parts added after manufacture without the authorization of Pierce may void this warranty. 2. DISCLAIMERS OF WARRANTIES THEE WARRANTY SET FORTH IN PARAGRAPH ,1 IS THE SOLE AND `EXCLUSIVE WARRANTY GIVEN BY PIERCE. PIERCE HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES. WHETHER- EXPRESS, IMPLIED OR STATUTORY, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY, ANY WARRANTY OF FITNESS FOR PARTICULAR PURPOSE, AND ANY WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE. 3. BUYER'S EXCLUSIVE REMEDY. If the product fails to conform to the warranty set forth in paragraph 1 during the warranty period, and such nonconformity is not due to misuse, neglect, accident or improper maintenance, Buyer must notify Pierce within the time.period specified in paragraph 1„ and shall make the product available for inspection by Pierce or its designated agent. At the request of Pierce, any allegedly defective product shall be returned to Pierce by Buyer for examination and/or repair. Buyer shag be responsible for the cost of such transportation, and for risk of loss of or damage to the product during transportation. Within a reasonable time, Pierce shall repair or replace (at Plerce's option and expense) any nonconforming or defective parts. Repair or replacement shall be made only by facility approved In advance in writing by Pierce. THIS REMEDY SHALL BE THE EXCLUSIVE AND SOLE REMEDY FOR ANY BREACH OF WARRANTY. 4, EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAGES. Notwithstanding anything.to the contrary herein or in any agreement between Pierce and Buyer, IN NO EVENT SHALL PIERCE BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, SPECIAL, INDIRECT, OR PUNITIVE DAMAGES WHATSOEVER, WHETHER ARISING OUT OF BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR OTHER THEORY OF LAW OR EQUITY, WITH RESPECT TO VEHICLES OR OTHER PRODUCTS SOLD BY PIERCE, OR THEIR OPERATION OR FAILURE: TO OPERATE, OR ANY DEFECTS THEREIN, OR ANY UNDERTAKINGS, ACTS OR OMISSIONS RELATED THERETO, . REGARDLESS OF WHETHER PIERCE HAS BEEN INFORMED OF THE POSSIBILITY OF ANY-SUCH DAMAGES. Without limiting the generality of the foregoing; Pierce specifically disclaims any liability for property or personal injury damages, penalties, damages.forlost profits or revenues, loss of vehicles or products or any associated equipment, cost of substitute vehicles or products, down -time, delay damages, any other types of economic loss, or for any claims by any third parry for any such damages. Note: Any Surety Bond, if a part of the sale of the vehicle as to which this limited warranty is provided, applies only to this Pierce Basic One Year Limited Warranty for such vehicle, and motto other warranties made by Pierce In a separate document (if any) or (o the warran0es,(ifany) made by any manufacturer (other than Pierce) of any part, component, attachment or accessory that is incorporated into or attached to the vehicle. Fire and Rescue Apparatus Ten (10) Year Structural Integrity Custom Cab Limited Warranty 1. LIMITED WARRANTY Subject to the limitations and exclusions set forth below. Pierce Manufacturing, provides the following: warranty to the Buyer. This limited warranty shall apply only if the product is properly maintained in accordance with Pierce's maintenance!instructions and manuals and is used in service which is normal to the particular model. Normal service means service which does not subject the product to stresses or impacts greater then normally result from careful use. If the Buyer discovers a defect or nonconformity, it must notify Pierce in writing within thirty (30) days after the date of discovery, but in any event prior to the expiration of the warranty period. THIS LIMITED WARRANTY MAY NOT BE ASSIGNED OR OTHERWISE TRANSFERRED BY THE BUYER TO ANY SUBSEQUENT USER OR PURCHASER OR TO ANY OTHER PERSON OR ENTITY. 2/8/2010 WA0012 Notwithstanding anything to the contrary herein, Pierce makes no warranty whatsoever as to: (a) any integral parts, components, attachments or trade accessories of or to the product that are not manufactured by Pierce, including but not limited to engines, transmissions, drivelines, axles, water pumps and generators; with respect to all such parts, components, attachments and accessories, Pierce shall assign to Buyer the applicable warranties, if any, made by the respective manufacturers thereof; (b) any vehicle, chassis, or component, part, attachment or accessory damaged by misuse. neglect fire, exposure to severe environmental or chemical conditions, acidic environment, improper maintenance, accident, crash, or force maieure such as natural disaster, lightning, earthquake, windstorm, hail, flood, war or riot; (c) any vehicle, chassis or component, part, attachment or accessory that has been repaired, altered or assembled in any way by any person or entity other than Pierce which, in the sale judgment of Pierce, adversely affects the performance, stability or purpose for which it was manutwWred; or (d) products or parts which may In the ordinary course wear out and .have to be replaced during the warranty period, including, but not limited to, tires, fluids, gaskets and light bulbs. Pierce assumes no responsibility for the assembly of its parts or subassemblies into finishing products or vehicles unless the assemblyis performed by Pierce. The original purchaser may void this warranty in part or in Its entirety if the product is repaired or replaced (a) without prior written approval of the Pierce Customer Service Department; or (b) at a facility which has not been approved by Pierce as to technical capability. ,Any repairs, modifications, alterations or aftermarket parts added after manufacture without the authorization of Pierce may void this warranty. 2. DISCLAIMERS OF WARRANTIES THE WARRANTY SET FORTH IN PARAGRAPH IS THE SOLE AND EXCLUSIVE WARRANTY GIVEN BY PIERCE. PIERCE HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES. WHETHER EXPRESS. IMPLIED OR STATUTORY, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY. ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, AND ANY WARRANTIES' ARISING FROM COURSE OF DEALING OR USAGE OF TRADE. 3. BUYER'S EXCLUSIVE REMEDY. If the product fails to conform to the warranty set forth in paragraph 1 during the warranty period, and such nonconformity is not due to misuse, neglect, accident or improper maintenance; Buyer must notify Pierce within the time period specified in paragraph 1, and shall make the product available for inspection by Pierce or its designated agenL At the request of Pierce, any allegedly defective product shall be returned to Pierce by Buyer for examination andfor repair. .Buyer shall be responsible for the cost of such transportation, and for risk of loss of or damage to the product during transportation. Within a reasonable fine, Pierce shall repair or replace (at PtercVs option and expense) any nonconforming or defective parts. Repair or replacement shall be made only by a facility approved in advance in writing by Pierce. THIS REMEDY SHALL BE THE EXCLUSIVE AND SOLE REMEDY FOR ANY BREACH OF WARRANTY.. 4 EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAG ES, Notwithstanding anything to the contrary herein or in any agreement. between Pierce and Buyer, IN NO EVENT SHALL PIERCE BE LIABLE FOR ANY CONSEQUENTIAL„ INCIDENTAL, SPECIAL, INDIRECT, OR PUNITIVE_ DAMAGES WHATSOEVER. WHETHER ARISING OUT OF BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR OTHER THEORY OF LAW OR EQUITY, WITH RESPECT TO VEHICLES OR OTHER PRODUCTS SOLD BY PIERCE, OR THEIR OPERATION OR FAILURE TO OPERATE. OR ANY DEFECTS THEREIN. OR ANY UNDERTAKINGS. ACTS OR OMISSIONS RELATED THERETO, REGARDLESS OF WHETHER PIERCE HAS BEEN INFORMED OF THE POSSIBILITY OF ANY SUCH DAMAGES. Without limiting the generality of the foregoing, Pierce specifically disclaims any liability for property or personal Injury damages, penalties, damages for lost, profits or revenues, loss of vehicles or products or any associated equipment, cost of substitute vehicles or products, down -time, delay damages, any other types of economic loss, or for any claims by any third party for any such damages. Note:. Any Surety Bond,, if a part of the sale of the vehicle as to which this limited warranty is provided, applies only to this Pierce Basic One Year limited Warranty for such vehicle, and not. to other warranties made by Pierce in a separate document (if any) or to the warranties (if any) made by any manufacturer (other than Pierce) of any part, component attachment or accessory that is Incorporated into or attached to the vehicle. The Pierce Custom Cab shall be free from structural failures Coverage: caused by defects in material and workmanship The date of the original purchase Invoice (Issued when the Warranty Begins:. product ships from the factory). Warranty Period Ten (10) Years Ends After: -or. 100,000 Mlles Conditions and This warranty applies only to the cab tubular support and Exclusions: mounting structures and other structural components of the cab of the vehicle model, as Identified in the Pierce See Also specifications for the Fire and Rescue Apparatus. Paragraphs 2 thro 4 This warranty does not apply to damage caused by corrosion. This limited warranty shall apply only if the product is properly maintained in accordance with Pierce's maintenance!instructions and manuals and is used in service which is normal to the particular model. Normal service means service which does not subject the product to stresses or impacts greater then normally result from careful use. If the Buyer discovers a defect or nonconformity, it must notify Pierce in writing within thirty (30) days after the date of discovery, but in any event prior to the expiration of the warranty period. THIS LIMITED WARRANTY MAY NOT BE ASSIGNED OR OTHERWISE TRANSFERRED BY THE BUYER TO ANY SUBSEQUENT USER OR PURCHASER OR TO ANY OTHER PERSON OR ENTITY. 2/8/2010 WA0012 Notwithstanding anything to the contrary herein, Pierce makes no warranty whatsoever as to: (a) any integral parts, components, attachments or trade accessories of or to the product that are not manufactured by Pierce, including but not limited to engines, transmissions, drivelines, axles, water pumps and generators; with respect to all such parts, components, attachments and accessories, Pierce shall assign to Buyer the applicable warranties, if any, made by the respective manufacturers thereof; (b) any vehicle, chassis, or component, part, attachment or accessory damaged by misuse. neglect fire, exposure to severe environmental or chemical conditions, acidic environment, improper maintenance, accident, crash, or force maieure such as natural disaster, lightning, earthquake, windstorm, hail, flood, war or riot; (c) any vehicle, chassis or component, part, attachment or accessory that has been repaired, altered or assembled in any way by any person or entity other than Pierce which, in the sale judgment of Pierce, adversely affects the performance, stability or purpose for which it was manutwWred; or (d) products or parts which may In the ordinary course wear out and .have to be replaced during the warranty period, including, but not limited to, tires, fluids, gaskets and light bulbs. Pierce assumes no responsibility for the assembly of its parts or subassemblies into finishing products or vehicles unless the assemblyis performed by Pierce. The original purchaser may void this warranty in part or in Its entirety if the product is repaired or replaced (a) without prior written approval of the Pierce Customer Service Department; or (b) at a facility which has not been approved by Pierce as to technical capability. ,Any repairs, modifications, alterations or aftermarket parts added after manufacture without the authorization of Pierce may void this warranty. 2. DISCLAIMERS OF WARRANTIES THE WARRANTY SET FORTH IN PARAGRAPH IS THE SOLE AND EXCLUSIVE WARRANTY GIVEN BY PIERCE. PIERCE HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES. WHETHER EXPRESS. IMPLIED OR STATUTORY, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY. ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, AND ANY WARRANTIES' ARISING FROM COURSE OF DEALING OR USAGE OF TRADE. 3. BUYER'S EXCLUSIVE REMEDY. If the product fails to conform to the warranty set forth in paragraph 1 during the warranty period, and such nonconformity is not due to misuse, neglect, accident or improper maintenance; Buyer must notify Pierce within the time period specified in paragraph 1, and shall make the product available for inspection by Pierce or its designated agenL At the request of Pierce, any allegedly defective product shall be returned to Pierce by Buyer for examination andfor repair. .Buyer shall be responsible for the cost of such transportation, and for risk of loss of or damage to the product during transportation. Within a reasonable fine, Pierce shall repair or replace (at PtercVs option and expense) any nonconforming or defective parts. Repair or replacement shall be made only by a facility approved in advance in writing by Pierce. THIS REMEDY SHALL BE THE EXCLUSIVE AND SOLE REMEDY FOR ANY BREACH OF WARRANTY.. 4 EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAG ES, Notwithstanding anything to the contrary herein or in any agreement. between Pierce and Buyer, IN NO EVENT SHALL PIERCE BE LIABLE FOR ANY CONSEQUENTIAL„ INCIDENTAL, SPECIAL, INDIRECT, OR PUNITIVE_ DAMAGES WHATSOEVER. WHETHER ARISING OUT OF BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR OTHER THEORY OF LAW OR EQUITY, WITH RESPECT TO VEHICLES OR OTHER PRODUCTS SOLD BY PIERCE, OR THEIR OPERATION OR FAILURE TO OPERATE. OR ANY DEFECTS THEREIN. OR ANY UNDERTAKINGS. ACTS OR OMISSIONS RELATED THERETO, REGARDLESS OF WHETHER PIERCE HAS BEEN INFORMED OF THE POSSIBILITY OF ANY SUCH DAMAGES. Without limiting the generality of the foregoing, Pierce specifically disclaims any liability for property or personal Injury damages, penalties, damages for lost, profits or revenues, loss of vehicles or products or any associated equipment, cost of substitute vehicles or products, down -time, delay damages, any other types of economic loss, or for any claims by any third party for any such damages. Note:. Any Surety Bond,, if a part of the sale of the vehicle as to which this limited warranty is provided, applies only to this Pierce Basic One Year limited Warranty for such vehicle, and not. to other warranties made by Pierce in a separate document (if any) or to the warranties (if any) made by any manufacturer (other than Pierce) of any part, component attachment or accessory that is Incorporated into or attached to the vehicle. - Fire and Rescue Apparatus Ten (10) Year Pro -Rated Paint and Corrosion Custom Body Limited Warranty 1. LIMITED WARRANTY Subject to the limitations and exclusions set forth below, Pierce Manufacturing provides the following warranty to the Buyer. This limited warranty shall apply only if the product is properly maintained In accordance with Pterce's maintenance Instructions and manuals and is used in service which Is normal to the particular model. Normal service means service which does not subject the product to stresses or impacts greater than normally result from careful use. If the Buyer discovers a defect or nonconformity, it must notify Pierce in writing within thirty (30) days after the date of discovery, but in any event prior to the expiration of the warranty period. THIS LIMITED WARRANTY MAY NOT BE ASSIGNED OR OTHERWISE TRANSFERRED BY THE -BUYER TO ANY SUBSEQUENT USER OR PURCHASER OR TO ANY OTHER PERSON OR ENTITY. 2/8/2010 WA0057 Notwithstanding anything to the contrary herein, Pierce makes no warranty whatsoever as to: (a) any Integral parts, components, attachments or trade accessories of or to the product that are not manufactured by Pierce, including but not limited to engines, transmissions, drivelines, axles; water pumps and generators; with respect to all such parts, components, attachments and accessories, Pierce shall assigmto Buyer the applicable warranties, If any, made by the respective manufacturers thereof; (b) any vehicle, chassis. or component, part, attachment or accessory damaged by misuse, neglect, fire, exposure to severe environmental or chemical conditions, acidic environment, improper maintenance, accident, dash, or force majeure such as natural disaster, lightning, earthquake, windstorm, hail; flood, war or riot; (c) any vehicle, chassis or component, part attachment or accessory that has been repaired, altered or assembled in any way by any person or entity other than Pierce which, in the sole judgment of Pierce, adversely effects the performance, stability or purpose for which it was manufactured;. or (d) products or parts which may in the ordinary course wear out and have to be replaced during the warranty. period, Inducting, but not limited to, fires. fluids, gaskets and light bulbs. Pierce assumes no responsibility for the assembly of its parts or subassemblies Into finishing products or vehicles unless theassembly is performed by Pierce. The original purchaser may void this warranty in part or In its entirety if the product Is repaired or replaced (a) without prior written approval of the Pierce Customer Service Department; or at facility which has not been approved by Pierce as to technical capability. Any repairs, modifications, alterations or aftermarket parts added after manufacture without the authorization of Pierce may void this warranty. 2, DISCLAIMERS OF WARRANTIES THE WARRANTY SET.FORTHIN PARAGRAPH 1 I THE SOLE AND EXCLUSIVE WARRANTY GIVEN.BY PIERCE. PIERCE HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY, ANY WARRANTY OF FITNESS FOR PARTICULAR PURPOSE, AND ANY WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE. 3. BUYER'S EXCLUSIVE REMEDY. If the product fails to conform to the warranty set forth in paragraph 1 during the warranty period, and such nonconformity is not due to misuse. neglect. accident or improper maintenance. Buyer must notify Pierce within the time period specified in paragraph 1, and shall make the product available for inspection by Pierce or its designated agent. At the request of Pierce,: any allegedly detective, product shall be returned to Pierce by Buyer for examination andfor repair. Buyer shall be responsible for the cost of such transportation, and for risk of loss of or damage to the product during transportation. Within a reasonable lime. Pierce shall repair or replace (al Pierces option and expense) any nonconforming or defective parts. Repair or replacement shall.be made only by a facility approved in advance in writing by Pierce. THIS REMEDY SHALL BE THE EXCLUSIVE AND SOLE REMEDY FOR ANY BREACH OF WARRANTY. 4. EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAG ES. Notwithstanding anything.to the contrary herein or in any agreement between Pierce and Buyer, IN NO EVENT SHALL PIERCE BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, SPECIAL, INDIRECT, OR PUNITIVE DAMAGES WHATSOEVER, .WHETHER ARISING OUT OF BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR OTHER THEORY OF LAW OR EQUITY, WITH RESPECT TO VEHICLES OR OTHER PRODUCTS SOLD BY PIERCE, OR THEIR OPERATION OR FAILURE TO OPERATE, OR ANY DEFECTS THEREIN, OR ANY UNDERTAKINGS, ACTS OR OMISSIONS RELATED THERETO, REGARDLESS OF WHETHER PIERCE HAS BEEN INFORMED OF THE POSSIBILITY OF ANY SUCH DAMAGES. Without limiting the generality of the foregoing, Pierce specifically disclaims any liability for property or personal injury damages, penalties, damages for lost profits or revenues; loss of vehicles or products or any associated equipment, cost of substitute vehicles or products, down -time; delay damages, any other types of economic loss, or for any claims by any third parry for any such damages. Note: Any Surety Bond if a par of the sale of the vehicle as to which this Omited warranty is provided,: applies only to this Pierce Basic One Year Limited Warranty for such vehicle, and not to other warranties made by Pierce in a separate document (if any) or to the warranties (if any) made by any manufacturer (other than Pierce) of any pall, component. attachment or accessory that is incorporated into or attached to the vehicle. Exterior surfaces of the body shall be free from blistering, Coverage: peeling, corrosion or any other adhesion defect caused by defective manufacturing methods or paint material selection. The date of the original purchase Invoice (issued when the Warranty Begins:. product ships from the factory). Warranty Period Ten (10) Years Ends After This limited warrardy, is applicable to the vehicle In the following percentage costs of warranty repair, If any: Topcoat Durability& Appearance: Gloss, Color Retention & Cracking 6.72 months 100% ' 7"S months 601/6 97 -120 months 25% Integrity of Coating System: Adhesion, Blistering/Bubbling 036 months 100% 37 -84 months 60% 85.120 months 25% Conditions and Corrosion: Dissimilar Metal and Crevice Exclusions: 0.36 months 100% Sea Also 3738 months 50% Paragraphs 49.72 months 25% 2 thru 4 73.120 months 10% Corrosion Perforation 0 -120 months 100% This limited warranty applies only to exterior paint. Paint on the vehicle's Interior is warranted only under the Pierce Basic One Year Limited Warranty. Items not covered by this warranty include: (a) Damage from lack of maintenance and cleaning (proper cleaning and maintenance procedures are detailed in the Pierce operation and maintenance manual). (b) UV paint fade. (c). Any cab not manufactured by Pierce. This limited warranty shall apply only if the product is properly maintained In accordance with Pterce's maintenance Instructions and manuals and is used in service which Is normal to the particular model. Normal service means service which does not subject the product to stresses or impacts greater than normally result from careful use. If the Buyer discovers a defect or nonconformity, it must notify Pierce in writing within thirty (30) days after the date of discovery, but in any event prior to the expiration of the warranty period. THIS LIMITED WARRANTY MAY NOT BE ASSIGNED OR OTHERWISE TRANSFERRED BY THE -BUYER TO ANY SUBSEQUENT USER OR PURCHASER OR TO ANY OTHER PERSON OR ENTITY. 2/8/2010 WA0057 Notwithstanding anything to the contrary herein, Pierce makes no warranty whatsoever as to: (a) any Integral parts, components, attachments or trade accessories of or to the product that are not manufactured by Pierce, including but not limited to engines, transmissions, drivelines, axles; water pumps and generators; with respect to all such parts, components, attachments and accessories, Pierce shall assigmto Buyer the applicable warranties, If any, made by the respective manufacturers thereof; (b) any vehicle, chassis. or component, part, attachment or accessory damaged by misuse, neglect, fire, exposure to severe environmental or chemical conditions, acidic environment, improper maintenance, accident, dash, or force majeure such as natural disaster, lightning, earthquake, windstorm, hail; flood, war or riot; (c) any vehicle, chassis or component, part attachment or accessory that has been repaired, altered or assembled in any way by any person or entity other than Pierce which, in the sole judgment of Pierce, adversely effects the performance, stability or purpose for which it was manufactured;. or (d) products or parts which may in the ordinary course wear out and have to be replaced during the warranty. period, Inducting, but not limited to, fires. fluids, gaskets and light bulbs. Pierce assumes no responsibility for the assembly of its parts or subassemblies Into finishing products or vehicles unless theassembly is performed by Pierce. The original purchaser may void this warranty in part or In its entirety if the product Is repaired or replaced (a) without prior written approval of the Pierce Customer Service Department; or at facility which has not been approved by Pierce as to technical capability. Any repairs, modifications, alterations or aftermarket parts added after manufacture without the authorization of Pierce may void this warranty. 2, DISCLAIMERS OF WARRANTIES THE WARRANTY SET.FORTHIN PARAGRAPH 1 I THE SOLE AND EXCLUSIVE WARRANTY GIVEN.BY PIERCE. PIERCE HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY, ANY WARRANTY OF FITNESS FOR PARTICULAR PURPOSE, AND ANY WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE. 3. BUYER'S EXCLUSIVE REMEDY. If the product fails to conform to the warranty set forth in paragraph 1 during the warranty period, and such nonconformity is not due to misuse. neglect. accident or improper maintenance. Buyer must notify Pierce within the time period specified in paragraph 1, and shall make the product available for inspection by Pierce or its designated agent. At the request of Pierce,: any allegedly detective, product shall be returned to Pierce by Buyer for examination andfor repair. Buyer shall be responsible for the cost of such transportation, and for risk of loss of or damage to the product during transportation. Within a reasonable lime. Pierce shall repair or replace (al Pierces option and expense) any nonconforming or defective parts. Repair or replacement shall.be made only by a facility approved in advance in writing by Pierce. THIS REMEDY SHALL BE THE EXCLUSIVE AND SOLE REMEDY FOR ANY BREACH OF WARRANTY. 4. EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAG ES. Notwithstanding anything.to the contrary herein or in any agreement between Pierce and Buyer, IN NO EVENT SHALL PIERCE BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, SPECIAL, INDIRECT, OR PUNITIVE DAMAGES WHATSOEVER, .WHETHER ARISING OUT OF BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR OTHER THEORY OF LAW OR EQUITY, WITH RESPECT TO VEHICLES OR OTHER PRODUCTS SOLD BY PIERCE, OR THEIR OPERATION OR FAILURE TO OPERATE, OR ANY DEFECTS THEREIN, OR ANY UNDERTAKINGS, ACTS OR OMISSIONS RELATED THERETO, REGARDLESS OF WHETHER PIERCE HAS BEEN INFORMED OF THE POSSIBILITY OF ANY SUCH DAMAGES. Without limiting the generality of the foregoing, Pierce specifically disclaims any liability for property or personal injury damages, penalties, damages for lost profits or revenues; loss of vehicles or products or any associated equipment, cost of substitute vehicles or products, down -time; delay damages, any other types of economic loss, or for any claims by any third parry for any such damages. Note: Any Surety Bond if a par of the sale of the vehicle as to which this Omited warranty is provided,: applies only to this Pierce Basic One Year Limited Warranty for such vehicle, and not to other warranties made by Pierce in a separate document (if any) or to the warranties (if any) made by any manufacturer (other than Pierce) of any pall, component. attachment or accessory that is incorporated into or attached to the vehicle. p;< Fire and Rescue Apparatus 4S t ik. Two (2) Year Material and Workmanship Power Step r 7 1, UMITED WARRANTY Subject to the limitations and exclusions set forth below, Pierce Manufacturing provides the following warranty to the Buyer. Coverage: Each power step shall be free from defects In material and workmanship Warranty Begins: The date ofthe original purchase Invoice (Issued when the product ships from the factory). Warranty Period TWo (2) Years Ends After. Conditions and Exclusions: See Also No specific exclusions apply Paragraphs 2 thru 4 This limited warranty shall apply only if the product is properly maintained in accordance with Pierce's maintenance Instructions and manuals and is used in service which is normal to the particular model. Normal service means service which does not subject the product to stresses or impacts greater than normally result from careful use. H. the Buyer discovers a defect or nonconformity, it must notify Pierce in writing within thirty (30) days after the date of dscovery, but in any event prior to the expiration of the warranty period. THIS.LIMITED WARRANTY MAY NOT BE ASSIGNED OR OTHERWISE TRANSFERRED BY THE BUYER TO ANY SUBSEQUENT USER OR PURCHASER OR TO ANY OTHER PERSON OR ENTITY. 218/2010 WA0031 Notwithstanding anything to the contrary herein,. Pierce makes no warranty whatsoever as to: (a) any Integral parts, components, attachments or trade accessories of or to the product that are not manufactured by Pierce, including but not fimited to engines, transmissions, drivelines; axles, water pumps and generators; with respect to all such parts, components, attachments and accessories. Pierce shall assign to Buyer the applicable warranties, if any, made by the respective manufacturers thereof: (b). any vehicle, chassis, or component, part, attachment or accessory damaged by misuse, neglect, fire, exposure to severe environmental or chemical conditions, acidic environment, improper maintenance, accident, crash, or force ma)eure such.as natural disaster, lightning, earthquake, windstorm, hail, flood, war or riot (c) any vehicle, chassis or component, part attachment or accessory that has been repaired, altered or assembled in any way by any person or entity other than Pierce which, in the sole judgment of, Pierce, adversely affects the performance, stability or purpose for which it was manufactured;,or (d) products or parts which may in the ordinary course wear out and have to be replaced during the warranty period, including, but not limited to, .tires, fluids, gaskets and light bulbs. Pierce assumes no responsibility for the assembly of its parts or subassemblies into finishing products or vehicles unless the assembly is performed by Pierce. The original purchaser may void this warranty in part or in its entirety if the product is repaired or replaced (a) without prior written approval of the Pierce Customer Service Department; or (b) at a facility which has not been approved by Pierce as to technical capability. Any repairs, modifications, alterations or aftennarket parts added after manufacture without the authorization of Pierce may void this warranty. 2 DISCLAIMERS OF WARRANTIES THE WARRANTY SET FORTH IN PARAGRAPH I IS THE SOLE AND EXCLUSIVE WARRANTY GIVEN BY PIERCE.PIERCE HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY, ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, AND ANY WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE. 3. BUYER'S EXCLUSIVE REMEDY. If the product fails to conform to the warranty set forth inparagraph 1 during the warranty period, and such nonconformity is not clue to misuse, neglect, accident or improper maintenance. Buyer must notify Pierce within the time period specified In paragraph 1, and shall make the product available for inspection by Pierce or its designated agent At the request of Pierce, any allegedly defective product shall be returned to Pierce by Buyer for examination andlor repair. Buyer shall be responsible for the cost of such transportation, and for risk of loss of or damage to the product during transportation. Within a reasonable time, Pierce shall repair or replace (al Pierce's option and expense) any nonconforming or defective parts. Repair or replacement shall be made only by a facility approved in advance in writing by Pierce. THIS REMEDY SHALL BE THE EXCLUSIVE AND SOLE REMEDY FOR ANY BREACH OF WARRANTY. 4. EXCLUSION OF CONSEQUENTIAL AND iNCIDENTAL.DAMAG ES. Notwithstanding anything to the contrary herein or in any agreement between Pierce and Buyer, IN NO EVENT SHALL PIERCE BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL,: SPECIAL, . INDIRECT, OR PUNITIVE DAMAGES WHATSOEVER, WHETHER ARISING OUT OF BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR OTHER THEORY OF LAW OR EQUITY, WITH, RESPECT TO VEHICLES OR OTHER PRODUCTS SOLD BY PIERCE, OR THEIR OPERATION OR FAILURE TO OPERATE. OR ANY DEFECTS THEREIN, OR ANY UNDERTAKINGS, ACTS OR OMISSIONS RELATED THERETO, REGARDLESS OF WHETHER PIERCE HAS BEEN INFORMED OF THE POSSIBILITY OF ANY SUCH DAMAGES. Without limiting the generality of the foregoing. Pierce specifically disclaims any liability for property or personal Injury damages, penalties, damages for .lost profits or revenues, loss of vehicles or products or any associated equipment, cost of substitute vehicles or products, down -time, delay damages, any other types of economic loss, or for any claims by any third party for any such damages. Note: Any Surety Bond, . if a part of the sale of the vehicle as to which this limited warranty is provided, applies only to this Pierce Basic One Year Limited Warranty for such vehicle, and not to other warranties made by Pierce in a separate document (if any) or to the warranties (it any) made by any manufacturer (other than Pierce) of any pad, component, attachment or accessory that is incorporated into or attached to the vehicle. G, Fire and Rescue Apparatus Five (5) Year Material and Workmanship Command Zone Electronics Limited Warranty 1. LIMITED WARRANTY Subject to the limitations and exclusions set forth below, Pierce Manufacturing provides the following warranty to the Buyer. Coverage: Command Zone control modules shall be free from failures caused by defects In material and workmanship t Warranty Begins: The date of the original purchase invoice (issued when the product ships from the factory). Warranty Period Five (5) Years Ends After. Conditions and This limited warranty applies to all of the control modules for Exclusions: the Command Zone system, Including the full color graphic displays. Related wire harnesses, cables and connectors are See Also not covered under this limited warranty and are Instead Paragraphs covered under the Pierce One Year Basic Apparatus Limited 2 thro 4 Warranty, - This limited warranty shell apply only if the product is property maintained In accordance with Pierce's maintenance instructions and manuals and is used in service which is normal to the particular model. Normal service means service which does not subject the product to stresses or impacts greater than normally result from careful use. If the Buyer discovers adefect or nonconformity, it must notify Pierce in writing within thirty (30) days after the dale of discovery, but in any event prior to the expiration of the warranty period. THIS LIMITED WARRANTY MAY NOT BE ASSIGNED OR OTHERWISE TRANSFERRED BY THE BUYER TO ANY SUBSEQUENT USER OR PURCHASER OR TO ANY OTHER PERSON OR ENTITY. 21812010 WA0014 Notwithstanding anything to the contrary herein, Pierce makes no warranty whatsoever as to: (a) any integral parts, components, attachments or trade accessories of or to the product that are not manufactured by Pierce, including but not limited to engines, transmissions; drivellnes,axles, water pumps and generators: with respect.to all such parts, components, attachments and accessories, Pierce shall assign to Buyer the applicable warranties, 0 any, made by the respective manufacturers thereof; (b) any vehicle, chassis, or component, part, attachment or accessory damaged by misuse, neglect, fire, exposure to severe environmental or chemical conditions. acidic environment, improper maintenance, accident, crash, or force majeure such as natural disaster, lightning, earthquake, windstorm, hall, flood, war or riot (c) any vehicle; chassis or component, part attachment or accessory that has been repaired, altered or assembled in any way by any person or entity other then Pierce which, in the sole judgment of Pierce, adversely affects the performance, stability or purpose for which it was manufactured; or (d) products or parts which may in the ordinary course wear out and have to be replaced during the warranty period, including. but not limited to. Ores. fluids, gaskets and light bulbs. Pierce assumes no responsibility for the assembly of its parts or subassemblies into finishing products or vehicles unless the assembly is performed by Pierce. The original purchaser may void this warranty in part or in its entirety if the product is repaired or replaced (a) without prior written approval of the Pierce Customer Service Department; or (b) at a facility which has not been approved by Pierce as to technical capability. Any repairs, modifications, alterations or aftermarket parts added after manufacture without the authorization of Pierce may void this warranty. z. DISCLAIMERS OF WARRANTIES THE WARRANTY SET FORTH IN PARAGRAPH .1 IS THE SOLE AND :EXCLUSIVE WARRANTY GIVEN BY PIERCE. PIERCE HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES, WHETHER EXPRESS. IMPLIED OR STATUTORY. INCLUDING: WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY, ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, AND ANY WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE. 3, BUYER'S EXCLUSIVE REMEDY. If the product tails .to conform to the warranty setforth in paragraph 1 during the warranty period, and such nonconformity is not due tomisuse, neglect, accident or improper maintenance, Buyer must notify Pierce within the time period specified in paragraph 1, and shall make the product available for inspection by Pierce or its designated agent. Al. the request of Pierce, any allegedly defective, product shall be returned to Pierce by Buyer for examination andfor repair. Buyer shall be responsible for the cost of such transportation, and for risk of loss of or damage to the product during transportation. Within a reasonable time, Pierce shall repair or replace (at Pierce's option and expense). any nonconforming or defective parts. Repair or replacement shall be made only by a facility approved in advance in writing by Pierce. THIS REMEDY SHALL BE THE EXCLUSIVE AND SOLE REMEDY FOR ANY BREACH OF WARRANTY. 4. EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAG ES. Notwithstanding anything to the contrary herein or in any agreement between Pierce and Buyer, IN NO EVENT SHALL PIERCE BE LIABLE, FOR ANY CONSEQUENTIAL, INCIDENTAL, SPECIAL, INDIRECT, OR PUNITIVE DAMAGES WHATSOEVER, WHETHER ARISING OUT OF BREACH OF CONTRACT,, WARRANTY, TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR OTHER THEORY OF LAW OREQUITY, WITH RESPECT TO VEHICLES OR OTHER PRODUCTS SOLD BY PIERCE, OR THEIR OPERATION OR . FAILURE TO OPERATE, .OR ANY DEFECTS THEREIN, OR ANY UNDERTAKINGS, ACTS OR OMISSIONS RELATED THERETO, REGARDLESS OF WHETHER PIERCE HAS BEEN INFORMED OF THE POSSIBILITY OF ANY SUCH DAMAGES. Without limiting the generality of the foregoing; Pierce specifically disclaims any liability for property or personal injury damages,. penalties, damages for lost profits or revenues, loss of vehicles or products or any associated equipment, cost of substitute vehicles or products, down-time. delay damages, any other types of economic loss, or for any claims '. by any third party for.any such damages. Note: Any Surety Bond.. if a part of the sale ot.the vehicle as to which this limited warranty is provided, applies only to this Pierce Basic One Year Limited Warranty for such vehicle: and not to other warranties made by Pierre in a separate document (if any) or to the warranties (if any) made by any manufacturer (other than Pierce) of any part, . component. attachment or accessory that is incorporated into or attached to the vehicle. Fire and Rescue Apparatus 54 Months Material and Workmanship Camera System Limited Warranty Subject to the limitations and exclusions set forth below, Pierce Manufacturing provides the following warranty to the Buyer. This limited warranty shall apply only if the product Is property maintained in accordance with Pierce's maintenance instructions and manuals and is used in service which is normal to the particular modal. Normal service means service which does not subject the product to stresses or impacts greater than normally result from careful use. If the Buyer discovers a defect or nonconformity, it must notify Pierce in writing within thirty (30) days after the date of discovery, but In any event prior to the expiration of the warranty period. THIS LIMITED WARRANTY MAY NOT BE ASSIGNED OR OTHERWISE TRANSFERRED BY THE BUYER TO ANY SUBSEQUENT USER OR PURCHASER OR TO ANY OTHER PERSON OR ENTITY. 1/11/2011 WA0188 Notwithstanding anything to the contrary herein, Pierce makes no warranty whatsoever as to: (a) any integral parts, components, attachments or trade accessories of or to the product that are not manufactured by Pierce, including but not limited to engines, transmissions, drivefines, axles, water pumps and generators; with respect to all such parts, components,.atlachrhents and accessories, Pierce shall assign to Buyer the applicable warranties, if any, made by the respective manufacturers thereof; (b) any vehicle, chassis, or component, part, attachment or accessory damaged by misuse, neglect, fire, exposure to severe environmental or chemical conditions, acidic environment, improper maintenance, accident, crash, or force majeure such as natural disaster, lightning, earthquake, windstorm, hail, good, war or dot; (c) any vehide,.chassis or component, part, attachment or accessory that has been repaired, altered or assembled in any way by any person or entity other than Pierce which. in the sole judgment of Pierce, adversely affects the performance, stability or purpose for which it was manufactured; or (d) products or parts which may in the ordinary course wear out and have to be replaced during the warranty period, including, but not limited to. tires, fluids, gaskets and light bulbs. Pierce assumes no responsibility for the assembly of its parts or subassemblies Into finishing products or vehicles unless the assembly: is performed by Pierce. The original purchaser may void this warranty. In part or in its entirely if the,product is repaired or replaced (a) without phor written approval of the Pierce Customer Service Department; or (b) at a facility which has not been approved by Pierce as to tedirgcal capability. Any repairs, modifications, alterations or aftermarket.pans added after manufacture without the authorization or Pierce may void this warranty. THE WARRANTY SET FORTH IN PARAGRAPH 1 IS THE SOLE AND EXCLUSIVE WARRANTY GIVEN BY PIERCE.. PIERCE HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES. WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY, ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, AND ANY WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE. 3, BUYER'S EXCLUSK REMEDY. If the product fails to conform to the warranty set form in paragraph i during the warranty period, and such nonconformity is not due to misuse, neglect accident or improper maintenance, Buyer must notify Pierce within the time period specified in paragraph 1, and shall make the product available for inspection by Pierce or its designated agent At the request of Fierce, any allegedly defective product shall be retumed.toPierce.by Buyer for examination and/or repair. Buyer shall be responsible for the cost of such transportation, and for risk of loss of or damage to the product during transportation. Within a reasonable time. Pierce shall repair or replace (at Pierce's option and expense) any nonconforming or defective parts. Repair or replacement shall be made only by facility approved in advance In writing by Pierce. THIS REMEDY SHALL BE THE EXCLUSIVE AND SOLE REMEDY FOR ANY BREACH OF WARRANTY. 4. EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAGES. Notwithstanding anything to the contrary herein or in any agreement between Pierce and .Buyer, IN NO EVENT SHALL PIERCE BE LIABLE FOR ANY CONSEQUENTIAL, . INCIDENTAL, SPECIAL. INDIRECT, OR PUNITIVE 'DAMAGES WHATSOEVER, WHETHER ARISING OUT OF BREACH OF CONTRACT. WARRANTY, TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR OTHER THEORY OF LAW OR EQUITY, WITH RESPECT TO VEHICLES OR OTHER PRODUCTS SOLD BY PIERCE, OR THEIR OPERATION OR FAILURE TO OPERATE, OR ANY DEFECTS THEREIN. OR ANY UNDERTAKINGS, ACTS OR OMISSIONS RELATED THERETO. REGARDLESS OF WHETHER PIERCE. HAS BEEN INFORMED OF THE - POSSIBILITY OF ANY SUCH DAMAGES. Wthout limiting the generality of the foregoing, Pierce specifically disclaims any liability for property or personal Injury damages, . penalties. damages for lost profits or revenues, loss of vehicles or products or any associated equipment cost of substitute vehicles or products, down -time, delay damages, any other types of economicioss, or for any claims by any third party for any such damages. Note: Any Surety Bond, H a part of the sale of the vehicle as to which this limited warranty is provided„ applies only to this Pierce Basic One Year Limited Warranty for such vehicle, and not to other, warranties made by Pierce In a separate document (if any) or to the warranties (if any) made by any manutacturer (other than Pierce) of any pert, component, attachment or accessory that is Incorporated into dr attached to the vehicle. This limited warranty coven repairs to correct any defect related to materials or workmanship of the Sharpvlsion Coverage: camera system instated on the apparatus occuring during the warranty period. Warranty Begins: The date of delivery. Warranty Period Fifty- Four(t34) months Ends After: Conditions and Exclusions: This limited warranty does not apply to related wire harnesses, cables, and connectors, which are covered by the See Also Pierce one (1) year basic apparatus limited warranty. Paragraphs 2 thru 4 This limited warranty shall apply only if the product Is property maintained in accordance with Pierce's maintenance instructions and manuals and is used in service which is normal to the particular modal. Normal service means service which does not subject the product to stresses or impacts greater than normally result from careful use. If the Buyer discovers a defect or nonconformity, it must notify Pierce in writing within thirty (30) days after the date of discovery, but In any event prior to the expiration of the warranty period. THIS LIMITED WARRANTY MAY NOT BE ASSIGNED OR OTHERWISE TRANSFERRED BY THE BUYER TO ANY SUBSEQUENT USER OR PURCHASER OR TO ANY OTHER PERSON OR ENTITY. 1/11/2011 WA0188 Notwithstanding anything to the contrary herein, Pierce makes no warranty whatsoever as to: (a) any integral parts, components, attachments or trade accessories of or to the product that are not manufactured by Pierce, including but not limited to engines, transmissions, drivefines, axles, water pumps and generators; with respect to all such parts, components,.atlachrhents and accessories, Pierce shall assign to Buyer the applicable warranties, if any, made by the respective manufacturers thereof; (b) any vehicle, chassis, or component, part, attachment or accessory damaged by misuse, neglect, fire, exposure to severe environmental or chemical conditions, acidic environment, improper maintenance, accident, crash, or force majeure such as natural disaster, lightning, earthquake, windstorm, hail, good, war or dot; (c) any vehide,.chassis or component, part, attachment or accessory that has been repaired, altered or assembled in any way by any person or entity other than Pierce which. in the sole judgment of Pierce, adversely affects the performance, stability or purpose for which it was manufactured; or (d) products or parts which may in the ordinary course wear out and have to be replaced during the warranty period, including, but not limited to. tires, fluids, gaskets and light bulbs. Pierce assumes no responsibility for the assembly of its parts or subassemblies Into finishing products or vehicles unless the assembly: is performed by Pierce. The original purchaser may void this warranty. In part or in its entirely if the,product is repaired or replaced (a) without phor written approval of the Pierce Customer Service Department; or (b) at a facility which has not been approved by Pierce as to tedirgcal capability. Any repairs, modifications, alterations or aftermarket.pans added after manufacture without the authorization or Pierce may void this warranty. THE WARRANTY SET FORTH IN PARAGRAPH 1 IS THE SOLE AND EXCLUSIVE WARRANTY GIVEN BY PIERCE.. PIERCE HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES. WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY, ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, AND ANY WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE. 3, BUYER'S EXCLUSK REMEDY. If the product fails to conform to the warranty set form in paragraph i during the warranty period, and such nonconformity is not due to misuse, neglect accident or improper maintenance, Buyer must notify Pierce within the time period specified in paragraph 1, and shall make the product available for inspection by Pierce or its designated agent At the request of Fierce, any allegedly defective product shall be retumed.toPierce.by Buyer for examination and/or repair. Buyer shall be responsible for the cost of such transportation, and for risk of loss of or damage to the product during transportation. Within a reasonable time. Pierce shall repair or replace (at Pierce's option and expense) any nonconforming or defective parts. Repair or replacement shall be made only by facility approved in advance In writing by Pierce. THIS REMEDY SHALL BE THE EXCLUSIVE AND SOLE REMEDY FOR ANY BREACH OF WARRANTY. 4. EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAGES. Notwithstanding anything to the contrary herein or in any agreement between Pierce and .Buyer, IN NO EVENT SHALL PIERCE BE LIABLE FOR ANY CONSEQUENTIAL, . INCIDENTAL, SPECIAL. INDIRECT, OR PUNITIVE 'DAMAGES WHATSOEVER, WHETHER ARISING OUT OF BREACH OF CONTRACT. WARRANTY, TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR OTHER THEORY OF LAW OR EQUITY, WITH RESPECT TO VEHICLES OR OTHER PRODUCTS SOLD BY PIERCE, OR THEIR OPERATION OR FAILURE TO OPERATE, OR ANY DEFECTS THEREIN. OR ANY UNDERTAKINGS, ACTS OR OMISSIONS RELATED THERETO. REGARDLESS OF WHETHER PIERCE. HAS BEEN INFORMED OF THE - POSSIBILITY OF ANY SUCH DAMAGES. Wthout limiting the generality of the foregoing, Pierce specifically disclaims any liability for property or personal Injury damages, . penalties. damages for lost profits or revenues, loss of vehicles or products or any associated equipment cost of substitute vehicles or products, down -time, delay damages, any other types of economicioss, or for any claims by any third party for any such damages. Note: Any Surety Bond, H a part of the sale of the vehicle as to which this limited warranty is provided„ applies only to this Pierce Basic One Year Limited Warranty for such vehicle, and not to other, warranties made by Pierce In a separate document (if any) or to the warranties (if any) made by any manutacturer (other than Pierce) of any pert, component, attachment or accessory that is Incorporated into dr attached to the vehicle. Fire and Rescue Apparatus R N Ten (10) Year Material and Workmanship Pierce 12V LED strip Light � T 1. LIMITED WARRANTY Subject to the limitations and exclusions set forth below, Pierce Manufacturing provides the following warranty to the Buyer. This limited warranty shall apply only if the product is properly maintained in accordance with Pierce's maintenance instructions and manuals and.is. used -in service which is normal to the particular model. Normal service means service which does not subject the product to stresses or impacts greater than normally result from careful use. If the Buyer discovers a defect or nonconformity, it must notify Pierce in writing within thirty (30) days after the date of discovery, but in any event prior to the expiration of the warranty period THIS LIMITED WARRANTY MAY NOT BE ASSIGNED OR OTHERWISE TRANSFERRED BY THE BUYER TO ANY SUBSEQUENT USER OR PURCHASER OR TO ANY OTHER PERSON OR ENTITY. 7/5/2011 WA0203 Notwithstanding anything to the contrary herein. Pierce makes no warranty whatsoever as to: (a) any integral parts, components, attachments or trade accessories of or to the product that are not manufactured by Pierce, including but not limited to engines, transmissions; drivelines, axles, water pumps and generators; with respect to all such parts, components, attachments and accessories. Pierce shall assign to Buyer the applicable warranties, if any; made by the respective manufacturers thereof; (b) any vehicle, chassis, or component part, attachment or accessory damaged by misuse, neglect, fire, exposure to severe environmental or chemical conditions, acidic anvironment improper maintenance, accident, crash, on force majeure such as natural disaster, lightning, earthquake, windstorm, hail, flood, war or riot; (c) any vehicle, chassis or component part, attachment or accessory that has been repaired, altered or assembled in any way by any person or entity other. than Pierce which, in the sole judgment of Pierce, adversely affects the performance, stability or purpose for which it was manufactured or (d) products or parts which may in the ordinary course wear out and haveto be replaced during the warranty period..includng, but not limited to, tires, fluids, gaskets and light bulbs. Pierce assumes no responsibility for the assembly of its parts or subassemblies into finishing products or vehicles unless the assembly is performed by Pierce. The original purchaser may void this warranty in part or snits entirety lithe product is repaired or replaced (a) without prior written approval of the Pierce Customer Service Department, or (b) at a facility which has not been approved by Pierce as to technical. capability. Any repairs, modifications, alterations or aftermarket parts added after manufacture without the authorization of Pierce may void this warranty. 2. DISCLAIMERS OF WARRANTIES THE WARRANTY SET FORTH IN PARAGRAPH 1 IS THE SOLE AND EXCLUSIVE WARRANTY GIVEN BY PIERCE. PIERCE HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES, WHETHER EXPRESS; IMPLIED OR STATUTORY, . INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY, ANY WARRANTY OF FITNESS FOR APARTICULAR PURPOSE, AND ANY WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE. 3. BUYER'S EXCLUSIVE REMEDY. If the product fails to Conform to the warranty set forth in paragraph 1 during the warranty period, and such nonconformity is not due to misuse, neglect, accident or Improper maintenance, Buyer must notify Pierce within the time period specified in paragraph 1,. and shall make the product available for inspection by Pierce or its designated agent. At the request of Pierce, any allegedly detective product shall be returned to Pierce by Buyer for examination and/or repair. Buyer shall be responsible for the cost of such transportation, and for risk of loss of or damage to the product during transportation. Within a reasonable time, Pierce shall repair or replace (at Pierce's option and expense) any nonconforming or defective parts. Repair or replacement shall be made only by a facility approved in advance in writing by Pierce. THIS REMEDY SHALL BE THE EXCLUSIVE AND SOLE REMEDY FOR ANY BREACH OF WARRANTY, N OF CONSEQUENTIAL AND INCIDENTAL DAMAGES. Notwithstanding arrMing:to the contrary herein or in any agreement. between Pierce and .Buyer, INNO' EVEN T SHALL PIERCE BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, SPECIAL, INDIRECT, OR PUNITIVE DAMAGES WHATSOEVER, WHETHER ARISING OUT OF BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR THEORY OF LAW'- _ - ... _..__._ ... .. OR EQUITY, WITH RESPECT to VEHICLES OR OTHER�.PRO DUCTS .SOLD BY PIERCE, OR THEIR: OPERATION OR FAILURE TO OPERATE, OR ANY DEFECTS THEREIN, OR ANY UNDERTAKINGS, ACTS OR OMISSIONS RELATED THERETO, REGARDLESS OF WHETHER PIERCE HAS BEEN INFORMED OF THE POSSIBILITY OF ANY SUCH DAMAGES. Without limiting the generality of the foregoing. Pierce specifically disclaims any liability for property or personal injury damages, penalties, damages for lost profits or revenues; loss of vehicles or, products or any associated equipment, cost of substitute vehicles or products, down -time, delay damages, any other types of economic loss, or for any claims by any third parry for any such damages. Note: Any Surely Bond, if a part of the sale of Me vehicle as to which this limited warranty is provided applies only to this Pierce. Basic One Year Limited Warranty for such vehicle, and not to other warranties made by Pierce in a separate document (if any) or to the warranties (if any) made by any manufacturer (other than Pierce) of any part, component, attachment or accessory that is incorporated into or attached to the vehicle. This limited warranty covers repairs to correct any defect related to materials or workmanship of the Pierce 12V LED Coverage: strip lights installed on the apparatus occuring during the warranty period. Warranty Begins: The date of the original purchase invoice (issued when the product ships from the factory). Warranty Period Ten (10) Year Ends After: Conditions and Exclusions: This limited warranty does not apply to related wire See Also S Also harnesses, cables, and connectors, which are covered by the oee s Pierce one (1) year basic apparatus limited warranty. 2 thru 4 This limited warranty shall apply only if the product is properly maintained in accordance with Pierce's maintenance instructions and manuals and.is. used -in service which is normal to the particular model. Normal service means service which does not subject the product to stresses or impacts greater than normally result from careful use. If the Buyer discovers a defect or nonconformity, it must notify Pierce in writing within thirty (30) days after the date of discovery, but in any event prior to the expiration of the warranty period THIS LIMITED WARRANTY MAY NOT BE ASSIGNED OR OTHERWISE TRANSFERRED BY THE BUYER TO ANY SUBSEQUENT USER OR PURCHASER OR TO ANY OTHER PERSON OR ENTITY. 7/5/2011 WA0203 Notwithstanding anything to the contrary herein. Pierce makes no warranty whatsoever as to: (a) any integral parts, components, attachments or trade accessories of or to the product that are not manufactured by Pierce, including but not limited to engines, transmissions; drivelines, axles, water pumps and generators; with respect to all such parts, components, attachments and accessories. Pierce shall assign to Buyer the applicable warranties, if any; made by the respective manufacturers thereof; (b) any vehicle, chassis, or component part, attachment or accessory damaged by misuse, neglect, fire, exposure to severe environmental or chemical conditions, acidic anvironment improper maintenance, accident, crash, on force majeure such as natural disaster, lightning, earthquake, windstorm, hail, flood, war or riot; (c) any vehicle, chassis or component part, attachment or accessory that has been repaired, altered or assembled in any way by any person or entity other. than Pierce which, in the sole judgment of Pierce, adversely affects the performance, stability or purpose for which it was manufactured or (d) products or parts which may in the ordinary course wear out and haveto be replaced during the warranty period..includng, but not limited to, tires, fluids, gaskets and light bulbs. Pierce assumes no responsibility for the assembly of its parts or subassemblies into finishing products or vehicles unless the assembly is performed by Pierce. The original purchaser may void this warranty in part or snits entirety lithe product is repaired or replaced (a) without prior written approval of the Pierce Customer Service Department, or (b) at a facility which has not been approved by Pierce as to technical. capability. Any repairs, modifications, alterations or aftermarket parts added after manufacture without the authorization of Pierce may void this warranty. 2. DISCLAIMERS OF WARRANTIES THE WARRANTY SET FORTH IN PARAGRAPH 1 IS THE SOLE AND EXCLUSIVE WARRANTY GIVEN BY PIERCE. PIERCE HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES, WHETHER EXPRESS; IMPLIED OR STATUTORY, . INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY, ANY WARRANTY OF FITNESS FOR APARTICULAR PURPOSE, AND ANY WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE. 3. BUYER'S EXCLUSIVE REMEDY. If the product fails to Conform to the warranty set forth in paragraph 1 during the warranty period, and such nonconformity is not due to misuse, neglect, accident or Improper maintenance, Buyer must notify Pierce within the time period specified in paragraph 1,. and shall make the product available for inspection by Pierce or its designated agent. At the request of Pierce, any allegedly detective product shall be returned to Pierce by Buyer for examination and/or repair. Buyer shall be responsible for the cost of such transportation, and for risk of loss of or damage to the product during transportation. Within a reasonable time, Pierce shall repair or replace (at Pierce's option and expense) any nonconforming or defective parts. Repair or replacement shall be made only by a facility approved in advance in writing by Pierce. THIS REMEDY SHALL BE THE EXCLUSIVE AND SOLE REMEDY FOR ANY BREACH OF WARRANTY, N OF CONSEQUENTIAL AND INCIDENTAL DAMAGES. Notwithstanding arrMing:to the contrary herein or in any agreement. between Pierce and .Buyer, INNO' EVEN T SHALL PIERCE BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, SPECIAL, INDIRECT, OR PUNITIVE DAMAGES WHATSOEVER, WHETHER ARISING OUT OF BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR THEORY OF LAW'- _ - ... _..__._ ... .. OR EQUITY, WITH RESPECT to VEHICLES OR OTHER�.PRO DUCTS .SOLD BY PIERCE, OR THEIR: OPERATION OR FAILURE TO OPERATE, OR ANY DEFECTS THEREIN, OR ANY UNDERTAKINGS, ACTS OR OMISSIONS RELATED THERETO, REGARDLESS OF WHETHER PIERCE HAS BEEN INFORMED OF THE POSSIBILITY OF ANY SUCH DAMAGES. Without limiting the generality of the foregoing. Pierce specifically disclaims any liability for property or personal injury damages, penalties, damages for lost profits or revenues; loss of vehicles or, products or any associated equipment, cost of substitute vehicles or products, down -time, delay damages, any other types of economic loss, or for any claims by any third parry for any such damages. Note: Any Surely Bond, if a part of the sale of Me vehicle as to which this limited warranty is provided applies only to this Pierce. Basic One Year Limited Warranty for such vehicle, and not to other warranties made by Pierce in a separate document (if any) or to the warranties (if any) made by any manufacturer (other than Pierce) of any part, component, attachment or accessory that is incorporated into or attached to the vehicle. NEW PRODUCT WARRANTY ayuhson PARTICIPATING OEM SALES DISTRIBUTOR SALES rnissIM. LIMITED WARRANTY ON NEW ALLISON AUTOMATIC TRANSMISSIONS USED IN EMERGENCY VEHICLE APPLICATIONS Allison Transmission will provide for repairs or replacement, at its option, during the warranty period of each new Allison transmission listed below that is installed in an Emergency Vehicle in accordance with the following terms, conditions, and limitations. WHAT IS COVERED • WARRANTY APPLIES —This warranty is for new Allison transmission models listed below installed in an Emergency Vehicle and is provided to the original and any subsequent owner(s) of the vehicle during the warranty period. • REPAIRS COVERED —The warranty covers repairs or replacement, at Allison Transmission's option, to correct any transmission malfunction resulting from defects in material or workmanship occurring during the warranty period. Needed repairs or replacements will be performed using the method Allison Transmission determines most appropriate under the circumstances. • TOWING — Towing is covered to the nearest Allison Transmission Distributor or authorized Dealer only when necessary to prevent further damage to your transmission. ° PAYMENT TERMS — Warranty repairs; including parts and labor, will be covered per the schedule shown in the chart contained in section "APPLICABLE MODELS, WARRANTY LIMITATIONS, AND ADJUSTMENT SCHEDULE." • OBTAINING REPAIRS —To obtain warranty repairs, take the vehicle to any Allison Transmission Distributor or authorized Dealer within a reasonable amount of time and request the needed repairs. A reasonable amount of time must be allowed for the Distributor or Dealer to perform necessary repairs. • TRANSMISSION REMOVAL AND REINSTALLATION — Labor costs for the removal and re- installation of the transmission, when necessary to make a warranty repair, are covered by this warranty. • WARRANTY PERIOD —The warranty period for all coverages shall begin on the date the transmission is delivered to the first retail purchaser, with the following. exception: Demonstration Service - A transmission in a new truck or bus may be demonstrated to a total of 5000 miles (8000 kilometers). If the vehicle is within this limit when sold to a retail purchaser, the warranty start date is the date of purchase. Normal warranty services are applicable to the demonstrating Dealer. Should the truck or bus be sold to a retail purchaser after these'limits are reached, the warranty period will begin on the date the vehicle was first placed in demonstration service and the purchaser will be entitled to the remaining warranty. APPLICABLE MODELS, WARRANTY LIMITATIONS, AND ADJUSTMENT SCHEDULE Page 1 oft �Vx Y Traitsintsston 1 06 Months Or I{ilometers Parts Labor'. �`'v�� °�� 0-24 No Limit No Charge No Charge g �NFit� 0-24 No Limit No Charge No Charge 9 r e Q 0-36 No Limit No Charge No Charge 0-60 No Limit No Charge No Charge ! N �+rF( 0-60 No Limit No Charge No Charge Page 1 oft WHAT IS NOT COVERED • DAMAGE DUE TO ACCIDENT, MISUSE, or ALTERATION — Defects and damage caused as the result of any of the following are not covered: — Flood, collision, fire, theft, freezing, vandalism, riot, explosion, or objects striking the vehicle; — Misuse of the vehicle; — Installation into unapproved applications and installations; — Alterations or modification of the transmission or the vehicle, and — Damage resulting from improper storage (refer to long -term storage procedure outlined in the applicable Allison Service Manual) — Anything other than defects in Allison Transmission material or workmanship NOTE: This warranty is void on transmissions used in vehicles currently or previously titled as salvaged, scrapped, junked, or totaled. • CHASSIS, BODY, and COMPONENTS —The chassis and body company (assemblers) and other component and equipment manufacturers are solely responsible for warranties on the chassis, body, component(s), and equipment they provide. Any transmission repair caused by an alterations) made to the Allison transmission or the vehicle which allows the transmission to be installed or operated outside of the limits defined in the appropriate Allison Installation Guideline is solely the responsibility of the entity making the alteration(s). ° DAMAGE CAUSED by LACK of MAINTENANCE or by the USE of TRANSMISSION FLUIDS NOT RECOMMENDED in the OPERATOR'S MANUAL — Defects and damage caused by any of the following are not covered: — Failure to follow the recommendations of the maintenance schedule intervals applicable to the transmission; — Failure to use transmission fluids or maintain transmission fluid levels recommended in the Operator's Manual. MAINTENANCE — Normal maintenance (such as replacement of filters, screens, and transmission fluid) is not covered and is the owner's responsibility. ° REPAIRS by UNAUTHORIZED DEALERS — Defects and damage caused by a service outlet that is not an authorized Allison Transmission Distributor or Dealer are not covered. • USE of OTHER THAN GENUINE ALLISON TRANSMISSION PARTS — Defects and damage caused by the use of parts that are not genuine Allison Transmission parts are not covered. • EXTRA EXPENSES — Economic loss and extra expenses are not covered. Examples include but are not limited to; loss of vehicle use; inconvenience; storage; payment for loss of time or pay; vehicle rental expense; lodging; meals; or other travel costs. • "DENIED PARTY" OWNERSHIP — Warranty repair parts and labor costs are not reimbursed to any participating or non - participating OEMs, dealers or distributors who perform warranty work for, or on behalf of, end users identified by the United States as being a "`denied party'' or who are citizens of sanctioned or embargoed countries as defined by the U.S. Department of Treasury Office of Foreign Assets Control. Furthermore, warranty reimbursements are not guaranteed if the reimbursement would be contrary to any United States export control laws or regulations as defined by the U.S. Department of Commerce, the U.S. Department of State, or the U.S. Department of Treasury. OTHER TERMS APPLICABLE TO CONSUMERS AS DEFINED by the MAGNUSON -MOSS WARRANTY ACT This warranty gives you specific legal rights and you may also have other rights which vary from state to state. Allison Transmission does not authorize any person to create for it any other obligation or liability in connection with these transmissions. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE APPLICABLE TO THESE TRANSMISSIONS IS LIMITED IN DURATION TO THE DURATION OF THIS WRITTEN WARRANTY. PERFORMANCE OF REPAIRS AND NEEDED ADJUSTMENTS IS THE EXCLUSIVE REMEDY UNDER THIS WRITTEN WARRANTY OR ANY IMPLIED WARRANTY. ALLISON TRANSMISSION SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES (SUCH AS, BUT NOT LIMITED TO, LOST WAGES OR VEHICLE RENTAL EXPENSES) RESULTING FROM BREACH OF THIS WRITTEN WARRANTY OR ANY IMPLIED WARRANTY." ** Some states do not allow limitations on "how long an implied warranty will last or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. OTHER TERMS APPLICABLE TO OTHER END -USERS THIS WARRANTY IS THE ONLY WARRANTY APPLICABLE TO THE ALLISON TRANSMISSION MODELS LISTED ABOVE AND IS EXPRESSLY IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING_ ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. ALLISON TRANSMISSION DOES NOT AUTHORIZE ANY PERSON TO CREATE FOR IT ANY OTHER OBLIGATION OR LIABILITY IN CONNECTION WITH SUCH TRANSMISSIONS. ALLISON TRANSMISSION SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM BREACH OF THIS WARRANTY OR ANY IMPLIED WARRANTY. QUESTIONS If you have any questions regarding this warranty or the performance of warranty obligations, you may contact any Allison Transmission Distributor or Dealer or write to: Allison Transmission, Inc. P.O. Box 894 Indianapolis, IN 46206 -0894 Attention: Warranty Administration PF -9 Form SE0616EN (201009) Page 2 of 2 r Fire and Rescue Apparatus Five (5) Year Material and Workmanship - Transmission Oil Cooler Three (3) Year Collateral Damage Coverage Limited Warranty 1. LIMBED WARRANTY Subject to the limitations and exclusions set forth below, Pierce Manufacturing provides the following warranty to the Buyer.. This limited warranty shall apply only if the product is properly maintained in accordance with Pierce's maintenance instructions and manuals and Is used in service which is normal to the particular model; Normal service means service which does not subject the product to stresses or impacts greater than normally Milk from careful use. If the Buyer discovers a dated or nonconformity, it must notify Pierce in writing within thirty (30) days after the date of discovery, but in any event prior to the expiration of the warranty period. THIS LIMITED WARRANTY MAY NOT BE ASSIGNED OR OTHERWISE TRANSFERRED BY THE BUYER TO ANY SUBSEQUENT USER OR PURCHASER OR TO ANY OTHER PERSON OR ENTITY. 2/22/2012 WA0216 Notwithstanding anything to the contrary herein. Pierce makes no warranty whatsoever as to: (a) any Integral parts. components, attachments or trade accessories of or to the product that are not manufactured by Pierce, including but not limited to engines, transmissions, . driveGnes, axles, water pumps and generators: with respect to all such parts, components, attachments and accessories, Pierce shah assign to Buyer the applicable warranties, if any, made by the respective manufacturers thereof, (b) any vehicle, chassis, or component. pan, attachment or accessory damaged by misuse, neglect, fire, exposure to severe environmental .or chemical conditions, acidic environment, improper maintenance, accident crash, or force majeure: such as natural disaster, lightning, earthquake, windstorm, hail, flood, war or riot; (c) any vefricle, chassis or component, pan, attachment or accessory that has been repaired. altered or assembled in any way by any person or entity other than Pierce wIM,.In the sole judgment of Pierce, adversely affects the performance, stability or purpose for which it was manufactured; or (d) products or parts which may in the ordinary course wear out and -have to be replaced . during the warranty period, Including, but not limited lo, tires. fluids, gaskets and fight bulbs. Pierce assumes no responsibility, for the assembly of its parts or subassemblies into finishing products or vehicles unless the assembly is performed by Pierce. The original purchaser may void this warranty in part or in Its entirety Ache product is repaired or replaced (a) without prior written'approval of the Pierce Customer Service Department or (b) at a facility which has not been approved by Pierce as to technical capability. Any repairs, modifications, alterations or aftermarket pans added after manufacture without the authorization of Pierce may void this warranty. Y, DSCI.AIMERS OF WARRANTIES THE WARRANTY SET FORTH IN PARAGRAPH 1 IS THE SOLE AND EXCLUSIVE WARRANTY GIVEN BY PIERCE. PIERCE HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES, WHETHER EXPRESS, IMPUED OR STATUTORY, . INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY, ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, AND ANY WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE. 3, BUYER'S MUSNE REMEDY. If the product fails to conform to the warranty set forth in paragraph 1 during the warranty . period, and such nonconformity Is not due to misuse, neglect, accident or improper maintenance, Buyer must notify Pierce within the time period specified in paragraph 1, and shall make: the product available for inspection by Pierce or its designated agent. At the request of Pierce, any allegedly defective product shall returned ioPierce by Buyer for examination and/or repair. Buyer shall be responsible for the cost of such transportation, and for risk of loss of or damage to the product during transportation. Within a reasonable time. Pierce shall repair or replace (m Pierces option and expense) any nonconforming or defective pans. Repair or replacement shall be made only by a facility approved in advance in writing by Pierce. THIS REMEDY SHALL BE THE EXCLUSIVE AND SOLE REMEDY FOR ANY BREACH OF WARRANTY.- 4 EXCLUSION OFOONSEQUMMLANDIWICIENTALDAMAGES. Notwithstanding anything to the contrary herein or in any agreement between Pierce . and Buyer, IN NO EVENT SHALL PIERCE BE LIABLE. FOR ANY CONSEQUENTIAL.. INCIDENTAL, SPECIAL, INDIRECT, OR PUNITIVE DAMAGES WHATSOEVER, WHETHER ARISING OUT OF BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR OTHER THEORY OF LAW OR EQUITY, WITH RESPECT TO VEHICLES OR OTHER PRODUCTS SOLD BY PIERCE, OR THEIR OPERATION OR FAILURE TO OPERATE, OR ANY DEFECTS THEREIN, OR ANY UNDERTAKINGS, ACTS OR OMISSIONS, RELATED THERETO, REGARDLESS OF WHETHER PIERCE HAS BEEN INFORMED OF THE .POSSIBILITY OF ANY SUCH DAMAGES. Without limiting the generality of the foregoing, Pierce specifically disclaims any liability for property or personal injury damages, penalties, damages for lost profits or revenues. loss of vehicles or products or any associated equipment, cost of substitute vehicles or products, down -time; delay damages. any other types of economic loss, or for any claims by any third party for any such damages. Note: Any Surety Bond, if part of the sale of the vehicle as to which this limited warranty is provided, applies only to this Pierce Basic One Year Limited Warranty for such vehicle, and not to other warranties made by Pierce In a separate document (A any)'. or to &a warranties (it any) made by any manufacturer (other than Pierce) of any part, component, attachment or accessory that is incorporated into or attached to the vehicle. The transmission cooler shall be free from componed or structural failures caused by defects in material andlor Coverage: workmanship. Collateral damage up to $10,000 per occurrence is available for the first three (3) years. Warranty. Begins: The date of delivery to the first retail purchaser. Warta* Period Five (5). Years on Oil Cooler and three (3) years on collateral Ends After: damage coverage This warranty does not cover repair due to accidents, misuse, and excessive vibration, flying clebris, Storage damage {freezing), negligence or modification. This warranty is void If any modification or repairs are performed without authorization. This also voids any future warranty. This warranty does not cover cost of maintenance or repairs due to lack of required maintenance services as recommended. Performance of the required maintenance Conditions and and use of proper fluids are the responsibility of the owner. Exclusions: Towing is covered to the nearest distributor or authorized See Also dealer only when necessary to prevent further damage to Paragraphs your transmission. 2 thru 4 Labor costs for the removal and reinstallation of goods may be covered when necessary to make repairs. Please contact your OEM for authorization. Replacement of cooler during the warranty period is limited to 100% of reasonable labor costs up to a maximum of $700 to remove, replace, or repair the oil cooler. This limited warranty shall apply only if the product is properly maintained in accordance with Pierce's maintenance instructions and manuals and Is used in service which is normal to the particular model; Normal service means service which does not subject the product to stresses or impacts greater than normally Milk from careful use. If the Buyer discovers a dated or nonconformity, it must notify Pierce in writing within thirty (30) days after the date of discovery, but in any event prior to the expiration of the warranty period. THIS LIMITED WARRANTY MAY NOT BE ASSIGNED OR OTHERWISE TRANSFERRED BY THE BUYER TO ANY SUBSEQUENT USER OR PURCHASER OR TO ANY OTHER PERSON OR ENTITY. 2/22/2012 WA0216 Notwithstanding anything to the contrary herein. Pierce makes no warranty whatsoever as to: (a) any Integral parts. components, attachments or trade accessories of or to the product that are not manufactured by Pierce, including but not limited to engines, transmissions, . driveGnes, axles, water pumps and generators: with respect to all such parts, components, attachments and accessories, Pierce shah assign to Buyer the applicable warranties, if any, made by the respective manufacturers thereof, (b) any vehicle, chassis, or component. pan, attachment or accessory damaged by misuse, neglect, fire, exposure to severe environmental .or chemical conditions, acidic environment, improper maintenance, accident crash, or force majeure: such as natural disaster, lightning, earthquake, windstorm, hail, flood, war or riot; (c) any vefricle, chassis or component, pan, attachment or accessory that has been repaired. altered or assembled in any way by any person or entity other than Pierce wIM,.In the sole judgment of Pierce, adversely affects the performance, stability or purpose for which it was manufactured; or (d) products or parts which may in the ordinary course wear out and -have to be replaced . during the warranty period, Including, but not limited lo, tires. fluids, gaskets and fight bulbs. Pierce assumes no responsibility, for the assembly of its parts or subassemblies into finishing products or vehicles unless the assembly is performed by Pierce. The original purchaser may void this warranty in part or in Its entirety Ache product is repaired or replaced (a) without prior written'approval of the Pierce Customer Service Department or (b) at a facility which has not been approved by Pierce as to technical capability. Any repairs, modifications, alterations or aftermarket pans added after manufacture without the authorization of Pierce may void this warranty. Y, DSCI.AIMERS OF WARRANTIES THE WARRANTY SET FORTH IN PARAGRAPH 1 IS THE SOLE AND EXCLUSIVE WARRANTY GIVEN BY PIERCE. PIERCE HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES, WHETHER EXPRESS, IMPUED OR STATUTORY, . INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY, ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, AND ANY WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE. 3, BUYER'S MUSNE REMEDY. If the product fails to conform to the warranty set forth in paragraph 1 during the warranty . period, and such nonconformity Is not due to misuse, neglect, accident or improper maintenance, Buyer must notify Pierce within the time period specified in paragraph 1, and shall make: the product available for inspection by Pierce or its designated agent. At the request of Pierce, any allegedly defective product shall returned ioPierce by Buyer for examination and/or repair. Buyer shall be responsible for the cost of such transportation, and for risk of loss of or damage to the product during transportation. Within a reasonable time. Pierce shall repair or replace (m Pierces option and expense) any nonconforming or defective pans. Repair or replacement shall be made only by a facility approved in advance in writing by Pierce. THIS REMEDY SHALL BE THE EXCLUSIVE AND SOLE REMEDY FOR ANY BREACH OF WARRANTY.- 4 EXCLUSION OFOONSEQUMMLANDIWICIENTALDAMAGES. Notwithstanding anything to the contrary herein or in any agreement between Pierce . and Buyer, IN NO EVENT SHALL PIERCE BE LIABLE. FOR ANY CONSEQUENTIAL.. INCIDENTAL, SPECIAL, INDIRECT, OR PUNITIVE DAMAGES WHATSOEVER, WHETHER ARISING OUT OF BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR OTHER THEORY OF LAW OR EQUITY, WITH RESPECT TO VEHICLES OR OTHER PRODUCTS SOLD BY PIERCE, OR THEIR OPERATION OR FAILURE TO OPERATE, OR ANY DEFECTS THEREIN, OR ANY UNDERTAKINGS, ACTS OR OMISSIONS, RELATED THERETO, REGARDLESS OF WHETHER PIERCE HAS BEEN INFORMED OF THE .POSSIBILITY OF ANY SUCH DAMAGES. Without limiting the generality of the foregoing, Pierce specifically disclaims any liability for property or personal injury damages, penalties, damages for lost profits or revenues. loss of vehicles or products or any associated equipment, cost of substitute vehicles or products, down -time; delay damages. any other types of economic loss, or for any claims by any third party for any such damages. Note: Any Surety Bond, if part of the sale of the vehicle as to which this limited warranty is provided, applies only to this Pierce Basic One Year Limited Warranty for such vehicle, and not to other warranties made by Pierce In a separate document (A any)'. or to &a warranties (it any) made by any manufacturer (other than Pierce) of any part, component, attachment or accessory that is incorporated into or attached to the vehicle. Fire and Rescue Apparatus Ten (10) Year Structural Integrity Apparatus Body Limited Warranty 1,LIMITED WARRANTY Subject to the limitations and exclusions set forth below, Pierce Manufacturing provides the following warranty to the Buyer. Coverage: The apparatus body shall be free from structural failures caused by defects In material, and workmanship The date of the original purchase invoice (issued when the Warranty Begins: product ships from the factory). Warranty Period Ten (10) Years Ends After: - 0r 100,000 Miles Conditions. and This warranty applies only to the body tubular support and Exclusions: mounting structures and other structural components of the body of the vehicle model, as Identified In the Pierce See Also specifications for the Fire and Rescue Apparatus. Paragraphs 2 tlira 4 This warranty does not apply to damage caused by corrosion. This limited warranty shall apply only if the product is property maintained in accordance with Piercers maintenance instructions and manuals and is used in service which Is normal to the particular model. Normal service means service which does not subject the product to stresses or impacts greater than normally result from careful use. If the Buyer discovers a defect or nonconformity, it must notify Pierce in writing within thirty (30) days after the date of discovery, but in any event prior to the expiration of the warranty period. THIS LIMITED WARRANTY MAY NOT BE ASSIGNED OR OTHERWISE TRANSFERRED BY THE BUYER TO ANY SUBSEQUENT USER OR PURCHASER OR TO ANY OTHER PERSON OR ENTITY. 2/8/2010 WA0009 Notwithstanding anything to the contrary herein. Pierce makes no warranty whatsoever as to: (a) any Integral parts, components, attachments or trade accessories of or to the product that are not manufactured by Pierce, including but not limited to engines, transmissions, drivelines, axles, water pumps and generators; with respect to all such parts, components, attachments and accessories, Pierce shall assign to Buyer the applicable warranties, if any, made by the respective manufacturers thereof; (b) any vehicle, chassis, or component, part, attachment or accessory damaged by misuse, neglect. Ore, exposure to severe environmental or chemical conditions, addle environment, improper maintenance, accident, crash, or force majeure such as natural disaster, lightning, earthquake, windstorm, hail, flood, war or riot; (c) any vehicle, chassis or component, part, attachment or accessory that has been repaired, altered '. or assembled in any way by any person or entity, other than Pierce which, in the sole judgment of Pierce, adversely affects the performance, stability or purpose for which it was manufactured: or (d) products or parts which may in the ordinary course wear out and have to be replaced during the warranty period, Including, but not limited to, Ores, fluids, gaskets and light bulbs. Pierce assumes no responsibility for the assembly of its parts or subassemblies into finishing products or vehicles unless the assembly is performed by Pierce. The original purchaser may void this warranty in part or in its entirety if the product is repaired or replaced (a) without prior written approval of the Pierce Customer Service Department or (b) at facility which has not been approved by Pierce as to technical capability. Any repairs, modifications, alterations or aftermarket parts added after manufacture without the authorization of Pierce may void this warranty. 2 DISCLAIMERS OF WARRANTIES THE WARRANTY SET FORTH IN PARAGRAPH 1 IS THE SOLE AND EXCLUSIVE WARRANTY GIVEN BY PIERCE. PIERCE HEREBY DISCLAIMS AND EXCLUDES 'ALL OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, . INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY, ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE; AND ANY WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE.. 3. BUYER'S EXCLUSIVE REMEDY. If the product fails to conform to the warranty sat forth In paragraph 1 during the warranty period, and such nonconformity 0 not due to misuse, neglect, accident or improper maintenance, Buyermust notify Pierce within the time period specified in paragraph 1. and shall make the product available for Inspection by:Pierce of its designated agent At the request of Pierce, any allegedly defective product shall be returned to Pierce by Buyer for examination and/or repair. Buyer shall be responslble.forthe cost of such transportation, and for risk of loss of or damage to the product during transportation Within a reasonable time,. Pierce shall repair or replace (at Piercers option and expense) any nonconforming or defective parts. Repair or replacement shall be made orgy by a facility approved in advance: in writing by Pierce. THIS .REMEDY 'SHALL BE THE EXCLUSIVE AND SOLE REMEDY FOR ANY BREACH OF WARRANTY. 4 EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAG ES, Notwithstanding anything to the contrary herein or In any agreement between Pierce and Buyer, IN NO EVENT SHALL PIERCE BE LIABLE FOR ANY CONSEQUENTIAL. INCIDENTAL, SPECIAL, INDIRECT, OR PUNITIVE DAMAGES WHATSOEVER, WHETHER ARISING OUT OF BREACH OF CONTRACT, WARRANTY; TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR OTHER THEORY OF LAW OR EQUITY, WITH RESPECT TO VEHICLES OR OTHER PRODUCTS SOLD BY PIERCE, OR THEIR OPERATION OR FAILURE TO OPERATE, OR ANY DEFECTS THEREIN, OR ANY UNDERTAKINGS, ACTS OR OMISSIONS' RELATED THERETO, REGARDLESS OF WHETHER PIERCE HAS BEEN INFORMED OF THE POSSIBILITY OF ANY SUCH DAMAGES. Without limiting the generality of the foregoing,;Pierce specifically disclaims any liability for property or personal Injury damages, penalties, damages for lost profits or revenues, loss of vehicles or products or shy associated equipment, cost of substitute vehicles or products, down -time, delay damages, any other types of economic loss, or for any claims by any third party for any such damages. Note: Any Surety Bond if a part of the sale of the vehicle as to which this limited warranty is provided, applies only to this Pierce Basic One Year Limited Warranty for such vehicle, and not to other warranties made by Pierce in a separate document (if any) or to the warranties (if any) made by any manufacturer (other than Pierce) of any part, component, aftachment or accessory that is incorporated into or attached to the vehicle. Effective March 15, 2010 low AIVIDOR Inc. TERMS OF BUSINESS AND GENERAL INFORMATION Warranty:. All AMDOR Inc. roll -up door products are warranted for a period of 10 years from the date of delivery (with the exception of wet paint adhesion - please see below). AMDOR Inc. liability covers the replacement or repair of any component that fails due to defects in material and / or workmanship during the coverage period. We accept no liability for claims made for damages to any part (or parts) of a vehicle and / or machine (of any type) or injury claims by a person or persons assumed or alleged to have been brought about by the use or misuse of any product supplied by AMDOR Inc. Warranty coverage does not extend to door attachments including (but not limited to) decals, emblems, stripes and adhesives. In order to initiate the claims process please contact your authorized representative of AMDOR Inc. Warranty claims must be accompanied by a written description providing full and reasonable details as to the nature of the defect. Upon receipt of your claim arrangements will be made to inspect the defective product (if necessary). Justified warranty claims will be repaired, exchanged, or credited to the customer's account at AMDOR Inc.'s discretion. All warranty claims must be approved in writing by the Customer Service Manager for AMDOR Inc. There are no exceptions to this clause.. Limited warranty coverage includes the labor associated with the disassembly and assembly of products deemed to be defective by AMDOR Inc. Labor allowances are based on a set time schedule as determined by AMDOR Inc. The maximum allowable hourly labor rate is $ 50. All warranty labor claims must be approved in writing by an authorized representative of AMDOR Inc. prior to commencement of work. Allowances for removal and installation: Curtain replacement: 3/4 hour Balancer replacement: 1 hour Door ajar switch 3/4 hour Bottom Panel Assembly: 1/2 hour Slat replacement: 3/4 hour Door removal and replacement 1 1/2 hours Items authorized for return must be accompanied by a Return Goods Authorization (RGA) number. We will accept collect shipments of items deemed to be defective. provided that they are returned via the most economical carrier. Should items be returned by means other than the most economical carrier the difference will be charged back to the sender. AMDOR Inc. reserves the right to reject any claim when a product has been opened, interfered with or modified. Claims may also be rejected when damage to the product (or any sub- assembly) has been brought about by accident, misuse, abuse, vandalism, incorrect installation, temperature extremes, chemical exposure or any factor other than regular operating conditions. Limited Wet Paint Match Adhesion Warranty AMDOR Inc. warrants wet paint finishes applied by AMDOR utilizing our, approved factory paint specification. All wet paint match colors must be approved in writing by an authorized OEM representative. AMDOR Inc. will provide a color spray out for this purpose. The time required for shipping and consideration of initial color spray outs will be considered over and above_ stated lead times. Warranty coverage will extend for a period of not less than 5 years from the date of delivery as determined by AMDOR Inc.'s Packing Slip. AMDOR reserves the right to determine whether individual units will be replaced and / or repaired by an AMDOR approved vendor. An allowance will be made for labor associated with the disassembly and assembly of individual units at the prescribed hourly rate of $ 50 per hour. Compensation for labor will not exceed the maximum time allowance permitted for door removal and replacement. Written approval including specified allowance for time must be obtained from AMDOR prior to initiating work. Warranty coverage will extend to the following visible paint system defects: 1./ Loss of mechanical adhesion as evidenced by peeling, cracking or blistering which exposes the substrate material. 2.1 Corrosion of the substrate due to paint system failure. 3./ Fading which results in a substantial departure from the primary AMDOR approved body color. Wet paint adhesion limited warranty coverage will be excluded when damages to the system are determined by AMDOR Inc. to be a result of the following: 1./ Damage caused through the use of attachments including (but not limited to) decals, labels, adhesives, non factory approved coatings. 21 Loss of gloss, discoloration or damage due to improper maintenance (including but not limited to) mechanical wash systems, pressure washers, steam cleaners, non approved wash or polishing agents. 3./ Abuse, acts of nature, excessive heat / cold, chemical exposure, vandalism and / or accidents. 4./ Scratches, chips, abrasions, or dents from any source. This document supercedes all previous written and / or verbal warranties provided by AMDOR Inc. and / or it's affiliates. Fire and Rescue Apparatus Six (6) Year Material and Workmanship PUC Pump i e 1. LIMITED WARRANTY Subject to the limitations and exclusions set forth below, Pierce Manufacturing provides the following warranty to the Buyer. This limited warranty shall apply only if the product Is property maintained In accordance with Pierce's maintenance '. instructions and manuals and is used'in:service which is normal to the parti cular model. Normal service means service which does not subject the product to stresses or impacts greater than normally result from careful use - If the Buyer discovers a defect or nonconformity. It must notify Pierce in writing within thirty (30) days after the date of discovery, but in any event prior to the expiration of the warranty period. THIS UMITED WARRANTY MAY NOT BE ASSIGNED OR OTHERWISE TRANSFERRED BY THE BUYER TO ANY SUBSEQUENT USER OR PURCHASER OR TO ANY OTHER PERSON OR ENTITY. 2/8/2010 WA0039 Notwithstanding anything to the contrary herein, Pierce makes no warranty whatsoever as to: (a) any Integral parts, components, attachments or trade accessories of or to the product that are not manufactured by Pierce, including but not limited to engines, transmissions, . drivelinas, axles, water pumps and generators;. with respect to all Such parts, components, attachments and accessories, Pierce shall assign to Buyer the applicable warranties, If any, made by the respective manufacturers thereof; (b) any vehicle, chassis, or component, part„ attachment or accessory damaged by misuse, neglect, fire, exposure to severe environmental or chemical conditions, acidic environment, improper maintenance, accident, crash, or forcemajeure such as natural disaster. lightning, earthquake, windstorm, hail, flood; war or riot; (c) any vehicle, chassis or component, part, attachment or accessory thal,has been repaired, altered or assembled in any way by any person or amity other than Pierce which, in the sole, judgment of Pierce; adversely affects the performance, stability or purpose for which it was manufactured; or (d) products or parts which they in the ordinary course wear out and have to be replaced during the warranty period, including, but not limited to, tires, fluids, gaskets and light bulbs. Pierce assumes no responsibility for the assembly of its parts or subassemblies into finishing products or vehicles unless the assembly is performed by Pierce. The original purchaser may void this warranty in part or'in'its entirety If-the product is repaired or replaced (a) without prior written approval of the Pierce Customer Service Department; or (b) at a facility which has not been approved by Pierce as to technical capability. Any repairs, modifications, alterations or aftermarket parts added after manufacture without the authorization of Pierce may void this warranty. 2. DISCLAIMERS OF WARRANTIES THE WARRANTY SET FORTH IN PARAGRAPH 1 IS THE SOLE AND EXCLUSIVE WARRANTY GIVEN BY PIERCE. PIERCE HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES. WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY,-ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, AND ANY WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE. 3. BUYER'S EXCLUSIVE REMEDY. If the product fails to conform to the warranty set forth in paragraph 1 during the warranty period, and such nonconformity is not due to misuse, neglect, accident or improper maintenance, Buyer must notify Pierce within the time period specified. in paragraph 1, and shall make the product available for inspection by Pierce or its designated 'agent At the request of Pierce,, any allegedly defective product shallbe returned to Pierce by Buyer for examination andror repair. Buyer shall be responsible for the cost of such transportation, and for risk of loss of or damage to the product during transportation. Within a reasonable time, Pierce shall repair or replace (at Pierce's option and expense) any nonconforming or defective parts. Repair or replacement shall be made only by a facility approved in advance in writing by Pierce. THIS REMEDY SHALL BE THE EXCLUSIVE AND SOLE REMEDY FOR ANY BREACH OF WARRANTY. 4. EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAG ES. Notwithstanding anything to the contrary herein or in any agreement between Pierce and Buyer, IN NO EVENT SHALL PIERCE BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, SPECIAL, INDIRECT, OR PUNITIVE DAMAGES WHATSOEVER, WHETHER ARISING OUT OF BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIG ENCE AND STRICT.LIABILITY) OR OTHER THEORY OF LAW OR EQUITY, WITH RESPECT TO VEHICLES OR OTHER PRODUCTS SOLD. BY PIERCE, OR THEIR OPERATION OR FAILURE TO OPERATE, OR ANY DEFECTS THEREIN, OR ANY UNDERTAKINGS, ACTS OR OMISSIONS RELATED THERETO, REGARDLESS OF WHETHER PIERCE HAS BEEN INFORMED OF THE POSSIBILITY OF ANY SUCH DAMAGES. Without limiting the generality of the foregoing, Pierce specifically disclaims any liability for property or personal injury damages, penalties, damages for lost profits or revenues, loss of vehicles or products or any associated equipment, cost of substitute vehicles or products, down4ime, delay damages, any other types of economic loss, or for any Claims by any third party for any such damages. Note. Any Surety Bond, if a part of the safe of the vehicle as to which this limited warranty is provided applies only to this Pierce Basic One Year Limited Warranty for such vehicle, and not to other warranties made by Pleme in a separate document litany) or to the warranties (if any) made by any manufacturer (other than Pierce) of any part, component, attachment or accessory that is incorporated into or attached to the vehide. The PUC Pump and Its components manufactured under the Coverage: ' Pierce brand in its Fire and Rescue Apparatus vehicle shall be free from failures caused by defects In material and workmanship The date of the original purchase invoice (issued when the Warranty Begins; product ships from the factory). Warranty. Period 'Six(6)Years Ends After. 3000 3000 Pump Hours Conditions and This limited warranty applies to the PUC Pump and all its Exclusions: components manufactured under the Pierce: brand Items not manufactured under the Pierce brand such as valves, relief See Also See Also valves or wear Items such as wear rings, seals, bearings or raga boats of removal, transporting, storing, or reinstallation are ..not covered by this six-year limited warranty and are Instead 2 covered under the Pierce Basic One Year Limited Warranty. This limited warranty shall apply only if the product Is property maintained In accordance with Pierce's maintenance '. instructions and manuals and is used'in:service which is normal to the parti cular model. Normal service means service which does not subject the product to stresses or impacts greater than normally result from careful use - If the Buyer discovers a defect or nonconformity. It must notify Pierce in writing within thirty (30) days after the date of discovery, but in any event prior to the expiration of the warranty period. THIS UMITED WARRANTY MAY NOT BE ASSIGNED OR OTHERWISE TRANSFERRED BY THE BUYER TO ANY SUBSEQUENT USER OR PURCHASER OR TO ANY OTHER PERSON OR ENTITY. 2/8/2010 WA0039 Notwithstanding anything to the contrary herein, Pierce makes no warranty whatsoever as to: (a) any Integral parts, components, attachments or trade accessories of or to the product that are not manufactured by Pierce, including but not limited to engines, transmissions, . drivelinas, axles, water pumps and generators;. with respect to all Such parts, components, attachments and accessories, Pierce shall assign to Buyer the applicable warranties, If any, made by the respective manufacturers thereof; (b) any vehicle, chassis, or component, part„ attachment or accessory damaged by misuse, neglect, fire, exposure to severe environmental or chemical conditions, acidic environment, improper maintenance, accident, crash, or forcemajeure such as natural disaster. lightning, earthquake, windstorm, hail, flood; war or riot; (c) any vehicle, chassis or component, part, attachment or accessory thal,has been repaired, altered or assembled in any way by any person or amity other than Pierce which, in the sole, judgment of Pierce; adversely affects the performance, stability or purpose for which it was manufactured; or (d) products or parts which they in the ordinary course wear out and have to be replaced during the warranty period, including, but not limited to, tires, fluids, gaskets and light bulbs. Pierce assumes no responsibility for the assembly of its parts or subassemblies into finishing products or vehicles unless the assembly is performed by Pierce. The original purchaser may void this warranty in part or'in'its entirety If-the product is repaired or replaced (a) without prior written approval of the Pierce Customer Service Department; or (b) at a facility which has not been approved by Pierce as to technical capability. Any repairs, modifications, alterations or aftermarket parts added after manufacture without the authorization of Pierce may void this warranty. 2. DISCLAIMERS OF WARRANTIES THE WARRANTY SET FORTH IN PARAGRAPH 1 IS THE SOLE AND EXCLUSIVE WARRANTY GIVEN BY PIERCE. PIERCE HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES. WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY,-ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, AND ANY WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE. 3. BUYER'S EXCLUSIVE REMEDY. If the product fails to conform to the warranty set forth in paragraph 1 during the warranty period, and such nonconformity is not due to misuse, neglect, accident or improper maintenance, Buyer must notify Pierce within the time period specified. in paragraph 1, and shall make the product available for inspection by Pierce or its designated 'agent At the request of Pierce,, any allegedly defective product shallbe returned to Pierce by Buyer for examination andror repair. Buyer shall be responsible for the cost of such transportation, and for risk of loss of or damage to the product during transportation. Within a reasonable time, Pierce shall repair or replace (at Pierce's option and expense) any nonconforming or defective parts. Repair or replacement shall be made only by a facility approved in advance in writing by Pierce. THIS REMEDY SHALL BE THE EXCLUSIVE AND SOLE REMEDY FOR ANY BREACH OF WARRANTY. 4. EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAG ES. Notwithstanding anything to the contrary herein or in any agreement between Pierce and Buyer, IN NO EVENT SHALL PIERCE BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, SPECIAL, INDIRECT, OR PUNITIVE DAMAGES WHATSOEVER, WHETHER ARISING OUT OF BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIG ENCE AND STRICT.LIABILITY) OR OTHER THEORY OF LAW OR EQUITY, WITH RESPECT TO VEHICLES OR OTHER PRODUCTS SOLD. BY PIERCE, OR THEIR OPERATION OR FAILURE TO OPERATE, OR ANY DEFECTS THEREIN, OR ANY UNDERTAKINGS, ACTS OR OMISSIONS RELATED THERETO, REGARDLESS OF WHETHER PIERCE HAS BEEN INFORMED OF THE POSSIBILITY OF ANY SUCH DAMAGES. Without limiting the generality of the foregoing, Pierce specifically disclaims any liability for property or personal injury damages, penalties, damages for lost profits or revenues, loss of vehicles or products or any associated equipment, cost of substitute vehicles or products, down4ime, delay damages, any other types of economic loss, or for any Claims by any third party for any such damages. Note. Any Surety Bond, if a part of the safe of the vehicle as to which this limited warranty is provided applies only to this Pierce Basic One Year Limited Warranty for such vehicle, and not to other warranties made by Pleme in a separate document litany) or to the warranties (if any) made by any manufacturer (other than Pierce) of any part, component, attachment or accessory that is incorporated into or attached to the vehide. �r Fire and Rescue Apparatus Ten (10) Year Pro -Rated Paint and Corrosion Cab Subject to the limitations and exclusions set forth below, Pierce Manufacturing provides the following warranty to the Buyer. This limited warranty shall apply wily if the product is properly maintained in accordance with Pierce's maintenance instructions and manuals and is used In service which is normal to the particular model. Normal service means service which does not subject the product to stresses or impacts greater than normally result from careful use. It the Buyer discovers a defect or nonconformity, it must notify Pierce In writing within thirty (30) days after the date of discovery. but in any event prior to the expiration of the warranty period. THIS LIMITED WARRANTY MAY NOT BE ASSIGNED OR OTHERWISE. TRANSFERRED BY THE BUYER TO ANY SUBSEQUENT USER OR PURCHASER OR TO ANY OTHER PERSON OR ENTITY. 2/8/2010 WA0055 Notwithstanding anything to the contrary herein, Pierce makes no warranty whatsoever as to: (a) any Integral parts, components, attachments or trade accessories of ar to the product that are not manufactured by Pierce, including but not limited to engines, transmissions; drivelines, aides, water pumps and generators; with respect to all such parts, components, attachments and accessories, Pierce shall assign to Buyer the applicable warranties, if any, made by the respective manufacturers therect, (b) any vehicle, chassis, or component. part, attachment or accessary damaged by misuse, neglect, fire, exposure to severe environmental or chemical conditions, acidic environment, improper maintenance, accident, sash, or force majeure such as natural disaster, lightning, earthquake, windstorm, hail flood, war or riot (c) any vehicle; chassis or component, part, attachment or accessory that has; been repaired, altered or assembled in any way by any person or entity other than Pierce which, in the sole judgment of Pierce, adversely affects the performance „stability Of purpose for which it was manufactured; or (d) products or parts which may in the ordinary course wear cut and have to be replaced during the warranty period. including, but not limited to, tires, fluids, gaskets and light bulbs.. Pierce assumes no responsibility for the assembly of.its parts or. subassemblies Into finishing products or vehicles unless the assembly is performed by Pierce. The original purchaser may void this warranty in part or In its entirety If the product is repaired or replaced (a) without prior written approval of the Pierce Customer Service Department; or (b) at a facility which has not been approved by Pierce as to technical capability. Any repairs, modifications, alterations or aftermarket parts added after manufacture without the authorization of Pierce may void this warranty. 7 DISCLAIMERS OF WARRANTIES THE WARRANTY SET FORTH IN PARAGRAPH 1 IS THE SOLE AND EXCLUSIVE WARRANTY GIVEN BY PIERCE. PIERCE HERESY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY, ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. AND ANY WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE 00 TRADE. 3. BUYER'S EXCLUSIVE REMEDY. If the product fails to conform to the warranty set font in paragraph / during the warranty period, and such nonconfonhky is not due to misuse, neglect, accident or improper maintenance,. Buyer must notify Pierce within the time period specified in paragraph 1, and shall make the product available for inspection by Pierce or its designated agent. At the request of Pierce, any allegedly defective product shall be returned to Pierce by Buyer for examination andfor repair. Buyer shag be responsible for the cost of such transportation, and for risk of loss of or damage to the:product during transportation. Within a reasonable. time, Pierce shall repair or replace (at Pierce's option and expense) any nonconforming or defective parts. Repair or replacement shall be made only by a facility approved In advance in writing by Pierce. THIS REMEDY SHALL BE THE EXCLUSIVE AND SOLE REMEDY FOR ANY BREACH OF WARRANTY, 4. EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAG ES. Notwithstanding anything to the contrary herein or in any agreementbei waen Pierce and Buyer, iN NO EVENT SHALL PIERCE BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, SPECIAL, INDIRECT, OR PUNITIVE DAMAGES WHATSOEVER,. WHETHER ARISING OUT OF BREACH OF CONTRACT, WARRANTY, TORT (INCLUDINGNEGLIGENCEAND STRICT LIABILITY) OR OTHER THEORY OF LAW OR EQUITY, WITH RESPECT TO VEHICLES OR OTHER PRODUCTS SOLD BY PIERCE, OR THEIR OPERATION OR FAILURE TO OPERATE, OR ANY DEFECTS THEREIN, OR ANY UNDERTAKINGS, ACTS OR OMISSIONS RELATED THERETO. REGARDLESS OF WHETHER PIERCE HAS BEEN INFORMED OF THE POSSIBILITY' OF ANY SUCKDAMAGES. Without limiting the generality of thelbregoing „Pierce specifically disclaims any liability for property or personal injury damages, penalties, damages for lost profits or revenues, loss of vehicles or products or any associated equipment cost of substitute vehicles or products, dawn -time, delay damages, any other types of economic loss, or for any claims by any third party for any such damages. Note: Any Surely Bond. if a pail of the safe of the vehicle as to which this limited warranty Is provided, applies only to this Fierce Basic One Year Limited Warranty for such vehicle, and not to other warranties made by Pierce in a separate document (if any) or to the warranties (if any) made by any manufacturer (other than Pierce) of any part component, attachment or accessory that is incorporated into or attached to the vehicle. Exterior surfaces of the cab painted by Pierce shall be free from blistering, peeling, contusion or any other adhesion Coverage: defect caused by defective manufacturing methods or paint material selection. The date of the original purchase Invoice (Issued when the Warranty Begins: product ships from the factory). Warranty Period Ten(10)Years Ends After. This limited warranty Is applicable to the vehicle In the following percentage costs of warranty repair, if any: Topcoat Durability 6 Appearance: Gloss, Color Retention & Cracking 0.72 months 100% 73-96 months 60% 87 -120 months 25% Integrity of Coating System: Adhesion, Blistering /Bubbling 0.36 months 100% 37-84 months 50% 85.120 months 25% Conditions and Corrosion: Dissimilar Metal and Crevice Exclusions: 0-36 months 100% See Also 37-48 months 50% Paragraphs rag 49-72 months 25% 2 4 73 -120 months 10% Corrosion Perforation 0 -120 months 100Y. This limited warranty appiles only to exterior paint. Paint on the vehicle's interior Is warranted only under the Pierce Basic One Year Limited Warranty. Items not covered by this warranty Include: (a) Damage from lack of maintenance and cleaning (proper cleaning and maintenance procedures are detailed In the Pierce operation and maintenance manual). (b) UV paint fade. (c) Any cab not manufactured by Pierce. This limited warranty shall apply wily if the product is properly maintained in accordance with Pierce's maintenance instructions and manuals and is used In service which is normal to the particular model. Normal service means service which does not subject the product to stresses or impacts greater than normally result from careful use. It the Buyer discovers a defect or nonconformity, it must notify Pierce In writing within thirty (30) days after the date of discovery. but in any event prior to the expiration of the warranty period. THIS LIMITED WARRANTY MAY NOT BE ASSIGNED OR OTHERWISE. TRANSFERRED BY THE BUYER TO ANY SUBSEQUENT USER OR PURCHASER OR TO ANY OTHER PERSON OR ENTITY. 2/8/2010 WA0055 Notwithstanding anything to the contrary herein, Pierce makes no warranty whatsoever as to: (a) any Integral parts, components, attachments or trade accessories of ar to the product that are not manufactured by Pierce, including but not limited to engines, transmissions; drivelines, aides, water pumps and generators; with respect to all such parts, components, attachments and accessories, Pierce shall assign to Buyer the applicable warranties, if any, made by the respective manufacturers therect, (b) any vehicle, chassis, or component. part, attachment or accessary damaged by misuse, neglect, fire, exposure to severe environmental or chemical conditions, acidic environment, improper maintenance, accident, sash, or force majeure such as natural disaster, lightning, earthquake, windstorm, hail flood, war or riot (c) any vehicle; chassis or component, part, attachment or accessory that has; been repaired, altered or assembled in any way by any person or entity other than Pierce which, in the sole judgment of Pierce, adversely affects the performance „stability Of purpose for which it was manufactured; or (d) products or parts which may in the ordinary course wear cut and have to be replaced during the warranty period. including, but not limited to, tires, fluids, gaskets and light bulbs.. Pierce assumes no responsibility for the assembly of.its parts or. subassemblies Into finishing products or vehicles unless the assembly is performed by Pierce. The original purchaser may void this warranty in part or In its entirety If the product is repaired or replaced (a) without prior written approval of the Pierce Customer Service Department; or (b) at a facility which has not been approved by Pierce as to technical capability. Any repairs, modifications, alterations or aftermarket parts added after manufacture without the authorization of Pierce may void this warranty. 7 DISCLAIMERS OF WARRANTIES THE WARRANTY SET FORTH IN PARAGRAPH 1 IS THE SOLE AND EXCLUSIVE WARRANTY GIVEN BY PIERCE. PIERCE HERESY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY, ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. AND ANY WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE 00 TRADE. 3. BUYER'S EXCLUSIVE REMEDY. If the product fails to conform to the warranty set font in paragraph / during the warranty period, and such nonconfonhky is not due to misuse, neglect, accident or improper maintenance,. Buyer must notify Pierce within the time period specified in paragraph 1, and shall make the product available for inspection by Pierce or its designated agent. At the request of Pierce, any allegedly defective product shall be returned to Pierce by Buyer for examination andfor repair. Buyer shag be responsible for the cost of such transportation, and for risk of loss of or damage to the:product during transportation. Within a reasonable. time, Pierce shall repair or replace (at Pierce's option and expense) any nonconforming or defective parts. Repair or replacement shall be made only by a facility approved In advance in writing by Pierce. THIS REMEDY SHALL BE THE EXCLUSIVE AND SOLE REMEDY FOR ANY BREACH OF WARRANTY, 4. EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAG ES. Notwithstanding anything to the contrary herein or in any agreementbei waen Pierce and Buyer, iN NO EVENT SHALL PIERCE BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, SPECIAL, INDIRECT, OR PUNITIVE DAMAGES WHATSOEVER,. WHETHER ARISING OUT OF BREACH OF CONTRACT, WARRANTY, TORT (INCLUDINGNEGLIGENCEAND STRICT LIABILITY) OR OTHER THEORY OF LAW OR EQUITY, WITH RESPECT TO VEHICLES OR OTHER PRODUCTS SOLD BY PIERCE, OR THEIR OPERATION OR FAILURE TO OPERATE, OR ANY DEFECTS THEREIN, OR ANY UNDERTAKINGS, ACTS OR OMISSIONS RELATED THERETO. REGARDLESS OF WHETHER PIERCE HAS BEEN INFORMED OF THE POSSIBILITY' OF ANY SUCKDAMAGES. Without limiting the generality of thelbregoing „Pierce specifically disclaims any liability for property or personal injury damages, penalties, damages for lost profits or revenues, loss of vehicles or products or any associated equipment cost of substitute vehicles or products, dawn -time, delay damages, any other types of economic loss, or for any claims by any third party for any such damages. Note: Any Surely Bond. if a pail of the safe of the vehicle as to which this limited warranty Is provided, applies only to this Fierce Basic One Year Limited Warranty for such vehicle, and not to other warranties made by Pierce in a separate document (if any) or to the warranties (if any) made by any manufacturer (other than Pierce) of any part component, attachment or accessory that is incorporated into or attached to the vehicle. Fire and Rescue Apparatus Three (3) Year Material and Workmanship Goldstar® Gold Leaf Lamination 1, LIMITED WARRANTY Subject to the limitations and exclusions set forth below, Pierce Manufacturing provides the following warranty to the Buyer. Coverage: Each Goldstar® gold leaf lamination shall be free from defects In material and workmanship. Warranty Begins: The date of the original purchase invoice (issued when the product ships from the factory). Warranty Period Three (3) Years Ends After. Conditions and Exclusions. This warranty does not cover damage from lack of maintenance and cleaning (proper cleaning and maintenance See Also procedures are detailed in the Pierce operation and paragraphs maintenance manual). 2 thru 4 This limited warranty shall apply only K the product is property maintained in accordance with.Pierce's maintenance instructions and manuals and Is used in service which is normal to the particular model. Normal service means service which does not subject the product to stresses or impacts greater then: normally result from careful use. If the Buyer discovers adefect or nonconformity, it must notify Pierce in writing within thirty (30) days after the date of discovery, but in any event prior to the expiration of the warranty period. THIS LIMITED WARRANTY MAY NOT BE ASSIGNED OR OTHERWISE TRANSFERRED BY THE BUYER TO ANY SUBSEQUENT USER OR PURCHASER OR TO ANY OTHER PERSON OR ENTITY. 2/22/2010 WA0018 Notwithstanding anything to the contrary herein, Pierce makes no warranty whatsoever as to: (a) any integral parts, components, attachments or trade accessories of or to the product that are not manufactured by Pierce, including but not limited to engines, transmissions, drivelinesi axles, water pumps and generators; with respect to all such parts, components, attachments and accessories, Pierce shall assign to.Buyer the applicable warranties, if any, made by the respective manufacturers thereat; (b) any vehicle, chassis, or component, part, attachment or accessory damaged by misuse, neglect fire, exposure to severe environmental or chemical conditions. acidic environment, improper maintenance, accident, crash, or force majeure such as natural disaster, lightning, earthquake, windstorm, hail, flood, war or not (c) any vehicle, chassis or component, part, attachment or accessory that has been repaired, altered or assembled in anyway by any person or entity other than Pierce which, in the sole judgment of Pierce, adversely affects the performance. stability or purpose for which it was manufactured; or (d) products or, parts which may in the ordinary course wear out and have to be replaced during the warranty period, Including, but not limited to, Ores, fluids, gaskets and light bulbs. Pierce assumes no responsibility for the assambly of its parts or subassemblies Into finishing products or vehicles unless Lire assembly Is performed by Pierce. The original purchaser may void this warranty in part or in its entirety if the product is repaired or replaced (a) without prior written approval of the Pierce Customer Service Department or (b) at a.facility which has not been approved by Pierce as to technical capability. Any repairs, modifications, alterations or aftennarket parts added after .manufacture without the authorization of Pierce may void this warranty. 2. DISCLAIMERS OF WARRANTIES THE WARRANTY SET FORTH IN PARAGRAPH 1 tS THE .SOLE .AND EXCLUSIVE WARRANTY GIVEN BY PIERCE. PIERCE HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES, WHETHEREXPRESS, IMPLIED OR STATUTORY, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY, ANY WARRANTY OF FITNESS FOR A,PARTICULAR PURPOSE, AND ANY WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE. 3. BUYER'S EXCLUSIVE REMEDY, If the product fails to conform to the warranty set forth in paragraph 1 during the warranty period, and suchmoncomornity is not due to misuse, negiecL accident or Improper maintenance, Buyer must notify Pierce within the time period specified in paragraph 1, and shall make the product available for inspection by Pierce or its designated agent At the request of Pierce, any allegedly defective product shall be returned to Pierce by Buyer for examination andlor repair. Buyer shall be responsible for the cost of such transportation, and for risk of loss of or damage to the product during transportation. Within a reasonable time, Pierce shall repair or replace.(at Pierces option and expense) any nonconforming or defective parts. Repair or replacement shall be made only by facility approved in advance in writing by Pierce. THIS REMEDY SHALL BE THE EXCLUSIVE AND SOLE REMEDY FOR ANY BREACH OF WARRANTY. 4. EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAG ES. Notwithstanding anything,to the contrary herein or.in any agreement between Pierce and Buyer, IN NO EVENT SHALL PIERCE BE LIABLE FOR ANY CONSEQUENTIAL. INCIDENTAL, SPECIAL, INDIRECT, OR PUNITIVEDAMAGES�WHATSOEVER, WHETHER ARISING OUT OF BREACH OFCONTRACT,.WARRANTY, TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR OTHER THEORY OF LAW OR EQUITY, WITH RESPECT TO VEHICLES OR OTHER PRODUCTS SOLD BY PIERCE, OR THEIR OPERATION OR FAILURE TO OPERATE, OR ANY DEFECTS THEREIN, OR ANY UNDERTAKINGS. ACTS OR OMISSIONS. RELATED THERETO, REGARDLESS OF WHETHER PIERCE HAS BEEN INFORMED OF THE POSSIBILITY OF ANY SUCH DAMAGES. Without limiting the generality of the foregoing, Pierce specifically disclaims any liability for property or personal injury damages, penalties, damages for lost profits or revenues, loss of vehicles or products or any associated equipment, cost of substitute vehicles or products, down -time, delay damages, any other types of economic loss, or for any claims by any third party for any such damages. Note: Any Surely Bond, it a part of the sale of the vehicle as to which this limited warranty is provided, applies only to this Pierce Basic One Year Limited Warranty for such vehicle, and not to other warranties made by Pierce in a separate document (if any) or to the warranties (if any) made by any manufacturer (other than Pierce) of any part, component. attachment or accessory that is incorporated into or attached to the vehicle. PIERCE MANUFACTURING INC.® AN OSHKOSH. TRUCK CORPORATION* COMPANY Certification Document CD0010 Quantum® Cab Integrity Certification Pierce Manufacturing certifies the integrity of the Quantum cab relative to occupant protection. A specimen representing the substantial structural configuration of the Quantum cab model has been successfully tested in accordance with the following standards. ® SAE. J2422 Cab Roof Strength Evaluation — Quasi- Static Loading Heavy Trucks. J ® .European Occupant Protection Standard ECE Regulation No. 29. SAE J2420 COE Frontal Strength Evaluation — Dynamic Loading Heavy Trucks. Side Impact: The test cab was subjected to dynamic preload where a 14,000 lb moving barrier was slammed into the side of the cab at 5.9 mph, striking with an impact of 16,000 ft-lbs of energy. This test is not required to meet the ECE 29 standard, but is part of the SAE J2422 test procedure and more closely represents the forces a cab will see in a roll -over incident. Roof Crush: This same test cab was then subjected to a roof crush force of 24.000 lbs. This value meets the ECE 29 criteria, which must be equivalent to the front axle rating up to a maximum of 10 metric tons. Additional Roof Crush: The same cab was then loaded with 60,000 lbs on the roof, exceeding the ECE test by 2.5 times! CD0010 Cab Integrity Certification - Quantum 040107 1 7/8/2008 Frontal Impact The test cab was struck by the 14,000 lb moving barrier at a speed sufficient to impart the required 36,325 ft -Ibs of energy. The cab survived this second blow without compromising the survival space of any occupant area. Additional Frontal Impact: The same cab was then struck a third time at a higher speed to impart 71,000 ft-Ibs of energy into the cab (twice the ECE 29 level of energy). The cab survived this third blow, again without compromising the survival space of any occupant area. Pass -Fail criteria of the SAE tests and the ECE 29 test is a measure of whether the "survival space" inside the cab is compromised during any of the test loads. The Pierce cab withstood all integrity tests on the same cab without any measurable intrusion into the survival space of the occupant area. Witnessed and Certified by: Pierce Manufacturing, Inc. G.....' Sib ,p APPIEtON.. �8�4MAL g�3 James Roger Lackore, PE October 4, 2002 CD0010 Cab Integrity Certification- Quantum 040107 L 7/8/2008 PIERCE MANUFACTURING INC.® AN OSHKOSH CORPORATION* COMPANY Certification Document CDO098 Power Steering System Pierce Manufacturing, Inc. certifies that the power steering system as installed in our custom chassis meets the requirements of the component supplier, the NFPA 1901 and NFPA 1906 guidelines as applicable, and Pierce internal design standards. VALIDATION TEST: RD1987, RD2055 RD2056, RD2057, RD2058, RD2059 Pierce Manufacturing, Inc. David W. Archer Director of Engineering June 03, 2011 CDO098 Power Steering System 110623.doc 1 10/1412014 PIERCE MANUFACTURING INC.® AN OSHKOSH CORPORATIOle COMPANY Certification Document CDO045 Quantum® Air Conditioning Pierce Manufacturing certifies the performance of the Quantum® cab air conditioning system. The air conditioning system was tested successfully in an environmental chamber Air conditioning performance testing was conducted at an ambient of 100 °F and 50 percent relative humidity. Engine speed was maintained at high idle rpm with the controls set to maximum cooling. The vehicle was heat soaked in the environmental chamber. All temperature probes were monitored to confirm temperature stabilization. The transient test began when all the vehicle doors were closed and the air conditioning turned on. The average cab temperature dropped to 73° F within 30 minutes. CHART 1: PIERCE ".QUANTUM" A!C PERFORMANCE PIERCE "QUANTUM" FRC - - - -•• AMBIENT(`F) AIC PULLIDOwN -CAB AVE ff ) 100 °F 50% RH AMBIENT Wo n6 �J 3 eFQ� 90. .. .. __ - Y 65 -- ... Y7 TO 55 •5 0 5 10 15 20 25 30 35 40 45 50 55 60 THE (MINUTES) r2no a>45 VALIDATION TEST: RD1041 Pierce Manufacturing, Inc. LNE��s gene � i ;a VA ►� o� ' MAL James Roger Lackore, PE March 31, 2009 CDO045 Air Conditioning - Quantum 090330 1 4/3/2009 Effective 1 August, 2009 W - -- z W ® W g Z Ao J MUM Lu W �n r J UM LLI V 000 �^ j< F Z CL Aid _. W 0 LU P1 0 J Z J -400 0 11. to LIFETIME SERVICE WARRANTY United Plastic Fabricating, Inc. (hereinafter called "UPF ") warrants each POLY TANK®, Booster /Foam Tank POLYSIDEO Wetside Tank, Integrator Tank/Body, ELLIPSETm Elliptical Tank, Ellip -T -Tank Tank and DEFENDER TM Skid Tank to be free from defects in material and workmanship for the service life of the original vehicle (vehicle must be actively used in an emergency re- sponse for fire suppression). All UPF Tanks must be installed and operated in accordance with the UPF Installation and Operating Guidelines. Failure to do so can void the warranty. Every UPF Tank is inspected and tested before leaving our facility. Should your UPF Tank require service, please notify UPF via email, fax, in writing or by calling UPF at 1 -978- 975 -4520. Please provide the serial number, a de- scription of the service request, the location along with the phone number and name of the contact person. Our goal is to have scheduled work completed within a reasonable time period. Under a valid warranty claim, UPF will cover the cost to repair the UPF Tank including the customary and reasonable costs to make the tank accessible such as the removal and reinstallation of the tank if authorized in advance (pre- approved) by UPF. The warranty will not cover tanks that have been im- properly installed, operated,. misused, abused, or modified from its intended or designed use. Serial number must not have been altered, defaced or re- moved. Tanks that are not stored or installed properly which results in the tank suffering UV damage will not be covered by this agreement. Should UPF determine that the service claim is valid under this warranty for a tank located outside of the United States and Canada, UPF will assume the costs for labor and material for the warranty repair as described above plus all travel costs to the U.S. port of embarkation. Costs for airline travel outside of the U.S. and Canada will not be the responsibility of UPF. In the event the tank shall become stationed in an area of the world that is considered to be a war zone or where unsafe conditions exist for the safe passage of United States Nationals, as reported by the United States Depart- ment of State, (http: / /www.state.gov), and a request to perform service or warranty repairs, UPF reserves the right to refuse to honor such requests. It is the purchaser's responsibility to relocate the tank to an area where such repairs can be performed without undue risk to UPF employees or their des - ignee. UPF will make every reasonable effort to support our products though alternative means. For EllipseTm elliptical tanks, a separate five year warranty provided by the subcontractor is applied to the sub- frames, chute linings (rubber isolation strips) and metal components. The stainless steel wrap provided by UPF shall be warranted by the subcontractor performing the wrap installation in accordance with their warranty in place at the time of the installation. UPF will not be liable for any warranty costs associated with the wrap, sub- frames, chute linings (rubber isolation strips) and metal components but will assist with all claims on behalf of its customer. For PolySide® wetsided tanks and IntegratorTm Tank/Body units, all polypro- pylene components related to the tank shall carry the standard UPF lifetime Continued on back o Z L6 LU ad Z ®® , IL J' UM �w W rw IBM l� I� Z Uj O ® V? W Z POP- F IL 0 Z service warranty. Other polypropylene components, including but not limited to compartments, wheel wells, fenders and other body related components shall be warranted by UPF for a period of ten years. The warranty for the PolySide® and Integrator TM units excludes paint or hardware, which shall be covered by the manufacturer of the paint/hardware. All UPF tanks 50 gallons or less utilized for non -fire applications and installed on specialty vehicles such as ATVs, trailers, boats, etc. are covered under a separate warranty policy available from UPF. Further, UPF ProtectorTm foam and water trailers are warranted under a separate warranty policy available from UPF. This UPF warranty is transferable within the United States only with prior writ- ten approval by UPF (except an original apparatus manufacturer may assign this warranty to the first titled owner /lessee of the apparatus). UPF will NOT reimburse any unnecessary work and/or work that has not been pre- approved. Any and all third party charges must be pre - authorized and approved in writing by UPF prior to commencing the work. Any unauthorized third party repairs, alterations, actions or modi- fications will not be covered and can void the warranty. UPF will be the sole determining authority as to whether a service claim will be valid and covered under this warranty. In no event will UPF be liable for an amount in excess of the purchase price of the booster /foam tank at the time of manufacture or for any loss or dam- age, whether direct, indirect, incidental, consequential, or otherwise arising out of failure of its product. Loss of contents (water, foam, etc.) shall not be the responsibility of UPF. Further, UPF is not responsible for costs associated with service repairs to chassis, sub- frames, bodies, valves, dumps, hoses, pressure vacuum vents, and other components (i.e. liquid level transducers, etc.). Further, UPF will not cover the cost for travel of the vehicle to and from a repair facility. This warranty contains the entire warranty. It is the sole warranty and price agreements or representation, whether oral or written, are either merged herein or expressly cancelled. UPF neither assumes, nor authorizes any per- son supposing to act on its behalf to change, nor assume for it, any warranty or liability concerning its product. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow exclusion or limitation or incidental or consequential damage, so the above limitation or exclusion may not apply to you. Since some states do not allow limitations on the length of an implied warranty, the above limitation may not apply to you. THERE ARE NO WARRANTIES, EXPRESSED OR IMPLIED, WHICH EX- TEND BEYOND THE DESCRIPTION OF THE FACE HEREOF. THERE IS NO EXPRESS OR IMPLIED WARRANTY OF MERCHANTABILITY OR A WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. ADDITION- ALLY, THIS WARRANTY IS IN LIEU OF ALL OTHER OBLIGATION OR LIABILITIES ON THE PART OF UPF. POLY - TANK ®,& POLYSIDE® are registered trademarks of UPF, Inc. INTEGRATOR -, ELLIPSE' , ELLIP TTANK' & DEFENDER"" are trademarks of UPF, Inc. ® 08/01/09 UPF, Inc. Printed in the USA Fire and Rescue Apparatus One (1) Year Material and Workmanship Foam System &s Five (5) Year Material and Workmanship Control Bead Limited Warranty C LIMBED WARRANTY Subject to the limitations and exclusions set forth below, Pierce Manufacturing provides the following warranty to the Buyer. Coverage: ,Limited warranty 1 year parts and labor for for the foam - system and 5 years parts and labor for the control head. Warranty Begins: The date of the original purchase Invoice (issued when the product ships train the factory). Warranty Period One (1) Year & Five (5) Year Ends After: This warranty does not cover repair due to accidents, misuse, and excessive vibration, flying debris, storage damage (freezing), negligence or modification. This warranty is void if any modification or repairs are performed without Conditions and authorization. This also voids any future warranty. Exclusions: See Also This warranty does not cover cost of maintenance or repairs Paragraphs due to lack of required maintenance services as 2 thru 4 recommended. Performance of the required maintenance and use of proper fluids are the responsibility of the owner. This limited warranty shall apply only if the product is property maintained in accordance with Pierces maintenance instructions and manuals and Is used in service which is normal to the particular model. Normal service means service which does not subject me product to stresses or impacts greater than normally result from careful use. If the Buyer discovers a defect or nonconformity, it must notify Pierce In writing within thirty (30) days after the date of discovery, but In any event prior to the expiration of the warranty period. THIS LIMITED WARRANTY MAY NOT BE ASSIGNED OR OTHERWISE TRANSFERRED BY THE BUYER TO ANY SUBSEQUENT USER .OR..PURCHASER OR TO ANY OTHER PERSON OR ENTITY. , 1/30/2013 WA0231 Notwithstanding anything to the contrary herein, Pierce makes no warranty whatsoever as to: (a) any integral parts, components, attachments or bade accessories of or to the product that are not manufactured by Pierce, including but not limited to engines,: transmissions, drivelines,: axles. water pumps and generators; with re spect to all such parts, components, attachments and accessories, Pierce shag assign to Buyer the applicable warranties, if any, made by the respective manufacturers thereof; (b) any vehicle, chassis, or component, part, attachment or accessory damaged by misuse, . neglect, fire, exposure to severe environmental or chemical conditions, . acidic environment, improper maintenance, accident, crash, or force majeure such as natural disaster, lightning; earthquake, windstorm, flag, good; war or not; (c) any vehicle, chassis or component, part. attachment or accessory that has been repaired, altered or assembled in any way by any person or entity other than Pierce which, in the sole judgment of Pierce, adversely affects the performance, stability or purpose for which it was manufactured;. or (d) products or parts which may in the ordinary course wear out and have to be replaced during the warranty period, including, but not limited to, tires, fluids, gaskets and fight bulbs. Pierce assumes no responsibility for the assembly of its pans or subassemblies into finishing products or vehicles unless the assembly is performed by Pierce.. The original purchaser may void this warranty in part or in its entirely if the product is repaired or replaced (a) without prior written approval of the Pierce Customer Service Department; or (b) at a facility which has not been approved by Pierce as to technical capability. Any-repairs, modifications, .alterations or aftermarket pans added after manufacture without the authorization of Pierce may void this warranty. 2. DISCLAIMERS OF WARRANTIES THE WARRANTY SET FORTH IN PARAGRAPH 1 IS THE SOLE AND EXCLUSIVE WARRANTY GIVEN BY PIERCE. PIERCE HEREBY DISCLAIMS AND EXCLUDES ALL OTHER: WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY, ANY WARRANTNT .. A N Y OF F FITNESS FOR A PARTICULAR PURPOSE, AND ANY WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE. 3. BUYER'S EXCLUSIVE REMEDY, If the product fails to conform to the warranty set forth in paragraph 1 during the warranty period, and such nonconformity Is not due to misuse, neglecL accident or Improper maintenance, Buyer must notify, Pierce within the time period specified in paragraph 1, and shall make the product available for inspection by Pierce or its designated agent At the request of Pierce, any allegedly defective product shall be returned to Pierce by Buyer for examination and/or repair. Buyer shall be responsible for the cost of such transportation, and for risk of loss of or damage to the product during transportation. Within a reasonable tine. Pierce shall repair or replace (at Pierce's option and,expense) any nonconforming or defective parts. Repair or replacement shag be made only by a facility approved in advance in writing by Pierce. THIS REMEDY SHALL BE THE EXCLUSIVE AND SOLE REMEDY FOR ANY BREACH OF WARRANTY. 4. EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAGES, Notwithstanding anything to the contrary herein or in any agreement between Pierce and Buyer, IN NO EVENT SHALL PIERCE BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, SPECIAL, INDIRECT, OR PUNITIVE DAMAGES WHATSOEVER, WHETHER ARISING OUT OF BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR OTHER. THEORY OF LAW OR EQUITY, WITH RESPECT TO VEHICLES OR OTHER PRODUCTS SOLD BY PIERCE, OR THEIR OPERATION OR FAILURE TO OPERATE, OR ANY DEFECTS THEREIN, OR ANY UNDERTAKINGS, ACTS OR OMISSIONS RELATED THERETO, REGARDLESS OF WHETHER PIERCE HAS BEEN INFORMED OF THE POSSIBILITY OF ANY SUCH DAMAGES. Without limiting the generality of the foregoing; Pierce specifically disclaims any liability for property or personal injury damages„ penalties, damages for lost profits or revenues, loss of vehicles or products or any associated equipment, cost of substitute vehicles or products, down -time, delay damages, any other types of economic loss. or for any claims by any third party for any such damages. Note: Any Surety Bond, if a pen of the sale of the vehicle as to which this limited warranty is provided, applies only to this Pierce Basic One Year Limited Warranty for such vehicle, and not to other warranties made. by Pierce in a separate docinnent (if any) or to the warranties (if any) made by any manufacturer (other than Pierce) of any part component, attachment or accessory that Is incorporated into or attached to the vehicle. ..._._ ._ Fire and Rescue Apparatus Ten (10) Year Material and Workmanship Stainless Steel Piping Limited Warranty 1, LIMITED WARRANTY Subject to the limitations and exclusions set forth below, Pierce Manufacturing provides the following warranty to the Buyer. This 6rnited warranty shall apply only If the product is property maintained In accordance with Pierce's maintenance instructions and manuals and is used In service which Is normal to the particular model. Normal service means service which does not subject the product to stresses or Impacts greater than normally result from careful use. If the Buyer discovers a defect or nonconformity, it must notify Pierce in writing within thirty (30) days after the date of discovery, but in arty event prior to the expiration of the warranty period. THIS LIMITED WARRANTY MAY NOT BE ASSIGNED OR OTHERWISE TRANSFERRED BY THE BUYER TO ANY SUBSEQUENT USER OR PURCHASER OR TO ANY OTHER PERSON OR ENTITY. 3/22/2012 WA0035 Notwithstanding anything to the contrary herein, Pierce makes no warranty whatsoever as to: (a) any integral parts, components, attachments or trade accessories of or to the product that are not manufactured by Pierce, including but not limited to engines, transmissions, drivelines, axles. water pumps and generators; with respect to all such parts, components, attachments and accessories. Pierce shad assign to Buyer the applicable warranties, if any, made by the respective manufadurers thereof, (b) any vehicle, chassis, or component, part, attachment or accessory damaged by misuse, nogleCt fire, exposure to severe environmental or chemical conditions, acidic erwironm M. improper maintenance, accident, crash,. or force majeure such as natural disaster, lightning, earthquake, windstorm, hail, good, war or riot: (c) any vehicle, chassis or component, part, attachment or accessory that has been repaired, altered or assembled in any way by any person or entity other than Pierce which, in the sole judgment of Pierce, adversely affects the penormarxe,. stability or purpose for which d was manufactured; or (4) products or parts which may In the ordinary course wear out and have to be replaced during the warranty period, Inducting, but not funned to, tires, fluids, gaskets and light bulbs. Pierce assumes no responsibility for the assembly of its parts or subassemblies Into finishing products or vehicles unless the assembly Is performed by Pierce. The original purchaser may void this warranty in part or in its entirety If the product Is repaired or replaced (a) without prior written approval of the Pierce Customer Service Department; or (b) at a facility which has not been approved by Pierce as to technical capability. Any repairs, modifications, alterations oraftermarket parts added after manufacture without the authorization of Pierce may void this warranty. 2. DISCLAIMERS OF WARRANTIES THE WARRANTY SET FORTH IN PARAGRAPH 1.IS THESOLE AND EXCLUSIVE WARRANTY GIVEN BY PIERCE. PIERCE HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES, WHETHER EXPRESS,'IMPLIEOOR STATUTORY, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY, ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE,; AND ANY WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE. 3. BUYER'S EXCLUSIVE REMEDY. If the product falls to conform to the warranty act form in paragraph l during the warranty period, and such nonconformity Is not due to misuse, neglect, accident or improper maintenance, Buyer must notify Pierce within the time period specified in paragraph 1. and shad make the product erc available for inspection by Pie or Its designated. agent. At the request of Pierce, any allegedly defective . product anal be returned to Pierce by Buyerfor examination and /or repair. Buyer shall be responsible for the cost of such transportation, and for risk of loss of or damage to theproduct during transportattom Within reasonable time. Pierce shall repair or replace (at Plerce's option and expense) any nonconforming or defective parts. Repair or replacement shall be. made only by a facility approved In advance in writing by Pierce. THIS REMEDY SHALL BE THE EXCLUSIVE AND SOLE REMEDY FOR ANY BREACH OF WARRANTY. 4 EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAGES Notwithstanding anything to the contrary herein or in any agreement between Pierce and Buyer, IN NO EVENT SHALL PIERCE BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, SPECIAL,, INDIRECT, OR PUNITIVE DAMAGES WHATSOEVER, WHETHER ARISING OUT OF BREACH OF CONTRACT, WARRANTY,. TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR OTHER THEORY OF LAW OR EQUITY, WITH RESPECT TO VEHICLES OR. OTHER PRODUCTS SOLD BY PIERCE, OR THEIR OPERATION OR FAILURE TO OPERATE, OR ANY DEFECTS THEREIN, OR ANY UNDERTAKINGS. ACTS OR OMISSIONS RELATED THERETO, REGARDLESS OF WHETHER PIERCE HAS BEEN INFORMED OF THE POSSIBILITY OF ANY SUCH DAMAGES. Without limiting the generality of the foregoing; Pierce specifically disclaims any liability for property or personal Injury damages, penalties, damages for lost profits or revenues, loss of vehicles or products or any associated equipment, cost of substitute vehicles or products, down -time, delay damages, any ether types of economic loss, or for any claims by any third party for any such damages. Note: Any Surety Bond,. N a pan of the sale of the vehicle as to which this limited warranty is provided, applies o* to this Pierce Basic One Year Limited Warranty for such vehide, and not to other warranties made by Pierce in a separate document (if an)J or to the wamenh'es (if any) made by any manufacturer,(otlter than Pierce) of any part, component, attachment or accessory that is incorporated into or attached to Me vehicle. Stainless steel piping shall be free from structural failures caused by defects in material and workmanship, or Coverage: perforation caused by corrosion. The date of the original purchase invoice (issued when the Warranty Begins: product ships from the factory). Warranty Period Ten (10) Years - or - Ends After: 100,000 Miles Pierce's obligation under this warranty is limited to repairing or replacing without charge, as Pierce may elect, the Conditions and stainless steel piping or components which Pierce Exclusions: determines to have failed due to defective material and workmanship, or perforation caused by corrosion. See Also Paragraphs This warranty does not cover the use of fiuoroprotein (FP) Y thru 4 type foam. The sodium chloride within FP foam can cause long -term damage to system components if not thoroughly flushed Immediately after use. This 6rnited warranty shall apply only If the product is property maintained In accordance with Pierce's maintenance instructions and manuals and is used In service which Is normal to the particular model. Normal service means service which does not subject the product to stresses or Impacts greater than normally result from careful use. If the Buyer discovers a defect or nonconformity, it must notify Pierce in writing within thirty (30) days after the date of discovery, but in arty event prior to the expiration of the warranty period. THIS LIMITED WARRANTY MAY NOT BE ASSIGNED OR OTHERWISE TRANSFERRED BY THE BUYER TO ANY SUBSEQUENT USER OR PURCHASER OR TO ANY OTHER PERSON OR ENTITY. 3/22/2012 WA0035 Notwithstanding anything to the contrary herein, Pierce makes no warranty whatsoever as to: (a) any integral parts, components, attachments or trade accessories of or to the product that are not manufactured by Pierce, including but not limited to engines, transmissions, drivelines, axles. water pumps and generators; with respect to all such parts, components, attachments and accessories. Pierce shad assign to Buyer the applicable warranties, if any, made by the respective manufadurers thereof, (b) any vehicle, chassis, or component, part, attachment or accessory damaged by misuse, nogleCt fire, exposure to severe environmental or chemical conditions, acidic erwironm M. improper maintenance, accident, crash,. or force majeure such as natural disaster, lightning, earthquake, windstorm, hail, good, war or riot: (c) any vehicle, chassis or component, part, attachment or accessory that has been repaired, altered or assembled in any way by any person or entity other than Pierce which, in the sole judgment of Pierce, adversely affects the penormarxe,. stability or purpose for which d was manufactured; or (4) products or parts which may In the ordinary course wear out and have to be replaced during the warranty period, Inducting, but not funned to, tires, fluids, gaskets and light bulbs. Pierce assumes no responsibility for the assembly of its parts or subassemblies Into finishing products or vehicles unless the assembly Is performed by Pierce. The original purchaser may void this warranty in part or in its entirety If the product Is repaired or replaced (a) without prior written approval of the Pierce Customer Service Department; or (b) at a facility which has not been approved by Pierce as to technical capability. Any repairs, modifications, alterations oraftermarket parts added after manufacture without the authorization of Pierce may void this warranty. 2. DISCLAIMERS OF WARRANTIES THE WARRANTY SET FORTH IN PARAGRAPH 1.IS THESOLE AND EXCLUSIVE WARRANTY GIVEN BY PIERCE. PIERCE HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES, WHETHER EXPRESS,'IMPLIEOOR STATUTORY, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY, ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE,; AND ANY WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE. 3. BUYER'S EXCLUSIVE REMEDY. If the product falls to conform to the warranty act form in paragraph l during the warranty period, and such nonconformity Is not due to misuse, neglect, accident or improper maintenance, Buyer must notify Pierce within the time period specified in paragraph 1. and shad make the product erc available for inspection by Pie or Its designated. agent. At the request of Pierce, any allegedly defective . product anal be returned to Pierce by Buyerfor examination and /or repair. Buyer shall be responsible for the cost of such transportation, and for risk of loss of or damage to theproduct during transportattom Within reasonable time. Pierce shall repair or replace (at Plerce's option and expense) any nonconforming or defective parts. Repair or replacement shall be. made only by a facility approved In advance in writing by Pierce. THIS REMEDY SHALL BE THE EXCLUSIVE AND SOLE REMEDY FOR ANY BREACH OF WARRANTY. 4 EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAGES Notwithstanding anything to the contrary herein or in any agreement between Pierce and Buyer, IN NO EVENT SHALL PIERCE BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, SPECIAL,, INDIRECT, OR PUNITIVE DAMAGES WHATSOEVER, WHETHER ARISING OUT OF BREACH OF CONTRACT, WARRANTY,. TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR OTHER THEORY OF LAW OR EQUITY, WITH RESPECT TO VEHICLES OR. OTHER PRODUCTS SOLD BY PIERCE, OR THEIR OPERATION OR FAILURE TO OPERATE, OR ANY DEFECTS THEREIN, OR ANY UNDERTAKINGS. ACTS OR OMISSIONS RELATED THERETO, REGARDLESS OF WHETHER PIERCE HAS BEEN INFORMED OF THE POSSIBILITY OF ANY SUCH DAMAGES. Without limiting the generality of the foregoing; Pierce specifically disclaims any liability for property or personal Injury damages, penalties, damages for lost profits or revenues, loss of vehicles or products or any associated equipment, cost of substitute vehicles or products, down -time, delay damages, any ether types of economic loss, or for any claims by any third party for any such damages. Note: Any Surety Bond,. N a pan of the sale of the vehicle as to which this limited warranty is provided, applies o* to this Pierce Basic One Year Limited Warranty for such vehide, and not to other warranties made by Pierce in a separate document (if an)J or to the wamenh'es (if any) made by any manufacturer,(otlter than Pierce) of any part, component, attachment or accessory that is incorporated into or attached to Me vehicle. PIERCE MANUFACTURING INC AN OSHKOSH CORPORATION° COMPANY Certification Document CDO089 Statement of Compliance to NFPA 1901 -2009 Vehicle Stability Pierce fire apparatus comply with NFPA 1901 Section 4.13 Vehicle Stability using the tilt table method. As prescribed by the standard, each apparatus is compared to a substantially similar apparatus that has been loaded as required and tested on a tilt table per the SAE J2180 test procedure. If the apparatus configuration was not expected to meet the minimum tilt table criteria, then it will be equipped with the Electronic Stability Control option. A listing of all tested apparatus is maintained by the Research and Development lab and is available for inspection at the Appleton factory. VALIDATION TEST: Multiple Tests Pierce Manufacturing, Inc. Imo' f tY� Jon R. sd E -18228 n¢i g' arrulmx, . pw Vill A�arAt �� James Roger Lackore, PE November 18, 2010 4.13 Vehicle Stability 4.15:1" Rollover Stabilitv.'I'tte :ipp cants shall nh•ee the crite- ria dctltell io 4. 13.1.1. or it shall hr miniplwd with stabilim control sstcnt in armrdaoce with •1.13,1.2. 1.13:1.1 The apparatus shall meet the criteria defined in ei- ther of the• roll, -if g: (1)• "lIll. apparaun.shall remain stable to'26.5 degrees ill busll . directibtts when tested ono tilt table in acrcoictance with S\t:f21 b`n.:1lilt .ItnfH 'A" Thmhrdrl fro / lane f % /hirki. (2) The cak1113Eeel or ntexsured eviller of graaity (C:(:) shall Ix- na higher than 80 pemno of the reel axle track width. 4.13.1.1.1 C olopllmee• shall be certift•tl by testing, caleulu• ing, or mcasuring the apparatus or by comparing the appqu a- teu• ur a comidiaro. subsovuialy sintilar example apparauts, audthe• car, i {ir:itio:m shall hr dvlirernl with the lire ap{nhrants. 1.13.1.1.2 '11u• example apparatus shall. Ix• roosidcred mitt• stantiallv.sin ilar if ii includes a chassis smith the• manic or higher C1: height• tilt sauna or narrower rear axle track width. the sang• or greater water t:urk size told CG height. the same tau• of front and rear suspension, and the sauc type will size of aerial demise. 4.13.1.1.3 For pur{xsee oI 9.I;i.l.l. the ap{ —Rana shall lie loadnl widi fuel, frerftghdng agents, htne. tacklers. a weight of 250 Ib in each seating position. and weight equiaalent to theriut evllutcen>< egniprunn allow:mce as defined ill Lillie 12.1'1. {.13.1.1.3.1 11 the appacua, 6 designed .to covet a spccifitdl higher equipment loaliug or larger hose bed calmrity or to early a(i(letional ground ladders. these greater loads shall be inelurled -in tilt- arming, ealetdaning. or measuring. 4.15.1.1.3.2 The weight adderl to the lire apparmn for the purti(sc of test. calculation. or uutcurement shall be distritM used m approximate apical in setvireElse oft lie fire apt -;atn while nut excce(liog the mauuluc•atrers published .individual compartment weight ratings. 4.13.1.2 If the appa:aus is equipped Milt at stabilit, control ,),strm. else % ,oeni sh:dl have: at :r minimum. a steering wheel position: sensor. a vehicle raw sensor. a lateral accel romcter. and individual wheel brake cenuruls. CDO089 Vehicle Stability 101118.doc 1 1/2712011 Limited warranty on New Detroit Diesel >< DD13 Engines DETROFT Used In Fire Truck or Crash Vehicle Applications WESEL Terms of Coverage: uses This warranty applies to the first retail purchaser and subsequent own- ers during the WARRANTY PERIOD of new D013 Engines (referred to as Engine) manufactured by Detroit Diesel and/or supplied by Detroit Diesel or Detroit, Diesel of Canada Limited (which are collec- tively referred to as Detroit Diesel) for use in fire truck or crash vehicle applications. Defects This warranty covers Engine REPAIRS to correct any malfunction occurring during the WARRANTY PERIOD resulting from defects in material or workmanship. Repairs To obtain warranty repairs, you must request the needed repairs with- in the WARRANTY PERIOD from an authorized Detroit Diesel service outlet. Only new genuine parts„ remanufactured parts or components supplied or approved by Detroit Diesel will be used. Detroit Diesel may, at its discretion, replace rather than repair components. A reasonable time must be allowed to perform the warranty repair after taking the engine to the authorized service outlet Repairs will be performed dur- ing normal business hours. Warranty Period The WARRANTY PERIOD begins on the date the Engine is delivered to the first retail purchaser or put in use prior to sale at retail, whichev- er date occurs first, and ends at the time or mileagelkilometer limits shown below: WARRANTY PERIOD .Item. Warranty Limitations (whichever Occurs First) Repair Charge To Be Paid By Owner MONTHS -- MILESIKM PARTS LABOR Engine 0.60 0-104000 o-+so,000 In mn t No Charge No Charge Accessories' 0-24 0100,000 mi 6.164000 Ian No Charge No Charge ' Fir* Commander warranty Is two yearhmthnited mileage. Service Supplies The cost of service supplies such as coolant, oil and filters which are not reusable due to needed repairs is covered by this warranty. Like Replacement Engine Engine(s) supplied by Detroit Diesel as a replacement for an Engine still under warranty will assume the identity of the Engine being replaced and be entitled to the remaining warranty coverage. Engine Removal and Reinstallation Reasonable labor costs for engine removal and reinstallation, when necessary to make a warranty repair, are covered by this warranty. Towing During the base warranty period reasonable towing costs to the near- est authorized service outlet are covered by the warranty when due to warrantable failure and the engine is either inoperable, cannot be safely operated or continued operation would cause further damage to the Product. This Warranty Does Not Cover: Repairs Due To Accidents, Misuse, Alteration, Storage Damage, Negligence Or Certain Modifications Repairs due to an accident, misuse, alteration, misapplication, storage damage, negligence or modification exceeding Detroit Diesel specifications, are not covered by this warranty. Maintenance Detroit °Diesel is not responsible for the cost of maintenance or repairs due to lack of performance of required maintenance services or the failure to use fuel, oil, lubricants and coolant meeting Detroit Diesel- recommended specifications. Performance of the required mainte- nance and use of proper fuel, oil, lubricants and coolant are the responsibility of the owner. See the Engine Operator's Guide for full details. Incidental or Consequential Damages Detroit Diesel is not responsible for 'incidental or consequential costs or expenses which the owner may incur as a result of a malfunction or failure covered by this warranty, such as communication expenses, meals, lodging, overtime, loss of use of the Engine or vehicle ('down- time'), loss of time, inconvenience, cargo loss or damage, and other similar costs and expenses. Other Limitations The performance of REPAIRS is the exclusive Owner's remedy under this warranty. Detroit Diesel does not authorize any person to assume or create for it any other obligation or liability in connection with the Engine or the Accessories. THIS LIMITED WARRANTY AND THE EMISSIONS CONTROL WAR - RANTY ARE THE ONLY WARRANTIES APPLICABLE TO THE ENGINE AND ACCESSORIES AS USED IN FIRE TRUCK OR CRASH VEHICLE APPLICATIONS. DETROIT DIESEL MAKES NO OTHER WARRANTIES EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. DETROIT DIESEL SHALL NOT RE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES AS DESCRIBED ABOVE. Some states do not allow the limitation of how long this warranty may last or the limitation or exclusion of incidental or consequential dam- ages, so the above may not apply to you. This warranty gives you spe- cific legal rights, and you may also have other rights which may vary from state to state. DETROIT 0IE561. DEMAND 06tP6RMANC9- 13400 Outer Drive, West I Detroit, Michigan 48239.4001 Telephone: 313-592 -5000 www.detraitdiesel.com DDC- WAR - PAR -00I9 -0609 Specifications arc subject to change without notice. Detroit Dicscl Corporation is registered to lS09001:2001. Copyrights 2008, Detroit Diesel Corporation.. All rights reserved Detroit Diesel Corporation isa Daimler- company. AR Mi . . . . . . . . . . . SIMPLER IS BETTER Warranty coverage is essential to protecting your investment. But understanding the full details of your coverage can be challenging. This straighfforward approach allows you, our_ valued customer, to better understand how your specific vehicle applications will be covered. Advantage Program Purchasing additional coverage on select components will continue to safeguard your investment against major repair costs after the initial base coverage expires. You can find out more about the Advantage Program by visiting www.meritor.com or by contacting Meritor at 866- OnTracl (866- 668 - 1221). WARRANTY INFORMATION CONTENTS Effective Model Year 2014 Vehicles Lin eh a u l .............................................................................. ............................... 4 -5 GeneralService .................................................................... ............................... 6 -7 Heavy` Service ........................................................................ .............. .................. 8 -9 Off- Highway Service ................................................................. .............................10 Termsand Conditions ............................................................... .............................11 How to Read Warranty Coverage Number of Years Mileage (in thousands) P =Parts Only Unl= Unlimited P &L =Parts & Labor Notice: Models or components that are approved for use by Meritor's vocational guidelines contained in Meritor Publication TP -9441 for axles, SP -8320 for trailer axles, TP -12126 for drivelines, which are not specifically listed, are warranted for one year, unlimited miles, parts only (1 /Unl /P). Products purchased on an incomplete vehicle (glider) are limited to one year, unlimited miles parts only (1 /Unl /P). LINEHAUL WARRANTY INFORMATION Linehaul Vehicles • Auto Hauler ® flatbed • gulk Hauler ® General Freight • Chip Hauler (Truck)* ® Grain Hauler • Doubles ® Livestock Hauler ® Refrigerated Freight ® Moving Van ®Tanker ® Pipe Hauler ®Triples * Chip Hauler vehicles require specific axle models listed below and Linehaul condition to be eligible for Linehaul warranty consideration Linehaul Typically Is Coverage under Meritor's warranty requires that the application of products be • High mileage operation (over 60,000 miles /year) properly approved pursuant to OEM and Meritor approvals. Refer to TP -9441 for • Weil maintained major highways of concrete or axles, SP -8320 for trailer axles, TP -12126 fordrivelines, and/or contact Meritor asphalt construction regarding specific application approval questions on any product line. • Greater than 30 miles between starting and stopping Front Non -Drive Steer Axles — 5/7501P &L FD -965 FF -944 FG -941 MFS- 10- 144A -N MFS- 13- 143A -N FF -941 FF -961 FG -943 MFS- 12- 143A -N MFS- 13- 144A -N FF -942 FF -966 MFS- 10 -122A MFS- I2- 144A -N MFS- 14- 143A -N FF -943 FF -961 MFS- 10- 143A -N MFS - 125- 143A -N Rear Drive Single Axles — 5/750/P &L RS- 19- 144/145/A RS -21 -160 RS -23 -161 MS- 19 -14X RH -23 -160 RS -23 -186 MS- 21- 144MA -N RS -23 -1'60 RS -21 -145 RH -23 -161 Drivelines RPL MXL 155N. 92N Rear Drive Tandem/Tridern Axles 51750 /P &L RT- 34- 144 /P /A MA -40 -165 MT -40 -943 RT40- 1451P/A MT- 34 -14X /P RZ -1662 RT- 40- 160 /P'•2 MT- 40 -14X /P RZ -188 RT- 46- 160 /P'•2 MT- 40 -14X/P RT- 46- 164EH /P',2 MT - -40 -143 RT -50460 /1'" MT40 -144/P ' These models required. for Chip Hauler and Linehaul warranty consideration. 4 1400 /P, 1 /Unl /P &L 2 Each vehicle must have a Request for Application Recommendation (RAR) 3/350/P, 1 /Unl /P &L approved by Meritor prior to vehicle build. All RARs must identifythe chassis 1 /Unl /P number or VIN. Refer to Product Information Letter #303 and #396 for 1 1Unl/P further details. Brake Components Cam Q Series Trailer Brakes 5/500/P, 1/100/1. LX500 Feature' 5/750/P &L Cam Q PIusTM 5 /500 /P,1 /Unl /P &L ASA 5/5001P, 1 /Unl /P &L Hubs /Cast Drums and Other Wheel -end Components 1/Unl /P Hydraulic Disc Brakes 1/Unl/P All Other Brakes 1 /Unl /P X30Tm Drums' 12 -Years or Wearable Life /P EX Air Disc Brake 5/500/P, 1 /Unl /L ' Includes: bushing, seal, cam, ASA lubrication and wear coverage of 3/500/P &L. 5/500/P,1/10O/L 'Based on stamped wear diameter max. 1 /100 /P&L Trailer Axles Beam and Brackets 5/5001P, 1/100/L Wheel.End Systems' Standard System' 1 /100 /P &L PreSet:by Meritor' 5 /500/P &L AxlePak41 4P /3L Beam and Brackets 5/500/P, 1 /100 /L AxlePak65 6P /5L Beam and Brackets 6/600/P, 1 /100 /L ' Includes hub, wheel seals and wheel bearings —all systems require annual inspections and proper documentation to ensure full coverage. ' When installed by Mentor. ' Requires approved hubcap stating PreSet by Meritor on hubcap face. ° Applies to STEMCO Guardian HP Seal, STEMCO Pro -Torq nut, STEMCO Integrated Sentinel Hub Cap, and Meritor bearings. 5 Applies to STEMCO Guardian HP Seal, STEMCOPro -Torq nut, STEMCO Integrated Sentinel Hub Cap, and STEMCO matched bearing sets. (For brake components and ABS coverage, refer to appropriate product warranties.) TAG/Pusher Axles' TO, TOO, TR, TRD Beam and Brackets 5 /150 /P &L ' For brake components and ABS Coverage, refer to appropriate product warranties. Meritor Tire Inflation System by PSI MTIS Components 3/500/P &L Trailer Air Suspension Systems MPA313/40 (Tandem Axle Parallelogram)' Major Structural Components 5/500/P, 1/100/1. Height Control Valve 1 /100 /P &L Shock Absorbers 2/200/P &.L Air Springs 2/20O/P,1 /100 /1. Bushings 7/Unl /P, 5 /Unl /L PinLoc Air Controls 1 /100/P &L PinLoc Actuator 3/300/P &L MPA20 (Single Axle Parallelogram) Major Structural Components 5/500/P,1/10O/L Height Control Valve 1 /100 /P&L Shock Absorbers 2 /200 /P &L Air Springs 2/200/P, 1/100/L Bushings 7 /Unl /P, 5 /Unl /L MTA (Trailing Arm) Major Structural Components 5/500/P, 1 /100 /L Height Control Valve 1 /100 /P &L Shock Absorbers 2 %200 /P &L Air Springs & Rebound Straps 2/2001P, 1 /100 1L Bushings 5/50O/P,3/300/1. Fastener torque coverage is limited to 2Nnl P &L when torqued by Meritor (For axle and ABS coverage, refer to appropriate product warranties.) a GENERAL SERVICE WARRANTY INFORMATION General Service Vehicles • Aerial Ladder Truck • Aerial Platform • Ambulance • Auto Hauler • Beverage Truck • Chip Hauler • Cross Country Coach • Flatbed • Front Engine Commercial Chassis ®Front Engine Integral Coach • General Freight • Intercity Coach •intermodal Chassis • Livestock Hauler • Meat Packer • Moving Van ®Municipal Truck • Newspaper Delivery ®Pick -Up and Delivery • Pipe Hauler • Platform Auto Hauler ®Pumper ®Rear Engine Integral Coach ®Recreational Vehicles ®Refrigerated Freight • School Bus • Stake Truck • Tanker • Tanker Truck ®Tour Bus • Wrecker General Service Typically Is Coverage under Meritor's warranty requires that the application of products be • Lower mileage operations (less than 60,000 miles /year) properly approved pursuant to OEM and Meritor approvals. Refer to TP -9441 for • Generally, on -road service (less than 10% off -road) axles, SP -8320 for trailer axles, TP -12126 for drivellnes, and/or contact Meritor • An average of three (3) miles between starting and stopping regarding specific application approval questions on any product line. Front Drive/Non -Drive Steer Axles 2 /UnVP &L FD -965 FF -967 MFS -6- 1628 -N MFS- 8- 153B -N MFS- 13- 122A -N FF -941 FG -941 MFS- 6- 153C -N MFS- 8- 163B -N MFS- 13- 143A -N FF -942 FH -941 MFS- 6- 162C -N MFS- 10 -122A MFS- 13- 144A -N FF -943 FH -9461 MFS- 7- 113C -N MFS- 10- 143A -N MFS- 14- 143A -N FF -944 FL -941 MFS- 7- 153C -N MFS- 10- 144A -N MFS- 16- 122A -N FF -946 FL -943 MFS- 7.163C -N MFS- 12- 143A -N MFS- 16- 143A -N FF -961 MFS- 6- 151A -N MFS -8- 1136 -N MFS- 12- 144A -N MFS- 18- 133A -N FF -966 MFS -6- 1538 -N MFS- 8- 143A -N MFS - 125- 143A -N MFS- 20- 133A -N ' Can also be used with reduced steer angles in tag position in Coach Applications. Rear Drive Single Axles — 2/UnVP&L Rear Drive Tandem — 3/UnVP &L MS -10 -113 RS- 19- 144/145/A RC -23 -160 RS -23 -161 RS -30 -185 RT -40. 160 /P RT- 46- 164EH /P MS -11 -113 MS- 21 -14X RC -23 -161 RS -23 -161 MS-30 -616 RT -46 -160 /P RT- 50 -160/P MS42 -113 MS- 21- 144MA -N RC -23 -162' RS -23 -186 RS -35 -380 MS- 17 -14X RS -21 -145 RC -23 -165' RS -24 -160 71162 Drivelines MS- 19 -14X RS- 21 -145/A RH -23 -160 RC -25 -160 71163 RS -13 -120 RS -21 -160 RH -23 -161 RS -25 -160 79163 RPL 4 /400/P,1/Unl /P &L RS -15 -120 RC -22 -145 RS -23 -160 RS -26 -185 MXL 3 /350 1P,1 /Unl/P &L RS- 17- 144/145/A RC -22 -145 /A RS -23 -160 MS -26 -616 155N 1 /Unl/P ' 3 /Unl /P &L if Preset by Meritor. 92N 1 /Unl /P Rear Drive Tandem/Tridem Axles — 2/Unl/P &L MT- 34 -14X/P MT- 40 -144/P MT -52 -616 RZ -166 RT- 34- 1441P/A RT- 40- 145/P/A RT -52 -185' RZ -188 MT- 40 -14X/P MT- 44 -14X/P MT -58 -616 MT- 40- 143DA -N RT- 44 -145/P RT -58 -1851 MT- 40- 143MA -N' RT -46 -169 MT -70 -380 Axle model designated will vary according to options and variations specified on these axles. Contact Meritor Azle Applications Engineering for details. ' Each vehicle must have a Request forApplication Recommendation (RAR) approved by Meritor prior to vehicle build. All RARs must identify the chassis number or VIN. Refer to Product Information Letter #303 and #396 for further details. Brake Components Cam Q Series Trailer Brakes 3 /Unl /P, 1 /Unl /L LX500 Feature' 3 /Unl /P &L Cam P3 2 /200 /P Cam 3 /Unl/P Cam Q PIusM 3 /Unl /P &L Cam .Q Plus T°' 2 /200/P &L ASA 3 /Unt /P ASA' 2/200/P Hubs /Cast Drums and Other Wheel -end Components 1 /Unl /P Hydraulic Disc Brakes 1 /Unl /P All Other Brakes 1 /Unl /P X30Th1 Drums' 12 -Years or Wearable Life/P EXAir Disc Brake 2/Unl /P &L ' Includes: bushing, seal, cam, ASA lubrication and wear coverage of 1 /Unl/P. Based on stamped wear diameter max. MTA (Trailing Arm) ' Applies to Tour Bus and Cross Country Coach only. Major Structural Components Trailer Axles Beam and Brackets' 5/5001P, 1 /100 /1- Wheel End Systems' 5 /Unl /P, 1 /Unl /L Standard System' 1 /Unl /P &L Az1ePak4' 4P /3L Beam and Brackets 5/500/P, 1/100/1. AxlePak65 6P /5L Beam and Brackets 6 /600/P, 1 /100 /1. ' 9000 Series is 3/Unl/P,1 /Unl/L ' Includes hub, wheel seals and wheel bearings —all systems require annual inspections and proper documentation to ensure full coverage. When installed by Mentor ' Applies #o STEMCO Guardian HP Seal, STEMCO Pro -Torq nut, STEMCO Integrated Sentinel Hub Cap, and Meritor bearings. $.Applies to STEMCO Guardian HP Seal, STEMCO.Pro -Torq nut, STEMCO Integrated Sentinel Hub Cap, and STEMCO matched bearing sets. (For brake components and ABS coverage, refer to appropriate product warranties.) Chassis Axles (2000 Series /ChassiPak) Beam & Brackets 6 /Unl /P, 1 /Unt /L Wheel End Systems' Standard System 1 /Unl /P &L AxiePaW 4P /3L Beam and Brackets 7P /1L AxlePak6' 6P /5L Beam and Brackets 7P /1L '',Includes hub, wheel seals and wheel bearings —all systems require annual inspections and,proper documentation to ensure full coverage. ' Applies to STEMCO Guardian HP Seal, STEMCO Pro -Torq nut, STEMCO Integrated Sentinel Hub Cap, and Meritor bearings. 'Applies to STEMCO Guardian HP Seal, STEMCO Pro -Torq nut, STEMCO Integrated Sentinel Hub Cap, and STEMCO matched bearing sets. Trailer Air Suspension Systems MPA38 /40 (Tandem Axle Parallelogram)' Major Structural Components 5 /Unl /P, 1 /Unl /L Height Control Valve 1 /Unl /P &L Shock Absorbers 2/Unl /P &L Air Springs 2 /Unl/P, I /Unl /L Bushings 7 /Unl/P, 5 /Unl /L Air Controls 1 /100 /P &L Air Actuator 3 /300 /P &L MPA20 (Single Axle Parallelogram) Major Structural Components 5 /Unl /P,1 /Unl /L Height Control Valve 1 /,Unl /P &L Shock Absorbers 2/Unl /P &L Air Springs 2 /Unl/P, 1 /Unl /L Bushings 7 /Uni/P, 5 /Unl /L MTA (Trailing Arm) Major Structural Components 5/Unl /P, I /Unl /L Height Control Valve 1 /Unl /P &L Shock Absorbers 2 /Uni /P &L Air Springs and Rebound Straps 2 /Unl /P,1 /Unl /L Bushings' 5/Unl/P, 3 /Unl /L (For axle and ABS coverage, refer to appropriate product warranties.) ' Fastener torque coverage is limited to 2/UnI P &L when torqued by Meritor 7 Raw wood applications 3 /Unl /P, 1 /Unl/L TAG/Pusher Axles TQ, TQD, TR, TRD Beam and Brackets' 3/Unl/P, 1 /Unl /L MC12002, MC14002, MC16003, FH946 2/Unl /P &L (For brake components and ABS coverage, refer to appropriate product warranties.) ' 3 /UNL/P &L if sold with Preset by Meritor. Meritor® Tire Inflation System by PSI MTIS Components 3 /500 1P &L HEAVY SERVICE WARRANTY INFORMATION Heavy Service Vehicles • Airport Rescue Fire (ARF) • Airport Shuttle • Asphalt Truck • Block Truck • Bottom Dump Trailer Combination • Cementing Vehicle • City Bus • Commercial Pick -Up • Concrete Pumper ®Construction Material Hauler ®Crash Fire Rescue (CFR) ®Mixer • Demolition Heavy Service Typically Is • Drill Rig • Dump • Emergency Service • Equipment Hauling • Flatbed Trailer Hauler • Flatbed Truck • Fracturing Truck • Front. Loader • Geophysical Exploration • Hopper Trailer Combinations • Landscaping Truck . ®Liquid Waste Hauler • Log Hauling • Lowboy ® Michigan Special Gravel Trains .® Michigan Special Log Hauler • Michigan Special Steel Hauler • Michigan Special Waste Vehicle • Municipal Dump • Rapid Intervention Vehicle (RIV) • Rear Loader • Recycling Truck • Residential Pick -Up • Rigging Truck • Roll -Off ®Scrap Truck • Semi -End Dump • Sewer /Septic Vacuum • Shuttle Bus • Side Loader • Snowplow /Snowblower • Steel Hauling • Tanker • Tank Truck • Tractors with Pole Trailers • Tractor/Trailerwith Jeeps • Transfer Dump ®Transfer Vehicle • Transit Bus ®'Trot ley • Utility Truck •Winch Truck • Moderate mileage operation (less than 60,000 miles per year) . Coverage under Meritor's warranty requires that the application of prod - • On /Off road vocations (10% or more off -road) ucts be properly approved pursuant to OEM and Meritor approvals. Refer to • Moderate to frequent stops /starts (up to 10 stops per mile) TP -9441 for axles, SP -8320 for trailer axles, TP -12126 for drivelines, and/ or contact Meritor regarding specific application approval questions on any product line. Front Drive/Non -Drive Steer Axles — 2/UnVP &L FD -965 FG -941 MFS- 6 -162C MFS- 10- 144A -N MFS- 16- 143A -N MX -18 -120 FF -941 FG -943 MFS- 7- 113C -N MFS- 12- 143A -N MFS- 18- 133A -N MX -17 -140 FF -942 FH -941 MFS- 7- 153C -N MFS- 12- 144A -N MFS- 20- 133A -N MX -19 -140 FF -943 FH -946 MFS- 7- 163C -N MFS -12 -155 RF -16 -145 MX -21 -140 FF -944 FL -941 MFS4- 113B -N MFS- 13- 143A -N RF -21 -160 MX -21 -160 FF -946 FL -943 MFS- 8- I53B -N MFS- 13- 144A -N MX -10 -120 MX -23 -160 FF -.961 MFS- 6- 151A -N MFS- 8- 163B -N MFS -13 -155 MX -12 -120 MX -23 -810 FF -966 MFS- 6 -153B MFS- 10 -122A MFS- 14- 143A -N MX44 -120 FF -967 MFS -6 -1628 MFS- 10- 143A -N MFS- 16- 122A -N MX -16 -120 Drivelines — 1/UnVP &L RPL 92N RN MXL Rear Drive Single Axles — 2/Unl /P &L MS -10 -113 RC -23 -160 MS -26 -616 RS -13 -120 RH -23 -160 RS- 26- 185/380 RS -15 -120 RS -23 -160 MS-30 -616 MS- 17 -14X RS -23 -160 RH -30 -185 RS- 17- 144/145/A RC -23 -161 RS- 30- 185/380 MS- 19 -14X RH -23 -161 MS -35 -380 RS -19 -144 RS -23 -161 RS -38 -380 MS -21 -114 RS- 23- 186/380 RC -25 -160 MS- 21 -14X RC -23 -162 RC -26 -633 RS -21 -145 RC -23 -165 MT -58 -616 RS- 21 -145/A RS-24 -160 71162 RS -21 -160 RS -25 -160 71163 RC -22 -145 RH -26 -185 79163 Rear Drive Tandem/Tridem Axles — 2/UnVP &L MT- 34 -14X/P MT -40 -144 RT -46 -169 RT -70 -3805 RT- 34- 144/P/A MT- 40 -144/P MT -52 -616 MT -70 -3805 MT- 40 -14X/P RT -40- 145 /P /A RT- 52- 185/380?a,1s RZ -1665 MT- 40- 143DA -N MT- 44 -14X/P MT-58 -616 RZ -1885 MT- 40- 143MA -N' RT 44 -145/P RT- 58= 185/3801,3,1. 1 /Unl/P ' U,S. only. Canadian warranty = 1/Unl /P for combination vehicles only. P Axle model,designated will vary according to options and variations specified on these axles.. Contact Meritor Axle Applications. Engineering for details. 3 Azle: model': designated will vary according to options and variations specified on these axles. Contact Meritor Axle Applications Engineering for details. ' Each vehicle must have a Request for Application Recommendation (RAR) approved by Mentor prior to vehicle build. All RARs must identifythe chassis number or VIN. Refer to Product 11 Letter #303 and 096 for further details. 5 Warranty is 1/Unl/P &L when used with 2050 Ib.ft. engines.Refer to Product Information Letter #293 for further details. Brake Components Cam P 3/Unl /P Cam P3 2/1 ON Cam Cast PIUSTM 2/100 /P &L Cam Q,PIusTM 3 /Unl /P &L Cam Q PIUSTMI 2/100/P &L ASA 3 /UnIN ASA' 211 DON Hubs /Cast Drums and Other Wheel -end Components 1 /Unl/P Hydraulic Disc Brakes 1 /Unl/P All Other Brakes 1/Unl/P X30TA° Drums' 12 -Years or Wearable Life/P EX Air Disc Brake 2/100 /P &L ' Based on stamped wear diameter max. 1 Applies to City Bus, Trolley, Shuttle Bus and Airport Shuttle only. ' Warranty for all non - Meritor ASAs supplied by Meritor for all Heavy Service vocations is 1 /100/P. Transfer Cases — 1 /UnI /P MTC -4208 MTC -4213 T -2119 MTC -4240 T -2111 T -2120 Rear Drive Tandem — 3 /Unl /P &L RT- 40- 160 /P /A' RT- 46- 160 /P /A',' RT- 46- 164EH/P /A2•' RT- 50- 160 /P /A' ' U.S. only. Canadian warranty = l /UnI /P for combination. vehicles only. t Axle model designated will vary according to options and variations specified on these axles. Contact Meritor Axle Applications Engineering for details. 3 Each vehicle must have a Request for Application Recommendation (RAR) approved by Meritor prior to vehicle build. All RARs must identify the chassis number or VIN. Refer to Product Information Letter #303 and #396 for further details. Meritor Tire Inflation System by PSI MTIS Components 3/5001P &L Trailer Air Suspension Systems MTA (Trailing Arm) Major. Structural Components' 5 /Unl/P,1/Unl /L Height Control Valve lftlftL Shock Absorbers 2/Unl /P &L Air Springs 2 /UnI /P,1 /UnI /L Bushings' 5 /UnI /P, 3 /Un)/L ' Raw wood applications 3 /UnUP, 1Nnl1L (For axle and ABS coverage, refer to appropriate product warranties.) Center Non -drive Axles — 2/UnVP &L MC26000 71063 79063 Trailer Axles Beam and Brackets' 5 /UnI /P,1 /UnI /L Wheel End Systemsz Standard System' 1/Unl/P &L . 19000 Series is 3/Unl/P,1 /UnVL. r Includes hub, wheel seals and wheel bearings —all systems require annual inspections and proper documentation to ensure full coverage. 3 When installed by Meritor. (For brake components and ABS coverage, refer to appropriate product warranties. OFF - HIGHWAY SERVICE WARRANTY INFORMATION Industrial And Off - Highway Service Vehicles ® Load- On/Load -Off ® Yard Jockey ® Specialized Mining ® Rail Car Mover IN Port Tractor ® All-Terrain Crane ® Excavator ® Loader ® Rail Yard Spotter ® Rough Terrain Crane ® Compactor 11 Tow Tractor ®Roll -On /Roll -Off ® Forestry ® Fertilizer Spreader ® Pushback Tractor ® Stevedoring Tractor ® Material Handling ® Snow Blower ® Trailer Spotter ® Specialized Heavy Haul ® Mining Industrial And Off- Highway Service Typically Is • Low mileage operation Coverage under Meritor's warranty requires that the application of products be • Low speed vehicle speed restriction properly approved pursuant to OEM and Mentor approvals. Refer to TP -9441 for • Vehicles are not typically licensed for highway use axles, TP -12126 fordrivelines, and/or contact Meritor regarding specific application ®'Six (6) starts /stops per mile (typical) approval questions on any product line. Drive Steer Axles — 1 /Unl/P MOR MOX Moe Front Non -Drive Steer Axles —1 /UnUP FF - 941 FL - 943 MFS- 16- 143A -N FF - 943 MFS- 12- 143A -N MFS- 18- 133A -N FF- 961 MFS- 12- 144A -N MFS- 20- 133A -N FF - 966 MFS- 13- 143A -N MON -ZO FAMILY FG - 941 MFS- 13- 144A -N FG -943 MFS- 14- 143A -N FL -.941 MFS- 16- 122A -N Planetary Axles — 1/UnVP MOR MOX Moe MOT Rear Drive Single Axles — 1 1UnUP RS -23 -186 MS -30 -616 MS -35 -380 RS -23 -380 RS -30 -185 RS -24 -160 RS -30 -380 10 Drivelines — 1/UnUP RPL RN MXL Rear Drive Tandem Axles — 2 /UnUP MT- 44 -14X/P MT -70 -380 RT- 46- 164EWP MT -52 -616 RT- 44 -145/P RT -50 -180 /P MT -58 -616 RT- 46 -160/P RZ -166 Brake Components Cam P 3 /Unl /P Cam Q PlusTm 3 1Unl 1P &L ASA 3 /UnI/P Hubs /Cast Drums and Other Wheel -end Components 1 /Unl/P Hydraulic Disc Brakes 1 /Unl/P All Other Brakes 1 /Unl/P TERMS AND CONDITIONS Coverage Exclusions Product Description All The cost of any repairs, replacements or adjustments to a covered component (1) associated with noise; (2) resulting from the use or installation of non - genuine Meritor components or materials; (3) due to vibration associated with improper operation or misapplication of drivetrain components; and (4) damage resulting from corrosion. Front Axles King Pin Bushings. Rear Axles Self- contained traction equalizers and oil filters. The use of NoSPIN differentials will result in the exclusion of axle shafts from warranty considerations. NoSPIN is a product of Eaton. ASA. Boot and bushing. Bent, broken, over - torqued, missing or otherwise damaged pawl assemblies. Cam Brake Brake lining wear and brake shoe "rust- jacking." Disc Brake Pad wear, rotor wear. Coverage Limitations Product Description All Any claim beyond 60 days from date of repair will not be accepted or honored under this warranty program. Products purchased on an incomplete vehicle (glider) are limited to one year, unlimited miles parts only (1 /Unl /P). Front Axles Tie rod and tie rod ends limited'to 3- year /300;000 -mile or published vocational coverage, whichever is less. Wheel seals, gaskets and wheel bearings are covered for 1 year /unlimited miles if the wheel end equipment is supplied and assembled by Meritor. Rear Axles Pinion and through shaft seals limited to 3-year/300,000-mile or published vocational coverage, whichever is less, if yoke is installed by Meritor. If yoke is not installed by Meritor, then Meritor does not warrant pinion seals. Wheel seals, gaskets and wheel bearings are covered for 1 year /unlimited miles if the wheel end equipment is supplied and assembled by Meritor. Rear Axles The Meritor® breather part number A- 2291 -C -8765 with A- 3196-1-1336 hose must be used for eligibility of any potential warranty consideration relating to contamination and /or loss of lube in axles. Cam Brake Limited to bracket, brake spider and camshaft structural integrity. X30 Wearable life is up to the discard diameter of the drum. Disc Brake Warranty coverage for boots, seals, bushings and pins is 2/200/P. Warranty coverage for pads is 1 /100 /P. Warranty coverage on vehicles with 1,850 lb-ft engine torque and over may be reduced on individual drivetrain components. Contact your Meritor representative for specific details. 11 TERMS AND CONDITIONS (1) What is Covered by this Commercial Warranty? .Meritor Inc. warrants to the owner ( "Owner ") that the components listed in this publication, which have been installed by an Original Equipment Manufacturer ( "OEM ") as original equipment in vehicles licensed for on- highway use, will be free from defects in material and Workmanship. This warranty coverage begins only after the expiration of the OEM's vehicle warranty for the applicable covered components. Warranty coverage ends at the expiration of the applicable time period from the date of vehicle purchase by the first Owner, or, the applicable mileage limitation, whichever occurs first. Duration of coverage varies by component and vocation as detailed elsewhere in this warranty statement. Some components are warranted for parts only and the Owner must pay any labor costs associated with the repair or replacement of the component. Other components are warranted for both parts and reasonable labor to repair or replace the subject component. Components (whether new, used or remanufactured) installed as re- placements under this warranty are warranted only for the remainder of the original period of time or mileage under the original warranty. For certain components, coverage requires the use of specific extended drain interval or synthetic lubricants. For further information about Lubrication and maintenance, see Meritor publication Maintenance Manual Number I and the applicable Meritor maintenance manual for the product in question. Other conditions and limitations applicable to this warranty are detailed below. (2) Designation of Vocational Use Required. To obtain warranty coverage, each Owner must notify Meritor through the OEM new truck and /or trailer dealer of the intended vocational use of the vehicle into which the Meritor components have been incorporated prior to the vehicle in- service date. This notification may be accomplished by registering the vehicle through your OEM new truck and/or trailer dealer or with Meritor directly. Failure to notify Meritor of (1) the intended vocational use of the vehicle or (11) a change in vocational use from that which was originally designated, will result in the application of a one year, unlimited mileage, parts only warranty (1 /Unl /P) from the initial in- service date. A second Owner and each subsequent Owner must also notify Meritor as to the intended vocational use of the vehicle. This notification can be sent directly to Meritor or through the OEM new truck and /or trailer dealer. The duration and mileage coverage of this warranty cannot exceed the coverage extended to the first Owner after his or her initial designation of vocational use. Coverage under Meritor's warranty requires that the application of products be property approved pursuant to OEM and Meritor approvals. Refer to TP -9441 for axles, SP -8320 for trailer axles, TP -12126 for drivelines,.and /or contact Meritor regarding specific application approval questions on any product line. (3) What is the Cost of this Warranty? There is no charge to the Owner for this warranty. (4) What is not Covered by this Warranty? This warranty does not cover normal wear and tear; nor does it cover a component that fails, malfunctions or is damaged as a result of (1) improper installation, adjustment, repair or modification (including the use of`unauthorized attachments or changes or modification in the vehicle's configuration, usage, or vocation from that which was originally approved by Meritor), (11) accident, natural disaster, abuse, or improper use (including loading beyond the specified maximum vehicle weight or altering engine power settings to exceed the axle and /or driveline capacity), or (111) improper or insufficient maintenance (including deviation from approved lubricants, change intervals, or tube levels). This warranty does not cover any component or part that is not sold by Meritor. for vehicles that operate full or part time outside of the United States and Canada, a one year, unlimited mileage, parts only warranty (1 /Unl /P) will apply. (5) Remedy. The exclusive remedy under this warranty shall be the repair or replacement of the defective component at Meritor's option., Meritor reserves the right to require that all applicable failed materials are available and /or returned to Meritor for review and evaluation. (6) Disclaimer of Warranty. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES OR CONDtfIONS, EXPRESSED; IMPLIED OR STATUTORY INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE. (7) Limitation of Remedies. In no event shall Meritor be liable for special, incidental, indirect, or consequential damages of any kind or under any legal theory, including, but not limited to, towing, downtime, lost productivity, cargo damage, taxes, or any other losses or costs resulting from a defective covered component. (8) To Obtain Service. If the Owner discovers within the applicable coverage period a defect in material or workmanship, the Owner must promptly give notice to either Meritor or the dealer from which the vehicle was purchased. To obtain service, the vehicle must be taken to any participating OEM new truck and/or trailer dealer or authorized Meritor service location. The dealer will inspect the vehicle and contact Meritor for an evalu- ation of the claim. When authorized by Meritor, the dealer will repair or replace during the term of this warranty any defective Meritor component covered by this warranty. (9) Entire Agreement. This is the entire agreement between Meritor and the Owner about warranty and no Meritor employee or dealer is authorized to make any additional warranty on behalf of Meritor. This agreement allocates the responsibilities for component failure between Meritor and the Owner. Vehicle models. brands and names depicted herein are the property of then respective owners, and are not in any way associated with Meritor. Inc. or its affiliates. MERITOR Meritor Heavy Vehicle Systems, LLC For more information: 02013 Meritor.anc. 2135 West Maple Road call Ontrac at 866 -668 -7221 Litho in USA, SP -95155 Troy, Michigan 48084 USA or visit meritor.com Revised 10.13 (47865/11900) MER'ITOR`. C Effective Model Year 2013 Vehicles Linehaul ........................................................................... ..................I............ 4 -5 GeneralService .................................................................... ............................... 6 -7 HeavyService ...._ ................................................................. ............................... 8 -9 Off- Highway Service ................................................................ .............................10 Termsand Conditions .............................................................. .............................11 How to Read Warranty Coverage Number of Years Mileage (in thousands) P= Parts Only Unl= Unlimited I P &L =Parts & Labor Models or components that are approved for use by Meritor's vocational guidelines contained in Meritor Publication TP -9441 for axles, SP-8320 for trailer axles, which are not specifically listed, are warranted for one year, unlimited miles, parts only (1 /Unl /P). 3 HEAVY SERVICE VEHICLES ................. ................................................................................................................ ............................... • Airport Rescue fire (ARF) • Airport Shuttle • Asphalt Truck • Block Truck • Bottom Dump Trailer Combination • Cementing Vehicle • City Bus • Commercial Pick -Up • Concrete Pumper • Construction Material Hauler • Crash Fire Rescue (CFR) • Mixer • Demolition • Drill Rig • Dump • Emergency Service • Equipment Hauling • Flatbed Trailer Hauler • Flatbed Truck • Fracturing Truck • Front Loader • Geophysical Exploration • Hopper Trailer Combinations • Landscaping Truck • Liquid Waste Hauler • Log Hauling • Lowboy • Michigan Special Gravel Trains • Michigan Special Log Hauler HEAVY SERVICE TYPICALLY IS • Michigan Special Steel Hauler • Michigan Special Waste Vehicle • Municipal Dump • Rapid Intervention Vehicle (RIV) • Rear Loader • Recycling` Truck • Residential Pick -Up • Rigging Truck • Roll -Off • Scrap Truck • Semi-End Dump • Sewer /Septic Vacuum. • Shuttle Bus • Side Loader • Snowplow /Snowblower • Steel Hauling • Tanker • Tank Truck • Tractors with Pole. Trailers • Tractor/rrailer with Jeeps • Transfer Dump • Transfer Vehicle • Transit Bus • Trolley • Utility Truck • Winch Truck • Moderate mileage operation (less than 60;000 miles per year) Coverage under Morifor's Warranty requires thatjth9400 lication of • On /Off road vocations (10% or more off -road) products be properly approved pursuant to OpM'Meritor,:_Meritor • Moderate to frequent stops/starts (up to 10 stops per mile) CO. WAB and:.ZF engineering approvals Refer to:TP 9441 for axles;' SP :8320 for,tratier axles, `and /or contact Morltor egapd: specific± application approval:goestions: on any` product .line FRONT DRIVE /NON -DRIVE STEER AXLES - 2 /UNL /P &L FD -965 FG -941' MFS -6 -1628 MFS- 10- 143A -N MFS- 16- 122A -N MX -16 -120 FF -941 FG -943 MFS- 6 -162C MFS- 10- 144A -N MF8- 16- 143A -N MX -17 -140 FF -942 FH -941 MFS- 7- 113C -N MFS- 12- 143A -N RF -16 -145 MX -19 -140 FF =943 FH -945 MFS- 7- 153C -N MFS- 12- 144A -N MFS- 18- 133A -N MX -21 -140 FF -944 FH -946 MFS- 7- 163C -N MFS -12 -155 MFS- 20- 133A -N MX -21 -160 FF -946 FL -941 MFS -8- 1138 -N MFS- 13443A -N RF -21 -160 MX -23 -160 FF -961 FL -943 MFS -8- 1538 -N MFS- 13- 1'44A -N `' MX -10 -120 MX =23 -810 FF -966 MFS- 6- 151A -N MFS -8- 1638 -N MFS -13 -155 MX -12 -120 FF -967 MFS -6 -1538 MFS- 10 -122A MFS- 14- 143A -N MX -14 -120 CLUTCHES REAR DRIVE SINGLE AXLES - 2 /UNL/P &L 15.5" HD Clutch' 1 /100 /P &L MS -10 -113 RC -23 -160 MS -26 -616 15.5" TwinXTend 1 /100 /P &L RS- 13.120 RH -23 -160 RS -26- 185/380 17 "' FreedomLine Clutch 1 /100 /P &L RS -15 -126 RS- 23.160 MS -30 -616 ' Products with an in- service date prior to 11101/02 warranted by Meritor Clutch MS- 17 -14X RS- 23.160 RH -30 -165 Company. RS- 17- 144/145/A RC- 23.161 RS -30- 185/380 MS- 19 -14X RH -23 -161 MS -35 -380 DRIVELINES — ' /IINL /P &L RS -19 -144 RS -23 -161 RS -38 -380 ................................................... ............................... MS -21 -114 RS -23- 186/380 RC -25 -160 RPL 92N RN MXL MS- 21 -14X RC -23 -162 RC -26 -633 RS -21 -145 RC -23 -165 MT -58 -616 RS- 21 -145/A RS -24 -160 71162 RS -21 -160 RS -25 -160 71163 RC -22 -145 RH -26 -185 INDUSTRIAL AND OFF - HIGHWAY SERVICE VEHICLES • Load -On /Load -Off • Yard Jockey • Specialized Mining • Rail Car Mover • Port Tractor • All-Terrain Crane • Excavator • Loader • Rail Yard Spotter • Rough Terrain Crane • Compactor • Tow Tractor • Roll =On /Roll -Off • Forestry • Fertilizer Spreader • Pushback Tractor • Stevedoring Tractor • Material Handling • Snow Blower MFS- 16- 122A -N • Trailer Spotter • Specialized Heavy Haul • Mining INDUSTRIAL AND OFF - HIGHWAY SERVICE TYPICALLY IS • Low mileage operation Coverage under Meritor's warranty requires that the application of products • Low speed vehicle speed restriction be properly approved pursuant to OEM, Meritor, Meritor WABCO, and ZF ... . • Vehicles are not typically licensed for highway use engineering approvals. Refer to 7- 9441,for axles and/or contact Meritor • Six (6) starts /stops per mile (typical) regarding specific application approval questions on product line DRIVE STEER AXLES - 1 /UNL /P ......... .......................................... ............................... MOR MOX MOC FRONT NON -DRIVE STEER AXLES -1 /UNL/P FF - 941 FL - 943 MFS- 16- 143A -N FF - 943 MFS- 12- 143A -N MFS- 18- 133A -N FF -961 MFS- 12- 144A -N MFS- 20- 133A -N FF - 966 MFS- 13- 143A -N MON -ZO FAMILY FG - 941 MFS- 13- 144A -N ' Includes: bushing, seal, cam and ASA. FG - 943 MFS- 14- 143A -N warranted or serviced by Meritor WABCO. Please contact your FL - 941 MFS- 16- 122A -N PLANETARY AXLES - 1 /UNL /P MOR MOX MOC MOT REAR DRIVE SINGLE AXLES -1 /UNL /P RS -23 -186 MS- 30-616 MS -35 -380 RS -23 -380 RS -30 -185 RS -24 -160 RS -30 -380 10 DRIVELINES -1 /UNL /P .......................................... ............................... RPL RN MXL REAR DRIVE TANDEM AXLES - 1 /UNL /P MT- 44 -14X/P MT -70 -380 RT- 46- 164EH /P MT -52 -616 RT- 44 -145/P RT -50 -160 /P MT -58 -616 RT- 46 -160/P BRAKE COMPONENTS Cam P 3 /Unl /P Cam O Plus'"' 3 /Unl/P &L ASA 3 /Unl /P Hubs /Cast Drums and Other Wheel -end Components 1 /Unl /P Hydraulic Disc Brakes 1 /Unl /P All Other Brakes 1 /1Jnl /P LX500 Feature' 1 /Unl/P ' Includes: bushing, seal, cam and ASA. Y Based on stamped wear diameter max. warranted or serviced by Meritor WABCO. Please contact your MERITOR WABCO COMPONENTS' ABS (Anti -Lock Braking System) Air /Hydraulic 3 /300 /P &L Air Dryers (ALL) 1 /100 /P &L Leveling Valves 1 /Unl /P &L Air Brake Valves 1/100/13 Clutch Controls 2 /200 /P &L Air Compressors' 1 /100/P &L Actuator 1 /100 /P &L Warranted by Meritor WABCO Vehicle Control Systems. ' WABCO compressors installed on Cummins, Mercedes, and DDC engines are not warranted or serviced by Meritor WABCO. Please contact your respective dealer/ distributor of those engines for warranty and servicing. COVERAGE EXCLUSIONS: .................................................... ............................... Product Description All The cost of any repairs, replacements or adjustments to a covered component (1) associated with noise; (2) resulting from the use or installation of non - genuine Meritor components or materials; (3) due to vibration associated with improper operation or misapplication of drivetrain components; and (4) damage resulting from corrosion. Front Axles King Pin Bushings. Rear Axles Self- contained traction equalizers and oil filters. The use of NoSPIN differentials will result in the exclusion of axle shafts from warranty considerations. NoSPIN is a product of Eaton. Clutch Friction face and mating surface of center and pressure plate, wear pads and clutch brake. ASA Boot and bushing. Bent, broken, over - torqued, missing or otherwise damaged pawl assemblies. ABS, Electronic Stability Control (ESC), Roll Stability Control (RSC) and OnGuard Cut, broken, chaffed or otherwise damaged cable wires. Damaged sensors from removal when seized in block, or sensor adjust- ments /alignments, Valve failures due to contamination in air system. E.C.U. failures due to excessive over - voltage conditions. Air Dryers Mounting brackets (see vehicle OEM). Desiccant cartridge housing only. Air System Components Gladhand seals, dash valve knobs, valve actuation handles, treadles, pedals. Water and other contamination damage that is due to the use of a non - genuine air dryer cartridge will not be covered. Cam Brake Brake lining wear and brake shoe "rust- jacking." Disc Brake Pad wear, rotor wear. COVERAGE LIMITATIONS: ..................................................... ............................... Product Description All Any claim beyond 60 days from date of repair will not be accepted or honored under this warranty program. Front Axles Tie rod and tie rod ends limited to 3- year /300,000 -mile or pub- lished vocational coverage, whichever is less. Wheel seals, gaskets and wheel bearings are covered for 1 year /unlimited miles if the wheel end equipment is supplied and assembled by Meritor: Rear Axles Pinion and through shaft seals limited to 3- year /300,000 -mile or published vocational coverage, whichever is less, if yoke is installed by Meritor. If yoke is not installed by Meritor, then Meritor does not warrant pinion seals. Wheel seals, gaskets and wheel bearings are covered for 1 year /unlimited miles if the wheel end equipment is supplied and assembled by Meritor. Rear Axles The Meritor® breather part number A- 2297 -C -8765 with A- 3196 -J -1336 hose must be used for eligibility of any potential warranty consideration relating to contamination and /or loss of lube in axles. Cam Brake Limited to bracket, brake spider and camshaft structural integrity. X30 Wearable life is up to the discard diameter of the drum. Disc Brake Warranty coverage for boots, seals, bushings and pins is 2/200/P. Warranty coverage for pads is 1/100/P. Warranty coverage on vehicles with 1,850 lb-ft engine torque and over may be reduced on individual drivetrain components. Contact your Meritor representative for specific details. (1) What is Covered by this Commercial Warranty?, Meritor Inc. warrants to the owner ( "Owner") that the components listed in this publication, which have been installed by an Original Equipment Manufacturer ( "OEM ") as original equipment in vehicles licensed for on- highway use, will be free from defects in material and workmanship. This warranty coverage begins only after the expiration of the OEM's vehicle warranty for the applicable covered components. Warranty coverage ends at the expiration of the applicable time period from the date of vehicle purchase by the first Owner, or, the applicable mileage limitation, whichever occurs first. Duration of coverage varies by component and vocation as detailed elsewhere in this warranty statement. Some components are warranted for parts only and the Owner must pay any labor costs associated with the repair or replacement of the component. Other components are warranted for both parts and reasonable labor to repair or replace the subject component. Components (whether new, used or remanufactured) installed as replacements under this warranty are warranted only for the remainder of the original period of time or mileage under the original warranty. For certain components, coverage requires the use of specific extended drain interval or, synthetic lubricants. For further information about lubrication and maintenance, see Meritor publication Maintenance Manual Number I and the applicable Meritor maintenance manual for the product in question. Other conditions and limitations applicable to this warranty are detailed below. (2) Designation of Vocational Use Required. To obtain warranty coverage, each Owner must notify Meritor through the OEM new truck and /or trailer dealer of the intended vocational use of the vehicle into which the Meritor components have been incorporated prior to the vehicle in- service date. This notification maybe accomplished by registering the vehicle through your OEM new truck and /or trailer dealer or with Meritor directly. Failure to notify Meritor of (1) the intended vocational use of the vehicle or (II) a change in vocational use from that which was originally designated, wilt result in the application of a one year, unlimited mileage, parts only warranty (1 /Unl /P) from the initial in- service date. A second Owner and each subsequent Owner must also notify Meritor as to the intended vocational use of the vehicle. This notification can be sent directly to Meritor or through the OEM new truck and/or trailer dealer. The duration and mileage coverage of this warranty cannot exceed the coverage extended to the first Owner after his or her initial designation of vocational use. Coverage under Meritor's warranty requires that the application of products be properly approved pursuant to OEM, Meritor, Meritor - WABCO, and ZF engineering approvals. Refer to TP -9441 for axles, SP-8320 for trailer axles, and /or contact Meritor regarding specific application approval questions on any product line. (3) What is the Cost of this Warranty? There is no charge to the Owner for this warranty. (4) What is not Covered by this Warranty? This warranty does not cover normal wear and tear; not does it cover a component that fails, malfunctions or is damaged as a result of (1) improper installation, adjustment, repair or modification (including the use of unauthorized attachments or changes or modification in the vehicle's configuration, usage, or vocation from that which was originally approved by Meritor), (II) accident, natural disaster, abuse, or improper use (including loading beyond the specified maximum . vehicle weight or altering engine power settings to exceed the transmission, axle, driveline, and/or clutch torque capacity), or (I1I) improper or insufficient maintenance (including deviation from approved lubricants, change intervals, or tube levels). This warranty does not cover any component or part is not sold by Meritor. For vehicles that operate full or part time outside of the United States and Canada, a one year, unlimited mileage, parts only warranty (1 /Unl /P) will apply. (5) Remedy. The exclusive remedy under this warranty shall be the repair or replacement of the defective component at Meritor's option. Meritor reserves the right to require that all applicable failed materials are available and /or returned to Meritor for review and evaluation. (6) Disclaimer of Warranty. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, EXPRESSED, IMPLIED OR STATUTORY INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE.. (7) Limitation of Remedies. In no event shall Meritor be liable for special, incidental, indirect, or consequential damages of any kind or under any legal theory, including, but not limited to, towing, downtime, lost productivity, cargo damage, taxes, or any other losses or costs resulting from a defective covered component. (8) To Obtain Service. If the Owner discovers within the applicable coverage period a defect in material or workmanship, the Owner must promptly give notice to either Meritor or the dealer from which the vehicle was purchased. To obtain service, the vehicle must be taken to any participating OEM new truck and /or trailer dealer or authorized Meritor service location. The dealer will inspect the vehicle and contact Meritor for an evaluation of the claim. When authorized by Meritor, the dealer will repair or replace during the term of this warranty any defective Meritor component covered by this warranty. (9) Entire Agreement. This is the entire agreement between Meritor and the Owner about warranty and no Meritor employee or dealer is authorized to make any additional warranty on behalf of Meritor. This agreement allocates the responsibilities for component failure between Meritor and the Owner. = 0-40 410) : For more information: Meritor Heavy Vehicle Systems, LLC 866- OnTracl (866- 668 -7221) 2135 West Maple Road Litho in USA 02012 Meritor „Inc. meriter.eom Troy, Michigan 48084 USA SP-95155 Revised 06- 12(471165/11900) Vehicle models. brands and names depicted herein are the prop” of their respective owners. and are not In my way associated with Modtor. Inc., or Its afritlate&